Komponentenstruktur: CAD Bauteile suchen & finden | 3Dfindit

Filter

Cone angle R-type locating pin for clamps;Non-shoulder nut fixed type

DABRMR,DABRMRL,DABTMR,DABTMRL

Cone angle R-type locating pin for clamps;Non...

36

Shoulderless type/Set screw type/For welding jigs/Cannonball type

DAKCJR,DAKCJRH,DAKCJRN,DAKEJR,DAKEJRH,DAKEJRN

Shoulderless type/Set screw ...

36

Shoulderless type/external thread type/for welding jig/cannonball type

DAKHJR,DAKHJRH,DAKHJRN,DAKJJR,DAKJJRH,DAKJJRN

Shoulderless type/external t...

36

Positioning pin - shoulder less type, nut fixed type/stop screw type - for ordinary grade fixtures - front end shape selection type

Positioning pin - shoulder less type, nut fixed type/stop screw type - for ordin...

112

Positioning pins - Shoulderless type - Short stop screw section - Ring groove/notch type - Precision grade fixture - Front end shape selection type

Positioning pins - Shoulderless type - Short stop screw section - Ring groove/no...

48

Positioning pin - shoulder less type, stop screw short type, ring groove type/notch type - for ordinary grade fixtures - front end shape selection type

Positioning pin - shoulder less type, stop screw short type, ring groove type/no...

48

Positioning for pins - shoulder less type, nut fixed type/stop screw type - for precision grade fixtures - front end shape selection type

Positioning for pins - shoulder less type, nut fixed type/stop screw type - for...

112

Positioning pin - shoulder less type, bolt fixed type/stop screw type - for fixture use, cone angle R-type

Positioning pin - shoulder less type, bolt fixed type/stop screw type - for fixtur...

94

Positioning pin - shoulder less type · nut fixing type - for fixture use · cone angle R-type

Positioning pin - shoulder less type · nut fixing type - for fixture use · cone angle...

36

BUTTON DIESーSTRAIGHT TYPEー

BUTTON DIESーSTRAIGHT TYPEー

15

Medical liner shoulder free standard type/thin-walled type

Medical liner shoulder free standard type/thin-walled type

24

Feed pin - Shoulderless type · Standard type/Internal thread type/External thread type - Round type/Triangle type

Feed pin - Shoulderless type · Standard type/Internal thread type/Ext...

160

Aluminium-Flachprofile - Schlitz

HFSQN4-1520, HFSQN4-1540, HFSQN4-1570, HFSQN4-15100, HFSQN4-15250

Aluminium-Flac...

5

Aluminium-Flachprofile - Schlitz

HFSQN4-1020, HFSQN4-1030, HFSQN4-1050, HFSQN4-1070

Aluminium-Flachprofile - S...

4

Aluminium-Flachprofile - Schlitz

HFSQN4-2050, HFSQN4-2090

Aluminium-Flachprofile - Schlitz

2

SPECIAL SHAPED BUTTON DIESーSTRAIGHT TYPEー

SPECIAL SHAPED BUTTON DIESーSTRAIGHT TYPEー

14

Feed pin · Shoulderless · Standard/internal thread/External thread type

Feed pin · Shoulderless · Standard/internal thread/External thread type

160

GUIDE BUSHINGS

14

GUIDE BUSHINGS

45

BLOCK DIES−STRAIGHT TYPE−

BLOCK DIES−STRAIGHT TYPE−

7

Pillar pin · Step type · Shoulder less type/shoulder type

Pillar pin · Step type · Shoulder less type/shoulder type

144

BLKCP Series

24

Bushing for miniature ball bushing guide shaft - Compact - shouldered / shouldered

Bushing for miniature ball bushing guide shaft - Compact - shouldered / s...

32

Bushing for locating pins - D hole type - shoulder less/shoulder type

Bushing for locating pins - D hole type - shoulder less/shoulder t...

24

Fixture Bushing - L Size Specification Type · Pressed in Type - Shoulderless/Shouldered

Fixture Bushing - L Size Specification Type · Pressed in Type - Shoulder...

111

Inspection fixture liner - shoulder free - regular/pressed in type

Inspection fixture liner - shoulder free - regular/pressed in type

162

Bushing for locating pin, shoulderless type • with oil groove

Bushing for locating pin, shoulderless type • with oil groove

20

The positioning pin stop screw part for fixture is short, ordinary grade, and the shape of the front end is shoulder free ring groove type

The positioning pin stop screw part for fixture is short, ordinary grade, and the s...

4

The positioning pin stop screw part for fixture is short, ordinary grade, and the shape of the front end is shoulder free cutting type

The positioning pin stop screw part for fixture is short, ordinary grade, and the s...

4

Positioning pins - shoulder type/shoulder less type - fixed with stop screws - for welding fixtures - bullet shaped

Positioning pins - shoulder type/shoulder less type - fixed with stop screw...

66

Positioning pins - Shoulder type/Shoulderless type - External thread type - Used for welding fixtures - Cannon shaped

Positioning pins - Shoulder type/Shoulderless type - External thread type - U...

66

Bushing for miniature ball bushing guide shaft - Compact - shouldered / shouldered

Bushing for miniature ball bushing guide shaft - Compact - shouldered / s...

4

Zentrierstifte für Prüfeinrichtungen - konfigurierbare Ausführung - ohne Bund - mit Mutter - mit Oberflächenbehandlung

D-FNNA, R-FNNA, H-FNNA, D-FNND, R-FNND, H-FNND

Zentrierstifte für Prüfeinrichtung...

7

Locating Pins for Fixtures - Precision Grade, Configurable - No Shoulder - Set Screw - With Surface Treatment

D-FNTA, R-FNTA, H-FNTA, D-FNTD, R-FNTD, H-FNTD

Locating Pins for Fixtures - Preci...

4

Locating Pins for Fixtures Standard Grade, Bullet Nose - No Shoulder - With Surface Treatment

Locating Pins for Fixtures Standard Grade, Bullet Nose - N...

4

Zentrierstifte für Prüfeinrichtungen - kurze Standardausführung mit Stellschraube - mit Kerbe - ohne Bund - Spitzenform Standard/frei wählbar - mit Oberflächenbehandlung

D-LNCAA, D-LNCDA, R-LNCAA, R-LNCDA, D-LNCAB, D-LNCDB, R-LNC...

4

Locating Pins for Fixtures - Standard Grade, Short Set Screw - Set Screw Mount (h7) - No Shoulder - With Surface Treatment

D-LNSA, D-LNSD, R-LNSA, R-LNSD, H-LNSA, H-LNSD

Locating Pins for Fixtures - Stan...

4

Locating Pins for Fixtures - Standard Grade, Short Set Screw - Tip Shape Selectable, Set Screw Mount (h7) - No Shoulder - With Surface Treatment

D-LNSAA, D-LNSDA, R-LNSAA, R-LNSDA, H-LNSAA, H-LNSDA, D-LNS...

4

Zentrierstifte für Prüfeinrichtungen - kurze Präzisionsausführung mit Stellschraube - umlaufende Nut - ohne Bund - Spitzenform Standard/frei wählbar - mit Oberflächenbehandlung

D-NSTA, D-NSTD, R-NSTA, R-NSTD, H-NSTA, H-NSTD, D-NSTAA, D-NSTDA, R-NST...

4

Locating Pins for Fixtures - Standard Grade, Round Edge - Tip Shape Selectable - No Shoulder - Threaded - With Surface Treatment

D-RNNAA, D-RNNAB, D-RNNDA, D-RNNDB

Locating Pins for Fixtures - Stan...

4

Locating Pins for Fixtures - Standard Grade, Round Edge - Tip Shape Selectable - No Shoulder - Set Screw - With Surface Treatment

D-RNTAA, D-RNTAB, D-RNTDA, D-RNTDB

Locating Pins for Fixtures - Stan...

4

Locating Pins for Fixtures - Standard Grade, Screw Mounted - No Shoulder

ELNBA, ELNBD, TELNBA, TELNBD

Locating Pins for Fixtures - Standard Grade...

6

Locating Pins for Fixtures - Standard Grade, Short Set Screw - Tip Shape Selectable, Notch - No Shoulder - No Surface Treatment

ELNCAA, ELNCDA, TELNCAA, TELNCDA, ELNCAB, ELNCDB, TELN...

6

Locating Pins for Fixtures - Screw Mounted - Tip Shape Selectable - No Shoulder

ELNBAA, ELNBDA, TELNBAA, TELNBDA, ELNBAB, ELNBDB, TELN...

6

Locating Pins for Fixtures - Standard Grade, Short Set Screw - Set Screw Mount (h7) - No Shoulder - No Surface Treatment

ELNSA, ELNSD, TELNSA, TELNSD

Locating Pins for Fixtures - Standard Grade, Short Set Screw...

6

Locating Pins for Fixtures - Standard Grade, Short Set Screw - Tip Shape Selectable, Set Screw Mount (h7) - No Shoulder - No Surface Treatment

ELNSAA, ELNSDA, TELNSAA, TELNSDA, ELNSAB, ELNSDB, TELN...

6

Locating Pins for Fixtures - Precision Grade, Configurable - No Shoulder - Threaded - No Surface Treatment

FLNNA, FLNND, FTLNNA, FTLNND, FSLNNA, FSLNND, FCLNNA, FCLN...

9

Locating Pins for Fixtures - Precision Grade, Configurable - No Shoulder - Set Screw - No Surface Treatment

FLNTA, FLNTD, FTLNTA, FTLNTD, FSLNTA, FSLNTD, FCLNTA, FCLNTD

6

Locating Pins for Fixtures Standard Grade, Bullet Nose - No Shoulder - No Surface Treatment

HNTAX, HNTD, THNTA, THNTD

Locating Pins for Fixtures Standard Grade, Bullet Nose - No Shoul...

6

Zentrierstifte für Prüfeinrichtungen - Ausführung mit Fixierbolzen - Spitzenform frei wählbar - ohne Bund - Präzisionsausführung

LNBAN, LNBDN, TLNBAN, TLNBDN, LNBANA, LNBDNA, TLNBANA, TLN...

7