Create a simple sketch to find similar parts
Recherche 2D
Sketch the part you are looking for or have a photo described in text form
Recherche 2D
Create image description with AI
Drop file hereou
Formats de fichiers supportés: .PNG, .JPG, .JPEG, .WEBP
DIN1X
| DIN 1 A | Taper pins, form A |
| DIN 1 B | Taper pins, form B |
| DIN 1013-1 | Hot-rolled rounds for general purposes, part 1 |
| DIN 1013-2 | Hot-rolled rounds for general purposes, part 2 |
| DIN 1014-1 | Hot-rolled squares for general purposes, part 1 |
| DIN 1014-2 | Hot-rolled squares for general purposes, part 2 |
| DIN 1015 | Hot-rolled hexagons |
| DIN 1016 | Hot-rolled strip and hot rolled sheet |
| DIN 1017-1 | Hot-rolled flats for general purposes, sheet 1 |
| DIN 1017-2 | Hot rolled flats for special application, sheet 2 |
| DIN 1018 | Hot rolled half-rounds and flat half-ovals |
| DIN 1019 | Hot-rolled bulb flats |
| DIN 1022 | Hot-rolled square root equal angles (LS-steel) |
| DIN 1024 T | Hot-rolled T-bars with round edges, form T |
| DIN 1024 TB | Hot-rolled T-bars with round edges, form TB |
| DIN 1025-1 | Hot rolled I-beams - Part 1: narrow flange I-beams, I-serie |
| DIN 1025-2 | Hot rolled I-beams - Part 2: I-girder, IPB-row |
| DIN 1025-3 | Hot rolled I-beams, bright I-girder, light type, IPBI row |
| DIN 1025-4 | Hot rolled I-beams, bright I-girder, heightened type, IPBv row |
| DIN 1025-5 | Hot rolled I-beams, Medium flange I-beams, IPE-serie |
| DIN 1026-1 | Hot-rolled steel channels - Part 1: Taper flange steel channels |
| DIN 1026-2 | Hot-rolled steel channels - Part 2: Parallel flange steel channels |
| DIN 1027 | Hot-rolled zees with round edges |
| DIN 1028 | Hot-rolled equal leg angles with round edges |
| DIN 1029 | Hot-rolled unequal leg angles with round edges |
| DIN 1052 | Dowels |
| DIN 11023 | Linch pin |
| DIN 11024 | Spring cotter |
| DIN 111 | Flat pulleys |
| DIN 1142 | Rope clamps for cable end connections |
| DIN 1142 SA | Clamping jaws for wire end connections |
| DIN 1142 SB | Clamping jaws for wire end connections |
| DIN 1142 SC | Collar nuts for wire ends |
| DIN 1143-1 | Nails for use in automatic nailing machines |
| DIN 1144 A | Nails for light weight building slabs, form A |
| DIN 1144 B | Nails for light weight building slabs, form B |
| DIN 115 | Insertion rings |
| DIN 1151 A | Round plain head nails, form A |
| DIN 115-1 A | Clamp couplings, form A |
| DIN 115-1 AS | Clamp couplings, form AS |
| DIN 1151 B | Round plain head nails, form B |
| DIN 115-1 B | Clamp couplings, form B |
| DIN 115-1 BS | Clamp couplings, form BS |
| DIN 115-1 C | Clamp couplings, form C |
| DIN 115-1 CS | Clamp couplings, form CS |
| DIN 1152 | Round nails with cold headed head |
| DIN 115-2 | Ring for clamp couplings |
| DIN 1157 | Tin tacks |
| DIN 1158 | Hook nails |
| DIN 116 A | Flange couplings |
| DIN 116 B | Flange couplings |
| DIN 116 C | Flange couplings |
| DIN 1163 | Molder pins |
| DIN 11850 | Pipes of rustfree steel for food |
| DIN 11851 C | Stainless steel screwed pipe connections, form C |
| DIN 11851 D | Stainless steel screwed pipe connections, form D |
| DIN 11851 F | Stainless steel screwed pipe connections, form F |
| DIN 11851 G | Stainless steel screwed pipe connections, form G |
| DIN 11851 S | Stainless steel screwed pipe connections, form S |
| DIN 11851 SC | Stainless steel screwed pipe connections, form SC |
| DIN 11851 SD | Stainless steel screwed pipe connections, form SD |
| DIN 11851 SK | Stainless steel screwed pipe connections, form SK |
| DIN 11851 SKC | Stainless steel screwed pipe connections, form SKC |
| DIN 11851 SKD | Stainless steel screwed pipe connections, form SKD |
| DIN 11851 W | Stainless steel screwed pipe connections, form W |
| DIN 11852 BA5-90 | Fittings of stainless steel, form BA5-180 |
| DIN 11852 BL-45 | Fittings of stainless steel, form BL-45 |
| DIN 11852 BL-90 | Fittings of stainless steel, form BL-90 |
| DIN 11852 BS-180 | Fittings of stainless steel, form BS-180 |
| DIN 11852 BS-45 | Fittings of stainless steel, form BS-45 |
| DIN 11852 BS-90 | Fittings of stainless steel, form BS-90 |
| DIN 11852 RE | Fittings of stainless steel, form RE |
| DIN 11852 RK | Fittings of stainless steel, form RK |
| DIN 11852 RTK | Fittings of stainless steel, form RTK |
| DIN 11852 RTS | Fittings of stainless steel, form RTS |
| DIN 11852 TK | Fittings of stainless steel, form TK |
| DIN 11852 TS | Fittings of stainless steel, form TS |
| DIN 11853-2 BBF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 BF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 BNF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 F | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 NF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 R | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11864 FD | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864 R | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 A | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 B | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form B |
| DIN 11864-1 BS-A | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 BS-B | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form B |
| DIN 11864-1 GS-A | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 GS-B | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form B |
| DIN 11864-2 A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-2 B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-2 BF-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-2 BF-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-2 NF-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-2 NF-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-3 A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 3: Aseptic clamp pipe connection, standard type, form A |
| DIN 11864-3 B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 3: Aseptic clamp pipe connection, standard type, form B |
| DIN 11864-3 BKS-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-3 BKS-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-3 NKS-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-3 NKS-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11865 BL-45 A | Elbows for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 BL-45 B | Elbows for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 BL-45 C | Elbows for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 BL-90 A | Elbows for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 BL-90 B | Elbows for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 BL-90 C | Elbows for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 RE-A | Reducing pieces for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 RE-B | Reducing pieces for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 RE-C | Reducing pieces for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 RK-A | Reducing pieces for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 RK-B | Reducing pieces for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 RK-C | Reducing pieces for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 T-A | Tees for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 T-B | Tees for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 T-C | Tees for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 TK-A | Tees for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 TK-B | Tees for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 TK-C | Tees for welding stainless steel, pipe series C to DIN 11866 |
| DIN 124 | Round head rivets, nominal diameters 10 to 36 mm, form A/B |
| DIN 125-1 A | Washers, product grade A, up to hardness 250 HV, primarily for hexagon bolts and nuts, form A |
| DIN 125-1 B | Washers, product grade A, up to hardness 250 HV, primarily for hexagon bolts and nuts, form B |
| DIN 125-2 A | Washers, product grade A, from hardness 300 HV, primarily for hexagon bolts and nuts, form A |
| DIN 125-2 B | Washers, product grade A, from hardness 300 HV, primarily for hexagon bolts and nuts, form B |
| DIN 126 | Washers, product grade C, primarily for hexagon bolts and nuts |
| DIN 127 A | Spring lock washers, form A |
| DIN 127 B | Spring lock washers, form B |
| DIN 128 A | Curved spring lock washers |
| DIN 12871 | Laboratory apparatus in rubber and plastics; Elastomer stoppers |
| DIN 133 | Slugging wrenches, open end |
| DIN 137 A | Curved spring washers |
| DIN 137 B | Wave spring washers |
| DIN 14301 | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301-1 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301-2 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301-3 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301-4 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14306 D | Aluminium alloy solid coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14306-1 DS | Aluminium alloy solid coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14306-3 DS | Aluminium alloy solid coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14307-2 | Solid coupling type C |
| DIN 14307-2 1-S | Cam part |
| DIN 14307-2 3 | Flat sealing ring |
| DIN 14310 | Aluminium alloy cap fire hose coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14310-2 DS | Aluminium alloy cap fire hose coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14311 | Cap |
| DIN 14321 4-S | Gasket |
| DIN 14321-2 S | Aluminium alloy suction coupling type C, nominal pressure 16 |
| DIN 1433 | Clevis pins without head |
| DIN 14331-4 S | Aluminium alloy suction coupling type C, nominal pressure 16 |
| DIN 14334 | Solid couplings Storz System PN 16 for delivery and suction |
| DIN 14334 1 | Solid couplings Storz System PN 16 for delivery and suction, latch part (Item No. 1) |
| DIN 14334 2 | Fixed coupling system Storz PN 16 for pressure and suction operation, sealing ring Storz, pressure (item no.2) |
| DIN 14334 2 | Fixed coupling system Storz PN 16 for pressure and suction operation, sealing ring Storz, suction (item no.2) |
| DIN 14334 3 | Fixed coupling system Storz PN 16 for pressure and suction operation, flat sealing ring (item no.3) |
| DIN 1434 A | Clevis pins with small head, without cotter pin hole, form A |
| DIN 1434 B | Clevis pins with small head, with cotter pin hole, form B |
| DIN 1435 | Clevis pins with small head, finish mg |
| DIN 1436 | Clevis pins with large head, finish mg |
| DIN 1440 | Washers for clevis pins, medium finish |
| DIN 1441 | Washers for clevis pins, finish coarse |
| DIN 1443 A | Clevis pins without head, form A |
| DIN 1443 B | Clevis pins without head, form B |
| DIN 1444 A | Clevis pins with head, no cotter pin hole, form A |
| DIN 1444 B | Clevis pins with head, with cotter pin hole, form B |
| DIN 1445 | Clevin pins with head and thread pin |
| DIN 1469 A | Fitting grooved pins with neck, form A |
| DIN 1469 B | Fitting grooved pins with neck, form B |
| DIN 1469 C | Fitting grooved pins with neck, form C |
| DIN 1470 | Grooved pins, full length parallel grooved mit pilot |
| DIN 1471 | Grooved pins, full length taper grooved |
| DIN 1472 | Feather grooved pins |
| DIN 1473 | Grooved pins |
| DIN 1474 | Grooved pins, half length reverse grooved |
| DIN 1475 | Grooved pins, third length center grooved |
| DIN 1476 | Round head grooved pins |
| DIN 1477 | Countersunk head grooved pins |
| DIN 1478 | Turnbuckles made from tubes or bars |
| DIN 1479 | Hexagon turnbuckles |
| DIN 1480 | Forged turnbuckles (open form) |
| DIN 1481 | Clamping pins |
| DIN 1494 | Wrapped bushes for plain bearings |
| DIN 1498 EG | Tension bushes without countersink E with straight slot G |
| DIN 1498 EP | Tension bushes without countersink E with arrow shaped slot P |
| DIN 1498 ES | Tension bushes without countersink E with inclined slot S |
| DIN 1498 EW | Tension bushes without countersink E with wavy slot W |
| DIN 1498 FG | Tension bushes with countersink F with straight slot G |
| DIN 1498 FP | Tension bushes with countersink F with arrow shaped slot P |
| DIN 1498 FS | Tension bushes with countersink F with inclined slot S |
| DIN 1498 FW | Tension bushes with countersink F with wavy slot W |
| DIN 1499 AG | Tension bush with countersink A with straight slot G |
| DIN 1499 AP | Tension bushes with countersink A with arrow shaped slot P |
| DIN 1499 AS | Tension bushes with countersink A with inclined slot S |
| DIN 1499 AW | Tension bushes with countersink A with wavy slot W |
| DIN 15058 | Axle holder |
| DIN 15062 A | Cranes, sheaves for wire ropes, form A |
| DIN 15062 B | Cranes, sheaves for wire ropes, form B |
| DIN 15062 C | Cranes, sheaves for wire ropes, form C |
| DIN 15062 D | Cranes, sheaves for wire ropes, form D |
| DIN 15078 B | Cranes; flanged crane rail wheels; with roller bearings without gear wheel, form B wide wheel |
| DIN 15078 S | Cranes; flanged crane rail wheels; with roller bearings without gear wheel, form S narrow wheel |
| DIN 15084 A | Cranes, crane rail wheels with roller bearing covers, form A with grooved gasket |
| DIN 15084 B | Cranes, crane rail wheels with roller bearing covers, form B for radial shaft seals |
| DIN 15155 N | Box pallets, form N |
| DIN 15155 Y | Mesh box pallets - Exchange pallets, form Y |
| DIN 15207-1 A1 | Idlers for belt conveyors, form A1 |
| DIN 15207-1 A2 | Idlers for belt conveyors, form A2 |
| DIN 15207-1 B2 | Idlers for belt conveyors, form B2 |
| DIN 15207-1 C2 | Idlers for belt conveyors, form C2 |
| DIN 15207-1 G1 | Idlers for belt conveyors, form G1 |
| DIN 15207-1 G2 | Idlers for belt conveyors, form G2 |
| DIN 15237 | Seating screws |
| DIN 15237 Mu | Continuous mechanical handling equipment, seating screws with hexagon nuts DIN 555 |
| DIN 15237 TS | Cupped washers |
| DIN 1530-1 A | Ejector pins with cylindrical head |
| DIN 1530-2 C | Shouldered ejector pins with cylindrical head |
| DIN 1530-3 D | Ejector pins with conical head |
| DIN 1530-4 F | Ejector pins with cylindrical head, with rectangular reduced shank (flat ejector pins) |
| DIN 15315 | Wire locks |
| DIN 15315 1 | Cable wedge chassis |
| DIN 15315 2 | Cable wedges |
| DIN 15401-1 RF | Shank hooks, form RF |
| DIN 15401-1 RFN | Shank hooks, form RFN |
| DIN 15401-1 RSN | Shank hooks, form RSN |
| DIN 15401-2 | Shank hook |
| DIN 15401-2 GF | Shank hooks with a point, form GF |
| DIN 15401-2 GFN | Shank hooks with a point, form GFN |
| DIN 15401-2 GS | Shank hooks with a point, form GS |
| DIN 15401-2 GSN | Shank hooks with a point, form GSN |
| DIN 15402-1 RF | Ramshorn shank hooks, form RF |
| DIN 15402-1 RFN | Ramshorn shank hooks, form RFN |
| DIN 15402-1 RS | Ramshorn shank hooks, form RS |
| DIN 15402-1 RSN | Ramshorn shank hooks, form RSN |
| DIN 15402-2 | Ramshorn shank hook |
| DIN 15402-2 GF | Ramshorn shank hooks, form GF |
| DIN 15402-2 GFN | Ramshorn shank hooks, form GFN |
| DIN 15402-2 GS | Ramshorn shank hooks, form GS |
| DIN 15402-2 GSN | Ramshorn shank hooks, form GSN |
| DIN 15413 A | Hook nuts for cranes, form A |
| DIN 15413 B | Hook nuts for cranes, form B |
| DIN 15413 C | Hook nuts for cranes, form C |
| DIN 15414 | Bottom hook blocks, nut lecking devices for cranes |
| DIN 1543 | Steel plates above 4.75 mm (heavy plate) |
| DIN 15432 A | Brake discs |
| DIN 15432 B | Brake discs |
| DIN 1544 | Cold rolled steel strip |
| DIN 1552-1 B | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form B |
| DIN 1552-1 BA | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form BA |
| DIN 1552-1 C | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form C |
| DIN 1552-1 CA | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form CA |
| DIN 1552-2 D | Bushes for railway vehicles - Part 2: Press-fit bushes of steel |
| DIN 1564 | Sockets |
| DIN 1564 | Reducing sockets |
| DIN 1565 | Double nipple |
| DIN 1565 | Reducing nipple |
| DIN 1565 | Pipe nipple |
| DIN 1566 | Double nipple |
| DIN 1566 | Reducing double nipple |
| DIN 1567 | Reducing-T |
| DIN 1567 | T-pieces |
| DIN 1568 | Cross pieces |
| DIN 1569 W | Angles |
| DIN 1569 Y | Y-pieces |
| DIN 1570 | Hot-rolled ribbed and grooved spring steel |
| DIN 1573 A | Plates with groove, form A |
| DIN 1573 B | Plates with wart, form B |
| DIN 1573 C | Plates with nose, form C |
| DIN 1573 D | Keys, form D |
| DIN 1578 | Snap rings for wheel tyres |
| DIN 1585 A | Handles |
| DIN 1585 B | Handles |
| DIN 1585 C | Handles |
| DIN 1587 A | Hexagon cap nuts, height type, type A |
| DIN 1587 B | Hexagon cap nuts, height type, type B |
| DIN 1592 | Heavy pipe clips with pipe-tightening, single-ended for rail vehicles |
| DIN 1593 | Heavy pipe clips with pipe-tightening, double-ended for rail vehicles |
| DIN 1595 B | Knobs, form B |
| DIN 1595 C | Knobs, form C |
| DIN 1595 D | Knobs, form D |
| DIN 1595 H | Knob screws, form H |
| DIN 1595 J | Coat buttons, form J |
| DIN 1596 | Light pipe clips with pipe-tightening, single-ended for rail vehicles |
| DIN 1597 | Light pipe clips with pipe-tightening, double-ended for rail vehicles |
| DIN 16168 B | Machine glass thermometers with round housing, form B |
| DIN 16168 C | Machine glass thermometers with round housing, form C |
| DIN 16181 B | Thermometers, form B |
| DIN 16181 B1 | Thermometers, form B1 |
| DIN 16181 C | Thermometers, form C |
| DIN 16185 B | Top V-shape straight type glass thermometers, form B |
| DIN 16185 C | Top V-shape straight type glass thermometers, form C |
| DIN 16185 G | Housing |
| DIN 16185 TH | Thermometer employments |
| DIN 16186 B | Top V-shape 90° angle type glass thermometers of nominal size 150, form B |
| DIN 16186 C | Top V-shape 90° angle type glass thermometers of nominal size 150, form C |
| DIN 16186 G | Housing |
| DIN 16186 S | Top V-shape 90° angle type glass thermometers of nominal size 150, form S |
| DIN 16186 TH | Thermometer employments |
| DIN 16189 | Sheet glass thermometers with V-shaped cabinet |
| DIN 16189 G | Housing |
| DIN 16189 TH | Thermometer employments |
| DIN 1623-2 | Cold rolled bands and sheets |
| DIN 16262 A | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges, form A |
| DIN 16262 B | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges, form B |
| DIN 16270 A | PN 250 and PN 400 valves without test connection for pressure gauges, form A |
| DIN 16270 B | PN 250 and PN 400 valves without test connection for pressure gauges, form B |
| DIN 16271 A | PN 250 and PN 400 valves with test connection for pressure gauges, form A |
| DIN 16271 B | PN 250 and PN 400 valves with test connection for pressure gauges, form B |
| DIN 16272 A | PN 250 and PN 400 valves with blocking test connection for pressure gauges, form A |
| DIN 16272 B | PN 250 and PN 400 valves with blocking test connection for pressure gauges, form B |
| DIN 16281 | Adapter for pressure gauges |
| DIN 16281 A(G) | Measuring device holder for wall, pipe and frame mounting in cast construction, form A(G) |
| DIN 16281 A(S) | Measuring device holder for wall, pipe and frame mounting in welded construction, form A(S) |
| DIN 16281 H(G) | Measuring device holder for wall mounting in cast construction, form H (G) |
| DIN 16281 H(S) | Measuring device holder for wall mounting in welded construction, form H(S) |
| DIN 16282 | Connection spigot for siphons of types B and D (with left-hand thread for clamping sleeve) |
| DIN 16282 | Connection spigot for siphons of types A and C (pressure tapping side) |
| DIN 16282 A | Water sack pipes for horizontal, form A |
| DIN 16282 B | Water sack pipes for horizontal, form B |
| DIN 16282 C | Siphons for vertical pressure extraction (circular shape), with connection spigot on the pressure extraction side, form C |
| DIN 16282 D | Siphons for vertical pressure extraction (circular shape), with welding connection on the pressure extraction side, form D |
| DIN 16282 F | Siphons for horizontal pressure extraction, with welded connection on both sides, form F |
| DIN 16282 G | Siphons for vertical pressure extraction (circular shape), with welded connection on both sides, form G |
| DIN 16282 P | Compact siphon, form P |
| DIN 16282 T | Compact siphon, form T |
| DIN 16283 | Adjusting nuts |
| DIN 16284 | Nipple connections for pressure gauges and their accessories |
| DIN 16284 | Swivel nuts |
| DIN 16284 | Nipples |
| DIN 16716 C | Guide bushes of steel, form C |
| DIN 16716 E | Guide bushes of steel, form E |
| DIN 16752 C | Sprue bushes, form C |
| DIN 16752 D | Sprue bushes, form D |
| DIN 16756 | Ejector sleeves with cylindrical head |
| DIN 16757 | Sprue puller |
| DIN 16759 | Centering sleeves |
| DIN 16761 A | Guide pillars, form A |
| DIN 16761 B | Guide pillars, form B |
| DIN 16842 | Pipes made of polyethylene (PE) - PE-HD for pressureless applications |
| DIN 16893 | Crosslinked Polyethylene (PE-X) pipes |
| DIN 16903-1 A | Open insert nuts for plastics mouldings, form A |
| DIN 16903-1 B | Open insert nuts for plastics mouldings, form B |
| DIN 16903-1 C | Open insert nuts for plastics mouldings, form C |
| DIN 16903-1 D | Open insert nuts for plastics mouldings, form D |
| DIN 16903-2 E | Closed insert nuts with disk for plastics mouldings, form E |
| DIN 16903-2 F | Closed insert nuts with disk for plastics mouldings, form F |
| DIN 16903-2 G | Closed insert nuts with disk for plastics mouldings, form G |
| DIN 16903-2 H | Closed insert nuts with disk for plastics mouldings, form H |
| DIN 16903-3 P | Closed insert nuts with dead hole for plastics mouldings, form P |
| DIN 16903-3 Q | Closed insert nuts with dead hole for plastics mouldings, form Q |
| DIN 16903-3 R | Closed insert nuts with dead hole for plastics mouldings, form R |
| DIN 16903-3 S | Closed insert nuts with dead hole for plastics mouldings, form ´S |
| DIN 16903-4 T | Insert nuts, heavy type for plastics mouldings and pressure die castings, form T |
| DIN 16903-4 U | Insert nuts, heavy type for plastics mouldings and pressure die castings, form U |
| DIN 16965 PN 10 | Pipes of glass fibre reinforced polyester resins; wound, pipetype B, nominal pressure PN 10 |
| DIN 16965 PN 16 | Pipes of glass fibre reinforced polyester resins; wound, pipetype B, nominal pressure PN 16 |
| DIN 16965 PN 6 | Pipes of glass fibre reinforced polyester resins; wound, pipetype B, nominal pressure PN 6 |
| DIN 16966-2 E1 | Pipe joints and their elements of glass fibre rein forced polyester resins; elbows 90°, form E1 |
| DIN 16966-2 E2 | Pipe joints and their elements of glass fibre rein forced polyester resins; elbows 45°, form E2 |
| DIN 16966-4 S1 | Pipe joints and their elements of glass fibre rein forced polyester resins; nozzles, form S1 |
| DIN 16966-4 S2 | Pipe joints and their elements of glass fibre rein forced polyester resins; nozzles, form S2 |
| DIN 16966-4 T1 | Pipe joints and their elements of glass fibre rein forced polyester resins; tees 90°, form T1 |
| DIN 16966-4 T2 | Pipe joints and their elements of glass fibre rein forced polyester resins; tees 90°, form T2 |
| DIN 16966-5 C1 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C1 |
| DIN 16966-5 C2 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C2 |
| DIN 16966-5 C3 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C3 |
| DIN 16966-5 C4 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C4 |
| DIN 16966-5 X1 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X1 |
| DIN 16966-5 X2 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X2 |
| DIN 16966-5 X3 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X3 |
| DIN 16966-5 X4 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X4 |
| DIN 16966-6 B1 | Pipe joints and their elements of glass fibre rein forced polyester resins; adhesive bands, form B1 |
| DIN 16966-6 B2 | Pipe joints and their elements of glass fibre rein forced polyester resins; molded bands, form B2 |
| DIN 16966-6 D | Pipe joints and their elements of glass fibre rein forced polyester resins; gaskets, form D |
| DIN 16966-6 DE | Pipe joints and their elements of glass fibre rein forced polyester resins; gaskets, form DE |
| DIN 16966-6 F1 | Pipe joints and their elements of glass fibre rein forced polyester resins; flanges, form F1 |
| DIN 16966-6 KD | Pipe joints and their elements of glass fibre rein forced polyester resins; gaskets, form KD |
| DIN 16966-6 V3 | Pipe joints and their elements of glass fibre rein forced polyester resins; fixed flanges, form V3 |
| DIN 16977 | Polyacetale (POM) sheets |
| DIN 16980 | Thermoplastics rods |
| DIN 16982 | Polyamid tubes of circular cross-section (PA) |
| DIN 16983 | Hollow rods of circular cross-section of polyamide (PA) |
| DIN 16984 | Polyamid (PA) sheets |
| DIN 16986 | Thermoplastics flats |
| DIN 172 A | Press fitting bushes |
| DIN 172 B | Press fitting bushes |
| DIN 173 | Clamping bushings |
| DIN 173-1 | Flat headed screws |
| DIN 173-1 K | Plug drill bushings |
| DIN 173-1 KL | Plug drill bushings |
| DIN 173-1 L | Plug drill bushings |
| DIN 173-2 E | Renewable jig bushes, form E |
| DIN 173-2 ER | Renewable jig bushes, form ER |
| DIN 173-2 ES | Renewable jig bushes, form ES |
| DIN 173-2 G | Renewable jig bushes, form G |
| DIN 173-2 H | Renewable jig bushes, form H |
| DIN 173-2 K | Head cap bolts, form K |
| DIN 1732-1 | Welding filler metals for aluminium and aluminium alloys |
| DIN 174 | Flat steel |
| DIN 175 | Polished round steel |
| DIN 1751 | Sheet of wrought copper and copper alloys |
| DIN 1754-1 | Tubes of copper, seamless drawn |
| DIN 1754-2 | Tubes of copper, seamless drawn |
| DIN 1754-3 | Tubes of copper, seamless drawn |
| DIN 1755-2 | Tubes of wrought copper alloys, seamless drawn, preferred dimensions for general purposes |
| DIN 1756 | Round rods of wrought copper and copper alloys |
| DIN 176 | Bright hexagon steel |
| DIN 177 | Steel wire, cold drawn |
| DIN 1771 | Angles of wrought aluminium and aluminium alloys |
| DIN 178 | Square steel |
| DIN 1783 | Sheets and strips of aluminium and aluminium alloy |
| DIN 1786 | Copper tubes for plumbing |
| DIN 179 A | Drill bushings |
| DIN 179 B | Drill bushings |
| DIN 1795 | Round tubes of wrought aluminium and aluminium alloys |
| DIN 1804 | Slotted round nuts for hook spanner |
| DIN 1810 A | Hook wrenches, form A |
| DIN 1810 B | Hook wrenches, form B |
| DIN 1814 | Tap wrenches, jaws movable |
| DIN 1816 | Round nuts with set pin holes inside |
| DIN 18182-4 | Accessories for use with gypsum plasterboards, nails |
| DIN 1823-1 A | Angular cutters for toolmaking, form A |
| DIN 1823-1 B | Angular cutters for toolmaking, form B |
| DIN 1824 A | Tool-making angular cutters for tools with relieved teeth, form A |
| DIN 1824 B | Tool-making angular cutters for tools with relieved teeth, form B |
| DIN 18251 ES | Locks - Mortise locks and multipoint locks, lock case |
| DIN 18264 | Spring hinges for doors, single action |
| DIN 1830-1 EB | Inserted blade face milling cutters for internal alignment on spindle-noses according to DIN 2079, form EB |
| DIN 1830-1 PB | Inserted blade face milling cutters for internal alignment on spindle-noses according to DIN 2079, form PB |
| DIN 1830-3 EC | Inserted blade face milling cutters for milling machine arbors according to DIN 6361 and DIN 6362, form EC |
| DIN 1830-3 PC | Inserted blade face milling cutters for milling machine arbors according to DIN 6361 and DIN 6362, form PC |
| DIN 1830-4 ED | Inserted blade face milling cutters for internal alignment for combined mounting on spindle-noses No. 50 and 60 according to DIN 2079, form ED |
| DIN 1830-4 PD | Inserted blade face milling cutters for internal alignment for combined mounting on spindle-noses No. 50 and 60 according to DIN 2079, form PD |
| DIN 1831-1 | Side and face milling cutters with inserted cutting blades |
| DIN 1833-1 A | Dovetail cutters with parallel shank, form A |
| DIN 1833-1 B | Dovetail cutters with parallel shank, form B |
| DIN 1833-1 C | Dovetail cutters with parallel shank, form C |
| DIN 1833-1 D | Dovetail cutters with parallel shank, form D |
| DIN 1833-1 E | Dovetail cutters with parallel shank, form E |
| DIN 1833-1 F | Dovetail cutters with parallel shank, form F |
| DIN 1833-1 G | Dovetail cutters with parallel shank, form G |
| DIN 1833-1 H | Dovetail cutters with parallel shank, form H |
| DIN 1834-1 A | Narrow side and face milling cutters, form A |
| DIN 1834-1 B | Narrow side and face milling cutters, form B |
| DIN 1837 | Metall slitting saws, fine pitch |
| DIN 1838 | Metall slitting saws, coarse pitch |
| DIN 1850-1 G | Bushes for plain bearings, form G |
| DIN 1850-1 U | Bushes for plain bearings, form U |
| DIN 1850-3 J | Slide bearings - Part 3: Bushes from sintered metal, form J - Cylinder bearing |
| DIN 1850-3 K | Slide bearings - Part 3: Bush from sintered metal, form K - Cup and ball bearing |
| DIN 1850-3 V | Slide bearings - Part 3: Bush from sintered metal, form V - Collar bearing |
| DIN 1850-4 M | Friction bearings - Part 4: Bushes from artificial coal, form M |
| DIN 1850-4 N | Friction bearings - Part 4: Bushes from artificial coal, form N |
| DIN 1850-5 P | Friction bearings - Part 5: Thermoset plastic bushes, form P |
| DIN 1850-5 R | Friction bearings - Part 5: Thermoset plastic bushes, form R |
| DIN 1850-6 S | Slide bearings - Part 6: Thermoplastic bushes, form S |
| DIN 1850-6 T | Slide bearings - Part 6: Thermoplastic bushes, form T |
| DIN 186 A | T-head bolts with square neck, form A |
| DIN 186 B | T-head bolts with square neck, form B |
| DIN 1861 | Twist drills for jig boring machines |
| DIN 1862 | Counterbores for jig boring machines |
| DIN 1863 | Countersinks 60°, form B |
| DIN 1864 | Core drills with Morse taper shank, long series, for the use in jig bushes |
| DIN 1866 | Countersinks 90 °, with parallel shank solid pilot |
| DIN 1867 | Countersinks 90°,with Morse taper shank and detachable pilot |
| DIN 1868 | Detachable pilots for counterbores and countersinks |
| DIN 1869 | Parallel shank twist drills, extra long series |
| DIN 1870 | Morse taper shank twist drills, extra long series |
| DIN 188 | T-head bolts with double nib |
| DIN 1880 | Shell end mills with tenon and parallel key drive |
| DIN 1889-1 AA | Die-sinking cutters with parallel shank, form AA |
| DIN 1889-1 AB | Die-sinking cutters with parallel shank, form AB |
| DIN 1889-1 AD | Cylindrical die-sinking cutters with parallel shank, form AD |
| DIN 1889-1 AE | Cylindrical die-sinking cutters with parallel shank, form AE |
| DIN 1889-1 BA | Cylindrical die-sinking cutters with parallel shank, form BA |
| DIN 1889-1 BB | Cylindrical die-sinking cutters with parallel shank, form BB |
| DIN 1889-1 BD | Cylindrical die-sinking cutters with parallel shank, form BD |
| DIN 1889-1 BE | Cylindrical die-sinking cutters with parallel shank, form BE |
| DIN 1889-2 C | Die-sinking cutters with Morse taper shank, form C |
| DIN 1889-2 D | Die-sinking cutters with Morse taper shank, form D |
| DIN 1889-3 EA | Tapered cylindrical die-sinking cutters with parallel shank, form EA |
| DIN 1889-3 EB | Tapered cylindrical die-sinking cutters with parallel shank, form EB |
| DIN 1889-3 ED | Tapered cylindrical die-sinking cutters with parallel shank, form ED |
| DIN 1889-3 EE | Tapered cylindrical die-sinking cutters with parallel shank, form EE |
| DIN 1889-3 FA | Tapered cylindrical die-sinking cutters with parallel shank, form FA |
| DIN 1889-3 FB | Tapered cylindrical die-sinking cutters with parallel shank, form FB |
| DIN 1889-3 FD | Tapered cylindrical die-sinking cutters with parallel shank, form FD |
| DIN 1889-3 FE | Tapered cylindrical die-sinking cutters with parallel shank, form FE |
| DIN 1890-1 | Slotting cutters with straight teeth |
| DIN 1891-1 A | Slotting cutters, interlocking and adjustable, form A |
| DIN 1891-1 B | Slotting cutters, interlocking and adjustable, form B |
| DIN 1892-1 | Interlocking two parts cylindrical cutters |
| DIN 1893-1 | Disc type thread milling cutters for ISO metric trapezoidal threads |
| DIN 1895 C | Machine reamers for Morse tapers, form C swirl fluted finish reamer with swerve to the left |
| DIN 1895 D | Machine reamers for Morse tapers, form D swirl fluted before reamer with swerve to the left |
| DIN 1895 E | Machine reamers for Morse tapers, form E straight fluted |
| DIN 1896 C | Machine reamers for metric tapers, form C swirl fluted finish reamer with swerve to the left |
| DIN 1896 D | Machine reamers for metric tapers, form D swirl fluted before reamer with swerve to the left |
| DIN 1896 E | Machine reamers for metric tapers, form E straight fluted |
| DIN 1897 | Parallel shank twist drills, stub series |
| DIN 1898-1 | Taper pin hole drills - Part 1: Pin hole drills with parallel shank |
| DIN 1898-2 | Taper pin hole drills - Part 2: Pin hole drills with Morse taper shank |
| DIN 1899 | Micro-precision drills |
DIN2X
| DIN 20018-1 | Textile-reinforced hoses - Part 1: Maximal working pressure PN 10/16 |
| DIN 20038 | Coupling nozzles |
| DIN 20039 A | Hose clips, form A |
| DIN 20039 B | Hose clamps, form B |
| DIN 20042 | Watervalves, nominal pressure 40 |
| DIN 20066 | Hose assemblies |
| DIN 20066 D | Hose fittings, form D |
| DIN 20066 E | Hose fittings, form E |
| DIN 20066 N | Hose fittings, form N |
| DIN 20066 N45 | Hose fittings, form N45 |
| DIN 20066 N90 | Hose fittings, form N90 |
| DIN 20066 P | Hose fittings, form P |
| DIN 20066 P45 | Hose fittings, form P45 |
| DIN 20066 P90 | Hose fittings, form P90 |
| DIN 20066 R | Hose fittings, form R |
| DIN 20066 R45 | Hose fittings, form R45 |
| DIN 20066 R90 | Hose fittings, form R90 |
| DIN 20066 S | Hose fittings, form S |
| DIN 20066 S45 | Hose fittings, form S45 |
| DIN 20066 S90 | Hose fittings, form S90 |
| DIN 20078-12 | Hose fittings 4-bolt split flange type, form S |
| DIN 204 A | Hand reamers for Morse tapers, form A straight fluted |
| DIN 204 B | Hand reamers for Morse tapers, form B swirl fluted with swerve to the left |
| DIN 205 A | Hand reamers for metric tapers, form A straight fluted |
| DIN 205 B | Hand reamers for metric tapers, form B swirl fluted with swerve to the left |
| DIN 20506 A | Clamping plates for securing rails onto steel supports, form A |
| DIN 20506 B | Clamping plates for securing rails onto steel supports, form B |
| DIN 206 A | Hand reamers, form A straight fluted |
| DIN 206 B | Hand reamers, form B swirl fluted with swerve to the left |
| DIN 2076 | Drawn round springs wires |
| DIN 2077 | Spring steel, round, hot-rolled |
| DIN 2079 A | Drive keys, form A |
| DIN 2079 B | Drive keys, form B |
| DIN 208 A | Machine reamers with Morse taper shank, form A straight fluted |
| DIN 208 B | Machine reamers with Morse taper shank, form B swirl fluted |
| DIN 208 C | Machine reamers with Morse taper shank, form C peeling |
| DIN 2082-1 | Nuts for milling machine arbors |
| DIN 2082-2 W | Nuts for hob arbors |
| DIN 2083-1 | Bearing collars for milling machine arbors for cutters with axial keyway |
| DIN 2083-2 A | Bearing sleeves for hob arbors; parallel type, form A |
| DIN 2083-2 B | Bearing sleeves for hob arbors; parallel type, form B |
| DIN 2084-1 A | Specing collars for milling machine arbors, form A |
| DIN 2084-1 B | Specing collars for milling machine arbors, form B |
| DIN 2084-1 C | Specing collars for milling machine arbors, form C |
| DIN 2084-2 D | Spacer collars for hob arbors, form D |
| DIN 2084-3 E | Spacer collars for hob arbors, form E |
| DIN 2085 | Sets of spacer collars for milling machine arbors with 7/24 taper |
| DIN 2086-2 A | Hob arbors with morse taper or metric taper shank for hobs with longitudinal keyway |
| DIN 2086-3 B | Hob arbors with morse taper or metric taper shank for hobs with clutch drive |
| DIN 209 A | Machine reamers with insert blades, Form A straight fluted reamer |
| DIN 209 B | Machine reamers with insert blades, Form B obliquely fluted reamer |
| DIN 2093 | Disc springs |
| DIN 2098-1 | Zylindrische Schraubenfedern aus runden Draehten, Baugroessen fuer kaltgeformte Druckfedern ab 0,5 mm Drahtdurchmesser |
| DIN 2098-2 | Zylindrische Schraubenfedern aus runden Draehten, Baugroessen fuer kaltgeformte Druckfedern unter 0,5 mm Drahtdurchmesser |
| DIN 212-1 A | Machine-reamers with parallel shank; continuous shank, form A straight fluted |
| DIN 212-1 B | Machine-reamers with parallel shank; continuous shank, form B swirl fluted |
| DIN 212-2 C | Machine-reamers with parallel shank; stepped shanks, form C straight fluted |
| DIN 212-2 D | Machine-reamers with parallel shank; stepped shanks, form D swirl fluted |
| DIN 212-2 E | Machine-reamers with parallel shank; stepped shanks, form E peeling |
| DIN 21346 | Square head bolts for shaft guides |
| DIN 21346 Mu | Square head bolts for shaft guides, with hexagon nut DIN 555 |
| DIN 2179 | Machine taper pin reamers with parallel shanks, swirl fluted with swerve to the left |
| DIN 2180 | Machine taper pin reamers with Morse taper shank, swirl fluted with swerve to the left |
| DIN 2181 | Screwing taps in sets, set of two for fine pitch metric ISO-threads from M1 to M52 |
| DIN 2185 | Reduction sleeves for tools with morse taper shanks |
| DIN 2187 | Extension sockets for tools with Morse taper shanks |
| DIN 219 A | Shell reamers, form A straight fluted reamer |
| DIN 219 B | Shell reamers, form B swirl fluted reamer |
| DIN 219 C | Shell reamers, form C Peeling reamer |
| DIN 220 A | Shell reamers with inserted blades, Form A straight fluted reamer |
| DIN 220 B | Shell reamers with inserted blades, form B grooved reamers |
| DIN 2211-1 SPA | Grooved pulleys for narrow V-belts SPA |
| DIN 2211-1 SPB | Grooved pulleys for narrow V-belts SPB |
| DIN 2211-1 SPC | Grooved pulleys for narrow V-belts SPC |
| DIN 2211-1 SPZ | Grooved pulleys for narrow V-belts SPZ |
| DIN 2215 | Classic V-belts |
| DIN 2216 | Finite V-belts |
| DIN 222 | Shell drills |
| DIN 2221 | Taper plug gauges for taper sleeve for drill chucks |
| DIN 2222 | Taper ring gauges for taper shafts for drill chucks |
| DIN 2231 | Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size |
| DIN 223-1 A | Circular screwing dies for ISO metric coarse thread M1 to M68, form A |
| DIN 223-1 B | Circular screwing dies for ISO metric coarse thread M1 to M68, form B |
| DIN 2231 R | Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size |
| DIN 2232 | Gap gauges "GO" with forged gauging member over 3 mm up to 100 mm nominal size |
| DIN 2233 | Gap gauges "NOT GO" with forged gauging member over 3 mm up to 100 mm nominal size |
| DIN 223-3 A | Circular screwing dies for fine pitch metric ISO-threads M1 to M68, form A |
| DIN 223-3 B | Circular screwing dies for fine pitch metric ISO-threads M1 to M68, form B |
| DIN 2240-1 R | Handles, form R |
| DIN 2240-1 S | Handles, form S |
| DIN 2240-2 | Handles, Head capbolts with hexagon socket |
| DIN 2240-2 GD | Handles, form GD |
| DIN 2240-2 GDK | Handles, form GDK |
| DIN 2240-2 GE | Handles, form GE |
| DIN 2240-2 GEK | Handles, form GEK |
| DIN 2240-2 K | Handles, clamping pieces K for pass dimension |
| DIN 2240-2 K-1 | Handles, clamping pieces K for pass dimension |
| DIN 2241 | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter |
| DIN 2241 | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter |
| DIN 2241 R | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter, form R |
| DIN 2241 S | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter, form S |
| DIN 22424 A | Triangle head bolts, form A |
| DIN 22424 B | Triangle head bolts, form B |
| DIN 22425 | Triangular nuts |
| DIN 2245-1 RV | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form RV" |
| DIN 2245-1 RZ | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form RZ" |
| DIN 2245-1 V | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form V" |
| DIN 2245-1 Z | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form Z" |
| DIN 2245-2 RZ | Limit plug gauges for holes up 40 mm up to 65 mm nominal diameter, form RZ |
| DIN 2246-1 RZ | "GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter |
| DIN 2246-1 SZ | "GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form SZ |
| DIN 2246-2 FG | "GO" plug gauges for holes over 120 mm up to 200 mm nominal diameter, form FG |
| DIN 2246-3 ZG | "GO" plug gauges for holes over 40 mm up to 120 mm nominal diameter, form ZG |
| DIN 2247-1 | "NOT GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter |
| DIN 2247-1 | "NOT GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form SZ |
| DIN 2247-3 ZA | "NOT GO" plug gauges with cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter, form ZA |
| DIN 2247-4 FA | "NOT GO" plug gauges, with segmental zylindrical gauging member over 120 mm up to 200 mm nominal diameter , form FA |
| DIN 2248-1 Z | """GO"" Gauging members, for holes from 1mm up to 40mm nominal diameter, form Z" |
| DIN 2248-2 ZG | "GO" gauging members for holes over 40 mm up to 120 mm nominal diameter, form ZG |
| DIN 2248-3 FG | "GO" gauging members for holes over 120 mm up to 200 mm nominal diameter, form FG |
| DIN 2249-1 V | """NOT GO"" gauging members, for holes above 5 mm up to 40 mm nominal diameter, form V" |
| DIN 2249-1 Z | """NOT GO"" gauging members, for holes from 1 mm up to 40 mm nominal diameter, form Z" |
| DIN 2249-2 S | "Spherical ""NOT GO"" gauging members, for holes over 40 mm up to 500 mm nominal diameter, form S" |
| DIN 2249-3 FA | "NOT GO" gauging members, segmental zylindrical plug members for holes over 120 mm up to 200 mm nominal diameter , form FA |
| DIN 2249-4 ZA | """NOT GO"" gauging members for holes over 40 mm up to 120 mm nominal diameter cylindrical plug gauges, form ZA" |
| DIN 225 | Die stock |
| DIN 2250-1 | GO ring gauges and setting ring gauges - Part 1: From 1 mm bis 315 mm nominal diameter |
| DIN 2253 | Reference gauges for gap gauges from 1 mm to 315 mm nominal size |
| DIN 2254-1 A | "NOT GO" ring gauges- Part 1: Nominal diameter from 1 mm to 315 mm |
| DIN 2269 | Cylindrical measuring pins |
| DIN 2269 | Thread pins |
| DIN 2275 | Feeler gauges |
| DIN 2275 | Feeler gauges |
| DIN 2280 R | """GO"" and ""NOT GO"" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form R" |
| DIN 2280 S | """GO"" and ""NOT GO"" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form S" |
| DIN 2281-1 R | "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form R |
| DIN 2281-1 S | "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form S |
| DIN 2282-1 | "GO" screw gauging members - Part 1: "GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter |
| DIN 2282-2 | "GO" screw gauging members - Part 2: "GO" workshop gauges, reference and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN 2283-1 R | "NOT GO" screw plug gauges - Part 1: "NOT GO" workshop gauges, rcheck and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form R |
| DIN 2283-1 S | "NOT GO" screw plug gauges - Part 1: "NOT GO" workshop gauges, rcheck and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form S |
| DIN 2283-2 | "NOT GO" screw plug gauges - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN 2284-1 | """NOT GO"" screw gauging members" |
| DIN 2284-2 | "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN 2285-1 | "GO" screw ring gauges for ISO metric screw thread - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpse |
| DIN 229-1 | Morse taper gauges; taper plug gauges |
| DIN 229-2 | Morse taper gauges; taper ring gauges |
| DIN 2299-1 A | "NOT GO" screw ring gauges for metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose |
| DIN 230-1 | Morse taper gauges; taper plug gauges for taper sockets with drift slot |
| DIN 230-2 | Morse taper gauges; taper ring gauges for taper shanks with drift tang |
| DIN 2328 | End mills with 7/24 taper shank |
| DIN 2328-1 | End mills with 7/24 taper shank |
| DIN 234-1 | Metric taper gauges; taper plug gauges |
| DIN 234-2 | Metic taper gauges; taper ring gauges |
| DIN 235-1 | Metric taper gauges; taper plug gauges for taper sockets with drift slot |
| DIN 235-2 | Metric taper gauges; taper ring gauges for taper shanks with drift tang |
| DIN 2353 A | Non-soldering compression fittings with cutting ring - complete fittings and survey, form A |
| DIN 2353 AA | Non-soldering compression fittings with cutting ring - complete fittings and survey, form AA |
| DIN 2353 AB | Non-soldering compression fittings with cutting ring - complete fittings and survey, form AB |
| DIN 2353 B | Non-soldering compression fittings with cutting ring - complete fittings and survey, form B |
| DIN 2353 BA | Non-soldering compression fittings with cutting ring - complete fittings and survey, form BA |
| DIN 2353 BB | Non-soldering compression fittings with cutting ring - complete fittings and survey, form BB |
| DIN 2353 C | Non-soldering compression fittings with cutting ring - complete fittings and survey, form C |
| DIN 2353 D | Non-soldering compression fittings with cutting ring - complete fittings and survey, form D |
| DIN 2353 F | Non-soldering compression fittings with cutting ring - complete fittings and survey, form F |
| DIN 2353 G | Non-soldering compression fittings with cutting ring - complete fittings and survey, form G |
| DIN 2353 H | Non-soldering compression fittings with cutting ring - complete fittings and survey, form H |
| DIN 2353 J | Non-soldering compression fittings with cutting ring - complete fittings and survey, form J |
| DIN 2353 M | Non-soldering compression fittings with cutting ring - complete fittings and survey, form M |
| DIN 2353 N | Non-soldering compression fittings with cutting ring - complete fittings and survey, form N |
| DIN 2353 O | Non-soldering compression fittings with cutting ring - complete fittings and survey, form O |
| DIN 2353 P | Non-soldering compression fittings with cutting ring - complete fittings and survey, form P |
| DIN 2391-1 | Welded precision steel pipes with special dimensional accuracy |
| DIN 2393-1 | Welded precision steel pipes with special dimensional accuracy |
| DIN 2394-1 | As-welded and sized precision steel tubes |
| DIN 2395-1 A | Rectangular and square welded precision steel tubes, form A |
| DIN 2395-1 B | Rectangular and square welded precision steel tubes, form B |
| DIN 2395-3 | Rectangular and square electric welded precision steel tubes |
| DIN 24041 Lg | Perforated plates, form Lg |
| DIN 24041 Lge | Perforated plates, form Lge |
| DIN 24041 Lv | Perforated plates, form Lv |
| DIN 24041 Qd | Perforated plates, form Qd |
| DIN 24041 Qg | Perforated plates, form Qg |
| DIN 24041 Qv | Perforated plates, form Qv |
| DIN 24041 Rd | Perforated plates, form Rd |
| DIN 24041 Rg | Perforated plates, form Rg |
| DIN 24041 Rv | Perforated plates, form Rv |
| DIN 24041 SKv | Perforated plates, form SKv |
| DIN 2413 | Seamless steel tubes for oil- and water-hydraulic systems |
| DIN 24338 | Spherical plain bearing rod ends |
| DIN 2440 | Steel tubes, medium-weight suitable for screwing |
| DIN 2441 | Steel tubes, heavy-weight suitable for screwing |
| DIN 2442 | Tubes with quality specification |
| DIN 2448 | Plain end seamless steel tubes |
| DIN 24531-1 P | Gratings used as stairs - Part 1: Metal gratings, form P |
| DIN 24531-1 SP | Gratings used as stairs - Part 1: Metal gratings, form SP |
| DIN 24531-2 | Gratings used as stairtreads - Part 2: Sheet metal gratings |
| DIN 24534 3 | Chain locks, chain hooks |
| DIN 24537-1 P | Gratings used as floor coverings - Part 1: Metal gratings, form P |
| DIN 24537-1 SP | Gratings used as floor coverings - Part 1: Metal gratings, form SP |
| DIN 24555 | Ball joints with narrow universal joint bearings |
| DIN 24556 A | Fluidpower; clavis bracket with pivot pin and locking plate |
| DIN 24556 B | Fluidpower; clavis bracket with pivot pin and locking plate |
| DIN 24556 L | Fluidpower; clavis bracket with pivot pin and locking plate |
| DIN 2458 | Plain end welded steel tubes |
| DIN 2462-1 | Seamless tubes, stainless steels, ferritic, austenitic |
| DIN 2462-1 | Seamless tubes, stainless steels |
| DIN 2463-1 | Welded austenitic stainless steel tubes |
| DIN 25074 1 | Hinges |
| DIN 25074 2 | Sleeves |
| DIN 25074 3 | Bolt |
| DIN 25074 A | Door hinges, complete |
| DIN 2509 K | Double end studs, form K |
| DIN 2509 L | Double end studs, form L |
| DIN 2510-3 K | Bolted fastening with waisted shank; Stud-bolts, form K |
| DIN 2510-3 KO | Bolted fastening with waisted shank; Stud-bolts, form KO |
| DIN 2510-3 KU | Bolted fastening with waisted shank; Stud-bolts, form KU |
| DIN 2510-3 KUO | Bolted fastening with waisted shank; Stud-bolts, form KUO |
| DIN 2510-3 L | Bolted fastening with waisted shank; Stud-bolts, form L |
| DIN 2510-3 Z | Bolted fastening with waisted shank; Stud-bolts, form Z |
| DIN 2510-3 ZO | Bolted fastening with waisted shank; Stud-bolts, form ZO |
| DIN 2510-3 ZU | Bolted fastening with waisted shank; Stud-bolts, form ZU |
| DIN 2510-3 ZUO | Bolted fastening with waisted shank; Stud-bolts, form ZUO |
| DIN 2510-4 GP | Bolted connections with reduced shank, studs, form GP |
| DIN 2510-4 GPO | Bolted connections with reduced shank, studs, form GPO |
| DIN 2510-4 GQ | Bolted connections with reduced shank, studs, form GQ |
| DIN 2510-4 GQO | Bolted connections with reduced shank, studs, form GQO |
| DIN 2510-4 GR | Bolted connections with reduced shank, studs, form GR |
| DIN 2510-4 GRO | Bolted connections with reduced shank, studs, form GRO |
| DIN 2510-4 GS | Bolted connections with reduced shank, studs, form GS |
| DIN 2510-4 GSO | Bolted connections with reduced shank, studs, form GSO |
| DIN 2510-4 HP | Bolted connections with reduced shank, studs, form HP |
| DIN 2510-4 HPO | Bolted connections with reduced shank, studs, form HPO |
| DIN 2510-4 HQ | Bolted connections with reduced shank, studs, form HQ |
| DIN 2510-4 HQO | Bolted connections with reduced shank, studs, form HQO |
| DIN 2510-4 HR | Bolted connections with reduced shank, studs, form HR |
| DIN 2510-4 HRO | Bolted connections with reduced shank, studs, form HRO |
| DIN 2510-4 HS | Bolted connections with reduced shank, studs, form HS |
| DIN 2510-4 HSO | Bolted connections with reduced shank, studs, form HSO |
| DIN 2510-5 NF | Bolted connections with reduced shank; hexagon nuts |
| DIN 2510-5 TF | Bolted connections with reduced shank; hexagon nuts |
| DIN 25106 A | Rosettes, form A |
| DIN 2510-6 AF | Bolted connections with reduced shank; cap nuts |
| DIN 2510-6 AFO | Bolted connections with reduced shank; cap nuts |
| DIN 25106 B | Rosettes, form B |
| DIN 2510-6 BF | Bolted connections with reduced shank; cap nuts |
| DIN 2510-6 BFO | Bolted connections with reduced shank; cap nuts |
| DIN 2510-7 D | Bolted connections with reduced shank; extension sleeves |
| DIN 2510-7 E | Bolted connections with reduced shank; extension sleeves |
| DIN 25109-2 10 | Axle journals |
| DIN 25109-2 11 | Slotted nuts |
| DIN 25109-2 13 | Retaining elements |
| DIN 25109-2 14 | Retaining elements |
| DIN 25109-2 15 | Retaining elements |
| DIN 25109-2 16 | Retaining elements |
| DIN 25109-2 21 | Cap |
| DIN 25109-2 25 | Cap |
| DIN 25109-2 28 | Gasket |
| DIN 25109-2 3 | Housings |
| DIN 25109-2 4 | Labyrinth rings |
| DIN 25109-2 5 | Gaskets |
| DIN 25109-2 6 | Spacer washers |
| DIN 25109-2 7 | Axle journals |
| DIN 25109-2 8 | Axle journals |
| DIN 25109-2 9 | Axle journals |
| DIN 25192 | T-head bolts, for railway vehicles |
| DIN 25193 | Mushroom head anchor screws |
| DIN 25195 | Countersunk bolts with double nip |
| DIN 2527 E ND 100 | Blind flanges nominal pressure 100 |
| DIN 2527 E ND 64 | Blind flanges nominal pressure 64 |
| DIN 2527 ND 10 | Blind flanges nominal pressure 10 |
| DIN 2527 ND 16 | Blind flanges nominal pressure 16 |
| DIN 2527 ND 25 | Blind flanges nominal pressure25 |
| DIN 2527 ND 40 | Blind flanges nominal pressure 40 |
| DIN 2527 ND 6 | Blind flanges nominal pressure 6 |
| DIN 2558 A | Oval thread flanges, slick - nominal pressure 6, form A |
| DIN 2558 B | Oval thread flanges, slick - nominal pressure 6, form B |
| DIN 2561 C | Oval thread flanges with rudiment nominal pressure 10 and 16 |
| DIN 2566 C | Screwing flanges with rudiment - Nominal pressure 10 - 18 |
| DIN 2573 A | Flanges, clogged for soldering or welding nominal pressure 6, form A |
| DIN 2573 AS | Flanges, clogged for soldering or welding nominal pressure 6, form AS |
| DIN 2573 B | Flanges, clogged for soldering or welding nominal pressure 6, form B |
| DIN 2573 BS | Flanges, clogged for soldering or welding nominal pressure 6, form BS |
| DIN 2576 A | Flanges, clogged for soldering or welding nominal pressure 10, form A |
| DIN 2576 AS | Flanges, clogged for soldering or welding nominal pressure 10, form AS |
| DIN 2576 B | Flanges, clogged for soldering or welding nominal pressure 10, form B |
| DIN 2576 BS | Flanges, clogged for soldering or welding nominal pressure 10, form BS |
| DIN 258 | Taper pins with threaded pin |
| DIN 26020 1 | Toggle nuts |
| DIN 26020 5 | Gaskets |
| DIN 26020 6 | Eye bolts |
| DIN 26020 7 | Dome cup |
| DIN 26020 B | Dome, form B |
| DIN 26029-2 B | Vent holes and drain plugs, form B |
| DIN 2605-1 Series 1 | Elbow pipes, reduce efficiency, Series 1 |
| DIN 2605-1 Series 2 | Elbow pipes, reduce efficiency, Series 2 |
| DIN 2605-1 Series 3 | Elbow pipes, reduce efficiency, Series 3 |
| DIN 2605-1 Series 4 | Elbow pipes, reduce efficiency, Series 4 |
| DIN 2605-1 Series 5 | Elbow pipe, reduce efficiency, Series 5 |
| DIN 2605-2 Series 1 | Fittings for welding - elbows - Part 2: Row 1 |
| DIN 2605-2 Series 2 | Fittings for welding - elbows - Part 2: Row 2 |
| DIN 2605-2 Series 3 | Fittings for welding - elbows - Part 2: Row 3 |
| DIN 2605-2 Series 4 | Fittings for welding - elbows - Part 2: Row 4 |
| DIN 2605-2 Series 5 | Fittings for welding - elbows - Part 2: Row 5 |
| DIN 2607 | Tube bends - For butt-welding of copper |
| DIN 261 | T-head bolt |
| DIN 2615-1 WDR 1 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 2 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 3 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 4 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 5 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR1 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR2 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR3 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR4 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR5 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2616-1 WDR1 | Reducers |
| DIN 2616-1 WDR2 | Reducers |
| DIN 2616-1 WDR3 | Reducers |
| DIN 2616-1 WDR4 | Reducers |
| DIN 2616-1 WDR5 | Reducers |
| DIN 2616-2 E WDR 1 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 1 |
| DIN 2616-2 E WDR 2 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 2 |
| DIN 2616-2 E WDR 3 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 3 |
| DIN 2616-2 E WDR 4 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 4 |
| DIN 2616-2 E WDR 5 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 5 |
| DIN 2616-2 K WDR 1 | Reducing sockets, full utilization factor, concentric, row of wall thickness 1 |
| DIN 2616-2 K WDR 2 | Reducing sockets, full utilization factor, concentric, row of wall thickness 2 |
| DIN 2616-2 K WDR 3 | Reducing sockets, full utilization factor, concentric, row of wall thickness 3 |
| DIN 2616-2 K WDR 4 | Reducing sockets, full utilization factor, concentric, row of wall thickness 4 |
| DIN 2616-2 K WDR 5 | Reducing sockets, full utilization factor, concentric, row of wall thickness 5 |
| DIN 2617 | Shapes to shrink-wrap, caps |
| DIN 2618 | Butt weldings fittings, welding saddles, nominal pressure 16 |
| DIN 2627 | Pre welded flanges, nominal pressure 400 |
| DIN 2628 | Pre welded flanges, nominal pressure 250 |
| DIN 2629 | Pre welded flanges, nominal pressure 320 |
| DIN 2630 | Pre welded flanges, nominal pressure 1 and 2,5 |
| DIN 2631 | Pre welded flanges, nominal pressure 6 |
| DIN 2632 | Pre welded flanges, nominal pressure 10 |
| DIN 2633 | Pre welded flanges, nominal pressure 16 |
| DIN 2634 | Pre welded flanges, nominal pressure 25 |
| DIN 2635 | Pre welded flanges, nominal pressure 40 |
| DIN 2636 | Pre welded flanges, nominal pressure 64 |
| DIN 2637 | Pre welded flanges, nominal pressure 100 |
| DIN 2638 | Pre welded flanges, nominal pressure 160 |
| DIN 2641 F | Lapped flanges - nominal pressure 6, form F |
| DIN 2642 F | Lapped flanges - nominal pressure 10, form F |
| DIN 26512 | Shields hook |
| DIN 2673 | Loose flanges nominal pressure 10 |
| DIN 268 | Tangential keys and tangential keyways for alternating shock loads |
| DIN 2690 ND 1 | Sealing for flanges with plain contact surfaces - nominal pressure 1 |
| DIN 2690 ND 10 | Sealing for flanges with plain contact surfaces - nominal pressure 10 |
| DIN 2690 ND 16 | Sealing for flanges with plain contact surfaces - nominal pressure 16 |
| DIN 2690 ND 2.5 | Sealing for flanges with plain contact surfaces - nominal pressure 2.5 |
| DIN 2690 ND 25 | Sealing for flanges with plain contact surfaces - nominal pressure 25 |
| DIN 2690 ND 40 | Sealing for flanges with plain contact surfaces - nominal pressure 40 |
| DIN 2690 ND 6 | Sealing for flanges with plain contact surfaces - nominal pressure 6 |
| DIN 2691 | Sealing for flanges - nominal pressure 10 - 160 |
| DIN 2692 | Sealing for flanges with recess - nominal pressure 10 - 100 |
| DIN 2696 PN 100 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 100) |
| DIN 2696 PN 100 series 2 | Lens shaped gaskets series 2 for flanges DIN 2637: 1975-03 - series 2 (PN 100) |
| DIN 2696 PN 160 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 160) |
| DIN 2696 PN 160 series 2 | Lens shaped gaskets series 2 for flanges DIN 2638 - series 2 (PN 160) |
| DIN 2696 PN 250 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 250) |
| DIN 2696 PN 250 series 2 | Lens shaped gaskets series 2 for flanges DIN 2628 - series 2 (PN 250) |
| DIN 2696 PN 320 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 320) |
| DIN 2696 PN 320 series 2 | Lens shaped gaskets series 2 for flanges DIN 2629 - series 2 (PN 320) |
| DIN 2696 PN 400 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 400) |
| DIN 2696 PN 63 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 63) |
| DIN 2696 PN 64 series 2 | Lens shaped gaskets series 2 for flanges DIN 2636: 1975-03 - series 2 (PN 64) |
| DIN 271 | Tangential keys for constant loads |
| DIN 28011 | Torispherical heads |
| DIN 28013 | Ellipsoidal heads |
| DIN 28031 A | Weld flanges for unpressurized vessels and process apparatus of non-alloy and stainless steel, form A |
| DIN 28031 B | Weld flanges for unpressurized vessels and process apparatus of non-alloy and stainless steel, form B |
| DIN 28034 | Profile |
| DIN 28034 A | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form A |
| DIN 28034 C | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form C |
| DIN 28034 D | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form D |
| DIN 28034 E | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form E |
| DIN 28034 F | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form F |
| DIN 28040 FB | Sealing for vessels and process apparatus, form FB |
| DIN 28040 FS | Sealing for vessels and process apparatus, form FS |
| DIN 28080 | Saddle supports for horizontal apparatus, sliding |
| DIN 28080 AV | Saddle supports for horizontal apparatus, form AV |
| DIN 28080 BV | Saddle supports for horizontal apparatus, form BV |
| DIN 28080 CV | Saddle supports for horizontal apparatus, form CV |
| DIN 28080 D | Saddle supports for horizontal apparatus, form D |
| DIN 28081-1 F | Tubular supports for vessels, form F |
| DIN 28081-1 S | Tubular supports for vessels, form S |
| DIN 28081-2 KM | Steel profile supports for vessels, form KM |
| DIN 28081-2 MM | Steel profile supports for vessels, form MM |
| DIN 28081-3 B | Tubular supports for vessels, form B |
| DIN 28082-1 A | Skirts for apparatus, Part 1: With simple bottom ring, form A |
| DIN 28082-1 B | Skirts for apparatus, Part 1: With simple bottom ring, form B |
| DIN 28082-2 D | Skirts for apparatus, form D |
| DIN 28082-2 P | Skirts for apparatus, form P |
| DIN 28083-1 A | Bracket supports, form A |
| DIN 28083-1 B | Bracket supports, form B |
| DIN 28084 AEF | Support rings and ring supports on apparatus, form AEF |
| DIN 28084 AEU | Support rings and ring supports on apparatus, form AEU |
| DIN 28084 AEZ | Support rings and ring supports on apparatus, form AEZ |
| DIN 28084 BEF | Support rings and ring supports on apparatus, form BEF |
| DIN 28084 BEU | Support rings and ring supports on apparatus, form BEU |
| DIN 28084 BEZ | Support rings and ring supports on apparatus, form BEZ |
| DIN 28084 BHF | Support rings and ring supports on apparatus, form BHF |
| DIN 28084 CEF | Support rings and ring supports on apparatus, form CEF |
| DIN 28084 CEU | Support rings and ring supports on apparatus, form CEU |
| DIN 28084 CEZ | Support rings and ring supports on apparatus, form CEZ |
| DIN 28084 CHF | Support rings and ring supports on apparatus, form CHF |
| DIN 28084 CHU | Support rings and ring supports on apparatus, form CHU |
| DIN 28084 CHZ | Support rings and ring supports on apparatus, form CHZ |
| DIN 28084 DEF | Support rings and ring supports on apparatus, form DEF |
| DIN 28084 DEU | Support rings and ring supports on apparatus, form DEU |
| DIN 28084 DEZ | Support rings and ring supports on apparatus, form DEZ |
| DIN 28084 DHF | Support rings and ring supports on apparatus, form DHF |
| DIN 28084 DHU | Support rings and ring supports on apparatus, form DHU |
| DIN 28084 DHZ | Support rings and ring supports on apparatus, form DHZ |
| DIN 28085 A | Lifting lugs on apparatuses for mounting, form A |
| DIN 28085 B | Lifting lugs on apparatuses for mounting, form B |
| DIN 28086 | Eyelets on apparatuses for mounting |
| DIN 28086 A | Eyelets for mounting vessels and apparatuses, form A |
| DIN 28086 B | Eyelets for mounting vessels and apparatuses, form B |
| DIN 28087 | Top head type lifting lugs on apparatuses |
| DIN 28117 A | Block flanges for vessels and process apparatus, without welding lug |
| DIN 28117 B | Block flanges for vessels and process apparatus, with welding lug |
| DIN 28117 C | Block flanges for vessels and process apparatus, with height adjustment |
| DIN 28117 D | Block flanges for vessels and process apparatus, with coat form |
| DIN 28120 A | Flanged holders for circular sight glasses without cover, form A |
| DIN 28120 B | Flanged holders for circular sight glasses with cover, form B |
| DIN 28121 AB1 | Circular sight glass fitting with round sight glass plate in force shunt, type A, forms of the flange sealing surface according to DIN EN 1092-1, form B (sealing face) |
| DIN 28121 AC | Circular sight glass fitting with round sight glass plate in force shunt, type A, forms of the flange sealing surface according to DIN EN 1092-1, form C (spring) |
| DIN 28121 AE | Circular sight glass fitting with round sight glass plate in force shunt, type A, forms of the flange sealing surface according to DIN EN 1092-1, form E (ledge) |
| DIN 28121 BB | Circular sight glass fitting with round sight glass plate in force shunt, type B, forms of the flange sealing surface according to DIN EN 1092-1, form B (sealing face) |
| DIN 28121 BE | Circular sight glass fitting with round sight glass plate in force shunt, type B, forms of the flange sealing surface according to DIN EN 1092-1, form E (ledge) |
| DIN 28121 EB | Circular sight glass fitting with round sight glass plate in force shunt, type E, forms of the flange sealing surface according to DIN EN 1092-1, form B (sealing face) |
| DIN 28122 C | Blank flanges with plane gasket |
| DIN 28122 F | Blank flanges with spring |
| DIN 28122 V | Blank flanges with nose |
| DIN 28124-1 DA | Manhole closures - Part 1: for pressure vessels, form DA lids sealing surface, smooth |
| DIN 28124-1 DB | Manhole closures - Part 1: for pressure vessels, form DB lids sealing surface, smooth |
| DIN 28124-1 DG | Manhole closures - Part 1: for pressure vessels, form DG lids sealing surface, smooth |
| DIN 28124-1 MA | Manhole closures - Part 1: for non-pressurized containers, closures form MA sealing surface, smooth |
| DIN 28124-1 MB | Manhole closures - Part 1: for non-pressurized containers, closures form MB sealing surface, smooth |
| DIN 28124-1 MG | Manhole closures - Part 1: for non-pressurized containers, closures form MG sealing surface, smooth |
| DIN 28124-1 SA | Manhole closures - Part 1: for pressure vessels, form SA piece sealing surface, smooth |
| DIN 28124-1 SB | Manhole closures - Part 1: for pressure vessels, form SB piece sealing surface, smooth |
| DIN 28124-1 SG | Manhole closures - Part 1: for pressure vessels, form SG piece sealing surface, smooth |
| DIN 28124-2 DC | Manhole closures - Part 2: for pressure vessels, form steel, form DC lids sealing surface, smooth |
| DIN 28124-2 DD | Manhole closures - Part 2: for pressure vessels, form steel, form DD lids sealing surface smooth with surface protection |
| DIN 28124-2 DE | Manhole closures - Part 2: for pressure vessels, form steel, form DE lids spring |
| DIN 28124-2 DF | Manhole closures - Part 2: for pressure vessels, form steel, form DF lids forward |
| DIN 28124-2 MC | Manhole closures - Part 2: for pressure vessels, form steel, form MC closures sealing surface, smooth |
| DIN 28124-2 MD | Manhole closures - Part 2: for pressure vessels, form steel, form MD closures sealing surface smooth with surface protection |
| DIN 28124-2 ME | Manhole closures - Part 2: for pressure vessels, form steel, form ME closures spring and groove |
| DIN 28124-2 MF | Manhole closures - Part 2: for pressure vessels, form steel, form MF closures forward and return |
| DIN 28124-2 SC | Manhole closures - Part 2: for pressure vessels, form steel, form SC connectors sealing surface, smooth |
| DIN 28124-2 SD | Manhole closures - Part 2: for pressure vessels, form steel, form SD connectors sealing surface smooth with surface protection |
| DIN 28124-2 SE | Manhole closures - Part 2: for pressure vessels, form steel, form SE connectors groove |
| DIN 28124-2 SF | Manhole closures - Part 2: for pressure vessels, form steel, form SF connectors return |
| DIN 28124-3 DH | Manhole closures - Part 3: pressure vessel disguised, form DH lids sealing surface, smooth |
| DIN 28124-3 DJ | Manhole closures - Part 3: pressure vessel disguised, form DJ lids sealing surface, spring |
| DIN 28124-3 DK | Manhole closures - Part 3: pressure vessel disguised, form DK lids sealing surface projection |
| DIN 28124-3 MH | Manhole closures - Part 3: pressure vessel disguised, form MH closures sealing surface, smooth |
| DIN 28124-3 MJ | Manhole closures - Part 3: pressure vessel disguised, form MJ closures sealing face, tongue and groove |
| DIN 28124-3 MK | Manhole closures - Part 3: pressure vessel disguised, form MK closures sealing surface, forward and return |
| DIN 28124-3 SH | Manhole closures - Part 3: pressure vessel disguised, form SH connectors sealing surface, smooth |
| DIN 28124-3 SJ | Manhole closures - Part 3: pressure vessel disguised, form SJ pipe sealing surface groove |
| DIN 28124-3 SK | Manhole closures - Part 3: pressure vessel disguised, form SK pipe sealing surface, return |
| DIN 28124-4 H | Manhole closures - Part 4: Swivel devices, form H horizontal arrangement |
| DIN 28124-4 V | Manhole closures - Part 4: Swivel devices, form V vertical arrangement |
| DIN 28125-1 VEC | Hinged closures, round - Part 1: Nominal diameter DN 150 to DN 800, form VEC |
| DIN 28125-1 VEN | Hinged closures, round - Part 1: Nominal diameter DN 150 to DN 800, form VEN |
| DIN 28125-1 VGC | Hinged closures, round - Part 1: Nominal diameter DN 500 to DN 800, form VGC |
| DIN 28125-1 VGN | Hinged closures, round - Part 1: Nominal diameter DN 500 to DN 800, form VGN |
| DIN 28126 A | DN 125 bow closures, form A, unalloyed steel |
| DIN 28126 B | DN 125 bow closures, form B, rustless steel |
| DIN 28126 C | DN 125 bow closures, form C, unalloyed steel for surface protection |
| DIN 28129 | Clamp nuts for covers |
| DIN 2814 1 | Inverted nuts |
| DIN 2814 2 | Valve tapers |
| DIN 2814 3 | Tappet |
| DIN 2814 6 | Gasket rings |
| DIN 2814 A | Valves, form A |
| DIN 2814 B | Valves, form B |
| DIN 2814 C | Valves, form C |
| DIN 2814 D | Breather screws, form D |
| DIN 2814 E | Screws, form E |
| DIN 2814 S | Valve units |
| DIN 2848 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, blind flanges |
| DIN 2848 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flange pipe |
| DIN 2848 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, measuring socket |
| DIN 2848 A | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form A |
| DIN 2848 B | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form B |
| DIN 2848 C | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form C |
| DIN 2848 D | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form D |
| DIN 2848 E | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flange reducers, form E |
| DIN 2848 E2 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (eccentric), form E2 |
| DIN 2848 E3 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (eccentric), form E3 |
| DIN 2848 F | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, spacers, form F |
| DIN 2848 G | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, spacers, form G |
| DIN 2848 H | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, spacers, form H |
| DIN 2848 K | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flange reducers, form K |
| DIN 2848 K1 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (concentric), form K1 |
| DIN 2848 K2 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (concentric), form K2 |
| DIN 2848 K3 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (concentric), form K3 |
| DIN 2848 T | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flanged tees, form T |
| DIN 2856-11 4090g | Capillary soldering fittings, solder angle with internal thread |
| DIN 2856-11 4092g | Capillary soldering fittings, solder angle with male thread |
| DIN 2856-11 4130g | Capillary soldering fittings, tees with internal threaded outlet |
| DIN 2856-11 4472g | Capillary soldering fittings, ceiling bracket with two hole flange |
| DIN 2856-11 5001 A | Capillary soldering fittings, elbows 90° |
| DIN 2856-11 5002 A | Capillary soldering fittings, elbows 90° |
| DIN 2856-11 5040 | Capillary soldering fittings, elbows 45° |
| DIN 2856-11 5041 | Capillary soldering fittings, elbows 45° |
| DIN 2856-11 5130 | Capillary soldering fittings, tees |
| DIN 2856-11 5130 | Capillary soldering fittings, tees |
| DIN 2856-11 5240 | Capillary soldering fittings, reducing sleeves |
| DIN 2856-11 5243 | Capillary soldering fittings, reducing nipples |
| DIN 2856-11 5270 | Capillary soldering fittings, sleeves |
| DIN 2982 | Double nipples heavy |
| DIN 2982 | Pipe nipples |
| DIN 2988 | Sockets, reduced |
DIN 3X
| DIN 3015-1 A | Fastening clamps, Block clamps - Part 1: Light duty (L), form A |
| DIN 3015-1 B | Fastening clamps, Block clamps - Part 1: Light duty (L), form B |
| DIN 3015-1 C | Fastening clamps, Block clamps - Part 1: Light duty (L), form C |
| DIN 3015-1 D | Fastening clamps, Block clamps - Part 1: Light duty (L), form D |
| DIN 3015-1 E | Fastening clamps, Block clamps - Part 1: Light duty (L), form E |
| DIN 3015-1 F | Fastening clamps, Block clamps - Part 1: Light duty (L), form F |
| DIN 3015-1 G | Fastening clamps, Block clamps - Part 1: Light duty (L), form G |
| DIN 3015-1 H | Fastening clamps, Block clamps - Part 1: Light duty (L), form H |
| DIN 3015-1 LAP | Temporary welding plates |
| DIN 3015-1 LAS | Annex screws |
| DIN 3015-1 LDP | Cover plates |
| DIN 3015-1 LEL | Elastomer inserts |
| DIN 3015-1 LKP | Clamp half pairs |
| DIN 3015-1 LTM | Mounting rail nuts |
| DIN 3015-1 LTS | Bearing rail |
| DIN 3015-1 LVS | Locking pistons |
| DIN 3015-2 1 | Clamp halfs |
| DIN 3015-2 A | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form A |
| DIN 3015-2 B | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form B |
| DIN 3015-2 D | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form D |
| DIN 3015-2 E | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form E |
| DIN 3015-2 G | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form G |
| DIN 3015-2 H | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form H |
| DIN 3015-2 S | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form S |
| DIN 3015-2 SAP | Temporary welding plates |
| DIN 3015-2 SAS | Annex screws |
| DIN 3015-2 SDP | Cover plates |
| DIN 3015-2 SEL | Elastomer inserts |
| DIN 3015-2 SKP | Clamp half pairs |
| DIN 3015-2 STM | Mounting rail nuts |
| DIN 3015-2 STS | Bearing rail |
| DIN 3015-2 SVS | Locking pistons |
| DIN 3015-3 1 | Clamp halfs |
| DIN 3015-3 A | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form A |
| DIN 3015-3 AP | Temporary welding plates |
| DIN 3015-3 AS | Annex screws |
| DIN 3015-3 D | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form D |
| DIN 3015-3 DP | Cover plates |
| DIN 3015-3 G | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form G |
| DIN 3015-3 H | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form H |
| DIN 3015-3 KP | Clamp half pairs |
| DIN 3015-3 TM | Mounting rail nuts |
| DIN 3015-3 VS | Locking pistons |
| DIN 3016-1 A1 | Fastening clamps - Part 1: With tongue, form A1 |
| DIN 3016-1 A2 | Fastening clamps - Part 1: With tongue, form A2 |
| DIN 3016-1 B1 | Fastening clamps - Part 1: With tongue, form B1 |
| DIN 3016-1 B2 | Fastening clamps - Part 1: With tongue, form B2 |
| DIN 3016-1 C1 | Fastening clamps - Part 1: With tongue, form C1 |
| DIN 3016-1 C2 | Fastening clamps - Part 1: With tongue, form C2 |
| DIN 3016-1 D1 | Fastening clamps - Part 1: With tongue, form D1 |
| DIN 3016-1 D2 | Fastening clamps - Part 1: With tongue, form D2 |
| DIN 3016-1 E1 | Fastening clamps - Part 1: With tongue, form E1 |
| DIN 3016-1 E2 | Fastening clamps - Part 1: With tongue, form E2 |
| DIN 3016-1 F1 | Fastening clamps - Part 1: With tongue, form F1 |
| DIN 3016-1 F2 | Fastening clamps - Part 1: With tongue, form F2 |
| DIN 3016-1 G1 | Fastening clamps - Part 1: With tongue, form G1 |
| DIN 3016-1 G2 | Fastening clamps - Part 1: With tongue, form G2 |
| DIN 3016-1 H1 | Fastening clamps - Part 1: With tongue, form H1 |
| DIN 3016-1 H2 | Fastening clamps - Part 1: With tongue, form H2 |
| DIN 3016-1 I1 | Fastening clamps - Part 1: With tongue, form I1 |
| DIN 3016-1 I2 | Fastening clamps - Part 1: With tongue, form I2 |
| DIN 3016-1 J1 | Fastening clamps - Part 1: With tongue, form J1 |
| DIN 3016-1 J2 | Fastening clamps - Part 1: With tongue, form J2 |
| DIN 3016-2 G1 | Fastening clamps - Part 2: With fastening lugs, form G1 |
| DIN 3016-2 G2 | Fastening clamps - Part 2: With fastening lugs, form G2 |
| DIN 3016-2 H1 | Fastening clamps - Part 2: With fastening lugs, form H1 |
| DIN 3016-2 H2 | Fastening clamps - Part 2: With fastening lugs, form H2 |
| DIN 3016-3 J1 | Fastening clamps - Part 3: Section clamps and flange dimensions, form J1 |
| DIN 3016-3 J2 | Fastening clamps - Part 3: Section clamps and flange dimensions, form J2 |
| DIN 3016-3 J3 | Fastening clamps - Part 3: Section clamps and flange dimensions, form J3 |
| DIN 3016-3 K1 | Fastening clamps - Part 3: Section clamps and flange dimensions, form K1 |
| DIN 3016-3 K2 | Fastening clamps - Part 3: Section clamps and flange dimensions, form K2 |
| DIN 3016-3 K3 | Fastening clamps - Part 3: Section clamps and flange dimensions, form K3 |
| DIN 3016-3 M1 | Fastening clamps - Part 3: Section clamps and flange dimensions, form M1 |
| DIN 3016-3 M2 | Fastening clamps - Part 3: Section clamps and flange dimensions, form M2 |
| DIN 3017-1 A | Hose clamps with worm gear drive; form A |
| DIN 3017-1 B | Hose clamps with worm gear drive; form B |
| DIN 3017-2 B1 | Hose clamps - Part 2: Clamps with fastening lugs; form B1 |
| DIN 3017-2 B2 | Hose clamps - Part 2: Clamps with fastening lugs; form B2 |
| DIN 3017-3 C1 | Hose clamps - Part 3: Bolt clamps; form C1 |
| DIN 3017-3 C2 | Hose clamps - Part 3: Bolt clamps; form C2 |
| DIN 3017-5 D1 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form D1 |
| DIN 3017-5 D2 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form D2 |
| DIN 3017-5 E1 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form E1 |
| DIN 3017-5 E2 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form E2 |
| DIN 3018 A | Oiler indicators, form A |
| DIN 3018 B | Oil level indicators, form B |
| DIN 3018 C | Oil level indicators, form C |
| DIN 3018 D | Oil level indicators, form D |
| DIN 3018 E | Oil level indicators, form E |
| DIN 302 | Countersunk head rivets, nominal diameters 10 to 36 mm, form A/B |
| DIN 3021-1 A | Spring band clamps, form A |
| DIN 3021-1 B | Spring band clamps, form B |
| DIN 3021-3 A | Spring band clamps, spigot, form A |
| DIN 3021-3 B | Spring band clamps, spigot, form B |
| DIN 3021-3 C | Spring band clamps, spigot, form C |
| DIN 3021-3 D | Spring band clamps, spigot, form D |
| DIN 30386 | Hexagon nuts, rounded acme thread |
| DIN 30387 | Shouldered nuts, metrical fine thread |
| DIN 30389 A | Hexagon nuts and crown nuts with round thread, form A (right thread) |
| DIN 30389 B | Hexagon nuts and crown nuts with round thread, form B (left thread) |
| DIN 30389 C | Hexagon nuts and crown nuts with round thread, form C (right thread) |
| DIN 30389 D | Hexagon nuts and crown nuts with round thread, form D (left thread) |
| DIN 30389 E | Hexagon nuts and crown nuts with round thread |
| DIN 3052 | Spiral wires 1x7 |
| DIN 3055 FE | Round flexible wires 6x7 with fibre inserts (FE) |
| DIN 3055 SE | Round flexible wires 6x7 with steel inserts (SE) |
| DIN 3060 FE | Round flexible wires 6x19 with fibre inserts (FE) |
| DIN 3060 SE | Round flexible wires 6x19 with steel inserts (SE) |
| DIN 3064 FE | Round flexible wires 6x36 Warrington-Seale with fibre inserts (FE) |
| DIN 3064 SE | Round flexible wires 6x36 Warrington-Seale with steel inserts (SE) |
| DIN 3066 FE | Round flexible wires 6x37 standard with fibre inserts (FE) |
| DIN 3066 SE | Round flexible wires 6x37 standard with steel inserts (SE) |
| DIN 3069 FE | Spiral round flexible wires 18x7, little turn with fiber inserts (FE) |
| DIN 3069 SE | Spiral round flexible wires 18x7, little turn with steel inserts (SE) |
| DIN 3088 A | Block ropes, A-elements |
| DIN 3088 X | Block ropes, X-elements |
| DIN 3090 N | Shaped steel thimbles for wire ropes, type N |
| DIN 3091 | Shaped steel thimbles for wire ropes, type N |
| DIN 3093-1 | Ferrules |
| DIN 311 | Machine bridge reamers with Morse taper, swirl fluted with swerve to the left |
| DIN 3110 | Engineers wrenches, double head, open end, with unequal jaw widths |
| DIN 3112 | Tee handled socket wrenches, single end |
| DIN 3113 A | Combination wrenches with equal openings, form A |
| DIN 3113 B | Combination wrenches with equal openings, form B |
| DIN 3114 | Single-head engineers jaw wrenches |
| DIN 3116 A | Pin-type face wrenches, form A |
| DIN 3116 B | Pin-type face wrenches, form B |
| DIN 3116 C | Pin-type face wrenches, form C |
| DIN 3116 D | Pin-type face wrenches, form D |
| DIN 3117 A | Adjustable wrenches, open end, form A |
| DIN 3117 B | Adjustable wrenches, open end, form B |
| DIN 3118 | Double-end flat flare nut wrenches with unequel openings |
| DIN 31211 B | Hinges, Form B |
| DIN 31211 N | Hinges, form N |
| DIN 31212 A | Hinges, outer half, form A |
| DIN 31212 J | Hinges, outer half, form J |
| DIN 31216-2 1 | Sash fasteners, double sided, ser. no. 1 |
| DIN 31216-2 2 | Sash fasteners, single sided, ser. no. 2 |
| DIN 31216-2 3 | Springs, ser. no. 3 |
| DIN 31216-2 4 | Bolts, ser. no. 4 |
| DIN 31216-2 5 | Base plates for outside surfaces, ser. no. 5 |
| DIN 31216-2 E | Rubbing plates, form E |
| DIN 31216-2 F | Rubbing plates, form F |
| DIN 3122 A | Drivingparts for hand operated square drive socket wrenches, form A |
| DIN 3122 B | Drivingparts for hand operated square drive socket wrenches, form B |
| DIN 3122 C | Drivingparts for hand operated square drive socket wrenches, form C |
| DIN 3122 CV | Drivingparts for hand operated square drive socket wrenches, form CV |
| DIN 3122 D | Drivingparts for hand operated square drive socket wrenches, form D |
| DIN 3122 E | Drivingparts for hand operated square drive socket wrenches, form E |
| DIN 3122 F | Drivingparts for hand operated square drive socket wrenches, form F |
| DIN 3122 G | Drivingparts for hand operated square drive socket wrenches, form G |
| DIN 3123 A | Attachments for hand operated square drive socket wrenches, form A |
| DIN 3123 B | Attachments for hand operated square drive socket wrenches, form B |
| DIN 3123 C | Attachments for hand operated square drive socket wrenches, form C |
| DIN 3123 D | Attachments for hand operated square drive socket wrenches, form D |
| DIN 3124 | Hand-operated socket wrenches, square drive for hexagon screw |
| DIN 3129 | Power square drive socket wrenches, rings |
| DIN 3129 | Power square drive socket wrenches, connection pins |
| DIN 3129 | Power square drive socket wrenches |
| DIN 3133 D | Toggle-type fasteners, sailent, with elongated base plate, form D |
| DIN 3133 G | Toggle-type fasteners, sailent, with elongated base plate, form G |
| DIN 3133 K | Toggle-type fasteners, sailent, with elongated base plate, form K |
| DIN 3134 D | Toggle-type fasteners with and without locking eye, form D |
| DIN 3134 E | Toggle-type fasteners with and without locking eye, form E |
| DIN 3135 A | Case handles |
| DIN 3135 B | Case handles |
| DIN 3135 E | Case handles |
| DIN 3135 F | Case handles |
| DIN 3136 | Chest handles, salient type |
| DIN 314 | Wing nuts, edged wings |
| DIN 315 | Wing nuts, rounded wings |
| DIN 3159 O | Flanged connections, oval |
| DIN 3159 R | Flanged connections, round |
| DIN 3159 V | Flanged connections square |
| DIN 316 | Wing screws |
| DIN 31691 A | Oil level eyes, form A |
| DIN 31691 B | Oil level eyes, form B |
| DIN 317 | Drill drifts for taper shanks with drift tang |
| DIN 319 C | Ball knobs, form C |
| DIN 319 E | Ball knobs, form E |
| DIN 319 L | Ball knobs, form L |
| DIN 319 M | Ball knobs, form M |
| DIN 322 G | Loose lubrication rings for general purposes |
| DIN 322 U | Loose lubrication rings for general purposes |
| DIN 3220 | Handwheels, flat type |
| DIN 3237-1 | Straight pattern valves with flange socket placed in main power connection |
| DIN 32500-1 KP | Ceramic rings for stud bolts, form KP |
| DIN 32500-1 P | Studs for drawn arc stud welding, form P |
| DIN 32500-2 KZ | Ceramic rings for unthreaded studs, form KZ |
| DIN 32500-2 Z | Studs for drawn arc stud welding, form Z |
| DIN 32500-3 | Studs for drawn arc stud welding, concrete anchor and shear connectors |
| DIN 32500-4 | Studs for drawn arc stud welding, T-studs |
| DIN 32500-5 | Studs for drawn arc stud welding |
| DIN 32501-1 | Welding studs with external thread |
| DIN 32501-2 | Studs for stud welding with tip ignition, unthreaded studs |
| DIN 32501-5 | Studs for stud welding with tip ignition, studs with internal thread for automatic feed |
| DIN 326-1 C | Slotting drills with Morse taper shank, form C |
| DIN 326-1 D | Slotting drills with Morse taper shank, form D |
| DIN 326-1 E | Slotting drills with Morse taper shank, form E |
| DIN 326-1 F | Slotting drills with Morse taper shank, form F |
| DIN 32620 | Bands |
| DIN 32620 A | Clamps, form A |
| DIN 32620 A | Clamps, form A |
| DIN 32620 B | Clamps, form B |
| DIN 32620 B | Clamps, form B |
| DIN 32676 | Clamp connections for stainless steel tubes - Weld-on type |
| DIN 32676 B | Blind clamping clips, form B |
| DIN 32676 D | Seals, form D |
| DIN 32676 GK | Clamp joints, form GK |
| DIN 32676 KK | Clamping unions, form KK |
| DIN 32676 KL | Clamping unions, form KL |
| DIN 327-1 A | Parallel shank slot drills, form A |
| DIN 327-1 B | Parallel shank slot drills, form B |
| DIN 327-1 C | Parallel shank slot drills, form C |
| DIN 327-1 D | Parallel shank slot drills, form D |
| DIN 327-1 G | Parallel shank slot drills, form G |
| DIN 327-1 H | Parallel shank slot drills, form H |
| DIN 327-1 J | Parallel shank slot drills, form J |
| DIN 327-1 K | Parallel shank slot drills, form K |
| DIN 3280-1 A | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 1, Form A with external thread on both sides |
| DIN 3280-1 B | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 1, Form B with internal thread on both sides |
| DIN 3280-1 E | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 1, Form E with hose connection on both sides |
| DIN 3280-2 | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Sleeves with hose connection, conical sealing |
| DIN 3280-2 | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Tubes with hose connection, conical sealing |
| DIN 3280-2 AG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Sleeves with external thread, form AG |
| DIN 3280-2 AG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Tubes with external thread, conical sealing, form AG |
| DIN 3280-2 IG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Sleeves with internal thread, form IG |
| DIN 3280-2 IG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Tubes with internal thread, conical sealing, form IG |
| DIN 3285 | Nipples and unions nominal pressure 10 - Hose nipples |
| DIN 3289 | Nipples and unions nominal pressure 10 - Threaded tapered union nipples |
| DIN 32891 | Round steel link chains - Grade 2, non-calibrated, tested |
| DIN 3292 | Nonferrous metal union nuts |
| DIN 3292-1 | Nonferrous metal union nuts |
| DIN 3292-2 | Malleable cast iron union nuts |
| DIN 333 A | Centre drills 60°, form A |
| DIN 333 B | Centre drills 60°, form B |
| DIN 333 R | Centre drills 60°, form R |
| DIN 334 A | Countersinks 60°, form A |
| DIN 334 B | Countersinks 60°, form B |
| DIN 334 C | Countersinks 60°, form C |
| DIN 334 D | Countersinks 60°, form D |
| DIN 33416 | 3D Person |
| DIN 335 A | Countersinks 90°, form A |
| DIN 335 B | Countersinks 90°, form B |
| DIN 335 C | Countersinks 90°, form C |
| DIN 335 D | Countersinks 90°, form D |
| DIN 3352-5 | Steel gate valves with exterior shaft thread |
| DIN 3352-5 I | Steel gate valves with interior shaft thread |
| DIN 3357-1 | Full bore steel ball valves |
| DIN 338 | Parallel shank twist drills, jobber series |
| DIN 339 | Parallel shank twist drills for use in jig bushes |
| DIN 340 | Parallel shank twist drills, long series |
| DIN 3401 drip-feed lubricator | Drip-feed lubricators and cups |
| DIN 3401 Lubricators | Drip-feed lubricators and cups |
| DIN 34016 A | Spring plates for spring bracket, form A |
| DIN 34016 B | Spring plates for spring bracket, form B |
| DIN 3402 A | Lubricating nipples, form A |
| DIN 3402 B | Lubricating nipples, form B |
| DIN 3402 C | Lubricating nipples, form C |
| DIN 3402 D | Lubricating nipples, form D |
| DIN 3404 A | Lubricating nipples, form A |
| DIN 3405 A | Lubricating nipples cupped type, form A |
| DIN 3405 B | Lubricating nipples cupped type, form B |
| DIN 3405 C | Lubricating nipples cupped type, form C |
| DIN 3405 D | Lubricating nipples cupped type, form D |
| DIN 341 | Morse taper shank twist drills for use in jig bushes, long series |
| DIN 3410 C1 | Oiler, form C1, directly |
| DIN 3410 C2 | Oiler, form C2, angular |
| DIN 3410 C3 | Oiler, form C3, directly |
| DIN 3410 E | Oiler, form E |
| DIN 3410 F | Oiler, form F |
| DIN 3411 A | Grease cups, form A |
| DIN 3411 B | Grease cups, form B |
| DIN 3411 D | Grease cups, form D |
| DIN 34110 | R-rings |
| DIN 343 | Core drills with Morse taper shank |
| DIN 344 | Core drills with parallel shank |
| DIN 345 | Morse taper shank twist drills |
| DIN 346 | Morse taper shank twist drills, oversize shank |
| DIN 347 A | Countersinks 120°, form A with cylindrical |
| DIN 347 B | Countersinks 120°, form B with a conic shaft |
| DIN 34800 B | Bolts and screws with external hexalobular driving feature with small flange, form B |
| DIN 34800 C | Bolts and screws with external hexalobular driving feature with small flange, form C |
| DIN 34801 B | Bolts and screws with external hexalobular driving feature with large flange, form B |
| DIN 34801 C | Bolts and screws with external hexalobular driving feature with large flange, form C |
| DIN 34802 | Hexalobular socket head cap screws with large driving feature |
| DIN 34805-1 | Button head screws - Part 1: Driving feature hexalobular socket |
| DIN 34805-2 | Button head screws - Part 2: Screws with collar and driving feature hexalobular socket |
| DIN 34814 | Plastic hexagon nuts |
| DIN 34815 | Plastic plain washers - Normal series |
| DIN 34816 | Plastic plain washers - Large series |
| DIN 34817 | Weld screws with metric thread |
| DIN 34819 C | Hexabular socket raised head tapping screws with collar |
| DIN 34819 F | Hexabular socket raised head tapping screws with collar |
| DIN 34819 R | Hexabular socket raised head tapping screws with collar |
| DIN 34821 | Cheese head screws with 12 point socket |
| DIN 34822 | Cheese head screws with flange with 12 point socket |
| DIN 34823 | Raised countersunk head screws with 12 point socket |
| DIN 34827 | Hexalobular socket set screws |
| DIN 34828 | Welding studs for turnbuckles |
| DIN 3489 B | Sealing coupling B |
| DIN 3489 B1 | Hose coupling B1 |
| DIN 3489 BA | Outside thread coupling BA |
| DIN 3489 BI | Inside thread coupling BI |
| DIN 3489 D | Gasket |
| DIN 3489 DB1 | Outside thread coupling DB1 |
| DIN 3489 DB2 | Inside thread coupling DB2 |
| DIN 3489 DB3 | Hose coupling DB3 |
| DIN 3489 VB | Sealing coupling with gasket VB |
| DIN 3489 VB1 | Hose coupling with gasket VB1 |
| DIN 3489 VBA | Outside thread coupling with joint washer VBA |
| DIN 3489 VBI | Inside thread coupling with gasket VBI |
| DIN 3489 VDB1 | Outside thread coupling with joint washer VDB1 |
| DIN 3489 VDB2 | Inside thread coupling with gasket VDB2 |
| DIN 3489 VDB3 | Hose coupling with gasket VDB3 |
| DIN 3502 B | Two-way valves oblique bonnet type PN 10 Y-type valve, form B |
| DIN 3502 C | Two-way valves oblique bonnet type PN 10 Y-type valve, form C |
| DIN 3502 E | Two-way valves oblique bonnet type PN 10 Y-type valve, form E |
| DIN 3502 V | Two-way valves oblique bonnet type PN 10 Y-type valve, form V |
| DIN 3509 VS | Outlets, form VS |
| DIN 3509 VSRB | Outlets, form VSRB |
| DIN 3512 B | Housing, form B |
| DIN 3512 C | Housing, form C |
| DIN 3512 E | Valves, form E |
| DIN 3512 V | Valves, form V |
| DIN 352 | Screwing taps in sets, set of three, for coarse pitch metric ISO-threads from M1 to M68 |
| DIN 353 | Set of taps in two Whitworth pipe thread R 1 / 8''to''R4 |
| DIN 3567 A | Pipe brackets for NW 20 to 500, form A |
| DIN 3567 A-1 | Pipe brackets for NW 20 to 500, form A |
| DIN 3567 B | Pipe brackets for NW 20 to 500, form B |
| DIN 3567 B-1 | Pipe brackets for NW 20 to 500, form B |
| DIN 3567 C | Pipe brackets for NW 20 to 500, form C |
| DIN 3567 C-1 | Pipe brackets for NW 20 to 500, form C |
| DIN 3568 | Clamping plates for the suspension of pipes on I and IP beams |
| DIN 357 | Nuts taps for metric ISO-threads from M3 to M68 |
| DIN 3570 A | Steel straps, for pipes of NW 20 to 500, form A |
| DIN 3570 B | Steel straps, for pipes of NW 20 to 500, form B |
| DIN 3670 B | Disc hand wheels, boss without groove |
| DIN 3670 N | Disc hand wheels, boss with groove |
| DIN 37081 A | Supports with hole |
| DIN 37081 C | Supports with pin |
| DIN 37081 D | Spring plate |
| DIN 37081 E | Spring plate |
| DIN 37082 B | Compression springs |
| DIN 37082 C | Spring bolt |
| DIN 371 | Machine taps with reinforced shank; for coarse pitch metric ISO-threads from M1 to M10 |
| DIN 373 | Counterbores with parallel shank and solid pilot |
| DIN 374 | Machine screwing taps, for fine pitch metric ISO-threads from M1.6 to M52 |
| DIN 375 | Counterbores with Morse taper shank and detacable pilot |
| DIN 376 | Machine screwing taps, for coarse pitch metric ISO-threads from M1,6 to M68 |
| DIN 3760 A | Radial-shaft seals, form A |
| DIN 3760 AS | Radial-shaft seals, form AS |
| DIN 3761-1 B | Rotary shaft lip type seals, form B |
| DIN 3761-1 BS | Rotary shaft lip type seals, form BS |
| DIN 3761-1 C | Rotary shaft lip type seals, form C |
| DIN 3761-1 CS | Rotary shaft lip type seals, form CS |
| DIN 377 | Extansions for tools with square |
| DIN 3771-1 | Fluid systems; O-rings |
| DIN 3844 | Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets |
| DIN 3861 A | Solderless tube fittings, cutting rings, form A |
| DIN 3861 B | Solderless tube fittings, cutting rings, form B |
| DIN 3862 | Solderless tube fittings, double cone rings |
| DIN 3863 B1 | Compression couplings, spherical liners, form B1 |
| DIN 3863 B2 | Compression couplings, spherical liners, form B2 |
| DIN 3867 | Solderless tube fittings, pressure rings |
| DIN 3869 | Profile sealing rings |
| DIN 3870 A2 | Non-soldering and soldering compression fittings, union nuts, series A2 |
| DIN 3870 A3 | Non-soldering and soldering compression fittings, union nuts, series A3 |
| DIN 3870 B1 | Non-soldering and soldering compression fittings, union nuts, series B1 |
| DIN 3870 B2 | Non-soldering and soldering compression fittings, union nuts, series B2 |
| DIN 3871 | Non-soldering and soldering compression couplings, socket unions, form A |
| DIN 3871 | Non-soldering and soldering compression couplings, socket unions, form B |
| DIN 3872 | Solderless tube fittings, union nuts |
| DIN 388-1 C | Handwheels from plastic with waves |
| DIN 39 D | Fixed ball knobs |
| DIN 39 E | Fixed ball knobs |
| DIN 390 B | Handwheel |
| DIN 390 C | Handwheels |
| DIN 3900 | Male stud connector, non soldered connections with cutting ring, tapered stud thread |
| DIN 3901 A | Non-soldering compression fittings with cutting ring. Double ended stud ends with parallel thread for stud ends type A |
| DIN 3901 B | Non-soldering compression fittings with cutting ring. Double ended stud ends with parallel thread for stud ends type B |
| DIN 3902 | Pipe unions |
| DIN 3903 | Non soldering compression fittings with cutting ring. Elbow studs with taper threaded stud end |
| DIN 3903 F | Non soldering compression fittings with cutting ring. Elbow studs with taper threaded stud end, Form F |
| DIN 3903 P | Non soldering compression fittings with cutting ring. Elbow studs with taper threaded stud end, Form P |
| DIN 3904 | Non-soldered taper-bush type pipe unions. Elbows used as an adaptor with parallel thread on screwed in end |
| DIN 3905 F | Pipe union elbows, form F |
| DIN 3905 P | Pipe union elbows, form P |
| DIN 3906 | Non soldering compression fittings with cutting ring. Branch T-studs with taper threaded stud end |
| DIN 3906 F | Non soldering compression fittings with cutting ring. Branch T-studs with taper threaded stud end, form F |
| DIN 3906 P | Non soldering compression fittings with cutting ring. Branch T-studs with taper threaded stud end, form P |
| DIN 3907 | Non-soldered taper bush type pipe unions. T-unions used as an adaptor with parallel thread on screwed-in end |
| DIN 3908 F | Non-soldering taper-bush type pipe unions, T-adaptors, form F |
| DIN 3908 P | Non-soldering taper-bush type pipe unions, T-adaptors, form P |
| DIN 3909 | Non-soldering taper-bush type pipe unions, single-ended fittings |
| DIN 3910 | Non-soldering taper-bush type pipe unions, straight bulkheads lead in fitting |
| DIN 3911 | Non-soldering taper-bush type pipe unions, elbow bulkheads lead in fitting |
| DIN 3913 | Non soldering compression fittings with cutting ring. Run L-studs with taper threaded stud end |
| DIN 3913 F | Non soldering compression fittings with cutting ring. Run L-studs with taper threaded stud end, form F |
| DIN 3913 P | Non soldering compression fittings with cutting ring. Run L-studs with taper threaded stud end, form P |
| DIN 3914 | Non-soldered taper bush type pipe unions. L-unions used as an adaptor with parallel thread on screwed-in end |
| DIN 3942 F | Swivel elbows with 24° cone connectors and O-ring, form F |
| DIN 3942 P | Swivel elbows with 24° cone connectors and O-ring, form P |
| DIN 3943 F | Swivel branch tees with 24° cone connectors and O-ring, form F |
| DIN 3943 P | Swivel branch tees with 24° cone connectors and O-ring, form P |
| DIN 3944 F | Swivel run tees with 24° cone connectors and O-ring, form F |
| DIN 3944 P | Swivel run tees with 24° cone connectors and O-ring, form P |
| DIN 3946 | Straight reducing swivel adaptors with 24° cone connectors with O-ring |
| DIN 3951 | Non-soldering taper-bush type pipe unions, cross adaptor |
| DIN 3952 | Non-soldering taper-bush type pipe unions, adjustable elbows |
| DIN 3953 | Non-soldering taper-bush type pipe unions, adjustable T-adapter |
| DIN 3954 | Non-soldering taper-bush type pipe unions, adjustable L-adapter |
| DIN 3955 | Double ended stud ends with parallel threads and shaft for stud ends type A |
DIN4X
| DIN 40008 C01 | Safety signs for electrotechnical engineering, form C01 |
| DIN 40008 C02 | Safety signs for electrotechnical engineering, form C02 |
| DIN 40008 C03 | Safety signs for electrotechnical engineering, form C03 |
| DIN 40008 C04 | Safety signs for electrotechnical engineering, form C04 |
| DIN 40008 H01 | Safety signs for electrotechnical engineering, form H01 |
| DIN 40008 H02 | Safety signs for electrotechnical engineering, form H02 |
| DIN 40008 H03 | Safety signs for electrotechnical engineering, form H03 |
| DIN 40008 H04 | Safety signs for electrotechnical engineering, form H04 |
| DIN 40008 M13 | Safety signs for electrotechnical engineering, form M13 |
| DIN 40008 M14 | Safety signs for electrotechnical engineering, form M14 |
| DIN 40008 P09 | Safety signs for electrotechnical engineering, form P09 |
| DIN 40008 P10 | Safety signs for electrotechnical engineering, form P10 |
| DIN 40008 P11 | Safety signs for electrotechnical engineering, form P11 |
| DIN 40008 P15 | Safety signs for electrotechnical engineering, form P15 |
| DIN 40008 P16 | Safety signs for electrotechnical engineering, form P16 |
| DIN 40008 P17 | Safety signs for electrotechnical engineering, form P17 |
| DIN 40008 P18 | Safety signs for electrotechnical engineering, form P18 |
| DIN 40008 P19 | Safety signs for electrotechnical engineering, form P19 |
| DIN 40008 P20 | Safety signs for electrotechnical engineering, form P20 |
| DIN 40008 S01 | Safety signs for electrotechnical engineering, form S01 |
| DIN 40008 S02 | Safety signs for electrotechnical engineering, form S02 |
| DIN 40008 W05 | Safety signs for electrotechnical engineering, form W05 |
| DIN 40008 W08 | Safety signs for electrotechnical engineering, form W08 |
| DIN 40008 W10 | Safety signs for electrotechnical engineering, form W10 |
| DIN 40008 W12 | Safety signs for electrotechnical engineering, form W12 |
| DIN 40008 W13 | Safety signs for electrotechnical engineering, form W13 |
| DIN 40008 W20 | Safety signs for electrotechnical engineering, form W20 |
| DIN 40008 W21 | Safety signs for electrotechnical engineering, form W21 |
| DIN 40008 W25 | Safety signs for electrotechnical engineering, form W25 |
| DIN 40008 W26 | Safety signs for electrotechnical engineering, form W26 |
| DIN 403 AA | Knurling wheels with parallel axis of grooves, form AA |
| DIN 403 BL | Left knurling wheels, form BL |
| DIN 403 BR | Right knurling wheels, form BR |
| DIN 403 GE | Left-Right knurling wheels, tops increased, form GE |
| DIN 403 GV | Left-Right knurling wheels, tops deepened, form GV |
| DIN 403 KE | Cross knurling wheels, tops increased, form KE |
| DIN 403 KV | Cross knurling wheels, tops deepened, form KV |
| DIN 404 | Slotted capstan screws |
| DIN 40401-1 | Gauges for Edison thread for D-type fuses "Go" ring gauges |
| DIN 40401-2 Gd | "Go" and "Not GO" plug gauges for D-type fuses |
| DIN 40401-2 Gk | "Go" and "Not GO" plug gauges for D-type fuses |
| DIN 40621 | Insulating sleeves B (without textile) |
| DIN 40628-1 | Insulating sleeves from silicone rubber |
| DIN 41307-2 L | Accessory parts, fixing angles for types M, EI und UI, form L |
| DIN 41307-2 W | Accessory parts, fixing angles for types M, EI und UI, form W |
| DIN 41496 A1 | Solder lugs without rotary protection form A1 |
| DIN 41496 A2 | Solder lugs without rotary protection form A2 |
| DIN 41496 A3 | Solder lugs without rotary protection form A3 |
| DIN 41496 B1 | Solder lugs without rotary protection form B1 |
| DIN 41496 B2 | Solder lugs without rotary protection form B2 |
| DIN 41496 B3 | Solder lugs without rotary protection form B3 |
| DIN 41496 J2 | Solder lugs for through plug connection form J2 |
| DIN 41496 K2 | Solder lugs for through plug connection form K2 |
| DIN 41496 L2 | Solder lugs for plug-in connection form L2 |
| DIN 41496 M1 | Solder pins with rivet collar (rolled from sheet) form M1 |
| DIN 41496 N1 | Solder pins with flange (rolled from sheet) form N1 |
| DIN 41496 Q | Soldering lugs, form Q |
| DIN 41496 R | Soldering lugs, form R |
| DIN 41496 S | Soldering lugs, form S |
| DIN 41496 U1 | Solder lugs with rivet shank form U1 |
| DIN 41496 U2 | Solder lugs with rivet shank form U2 |
| DIN 41496 U3 | Solder lugs with rivet shank form U3 |
| DIN 41496 V1 | Solder lugs with rivet shank form V1 |
| DIN 41496 V2 | Solder lugs with rivet shank form V2 |
| DIN 41496 V3 | Solder lugs with rivet shank form V3 |
| DIN 41496 W2 | Solder pins with collar (rolled from sheet) form W2 |
| DIN 41569 | G-fuses link 3 kV non-polarised |
| DIN 41570 | Device fuse |
| DIN 41571-2 | Cartridge fuse links 250 V, interchangeable, medium time-lag (M) |
| DIN 41571-3 | G-fuses link 250 V non-polarised, slow (T) |
| DIN 41576-2 | G-fuse link with signaling device 250 V non-polarised, medium slow (M) |
| DIN 41577-1 | G-fuse link with signaling device 250 V polarised, quick (F) |
| DIN 41577-2 | Indicating fuse links 250 V, non interchangeable, medium time-lag (M) |
| DIN 41617-2 | Contact gauges D |
| DIN 41617-2 LF | Multipole connector gauges LF |
| DIN 41617-2 LS | Strip gauges LS |
| DIN 41617-2 P | Test boards |
| DIN 41620-1 A | Connectors for printed circuits, multipoint socket connector without fixing beginning |
| DIN 41620-1 B | Connectors for printed circuits, multipoint socket connector with fixing beginning |
| DIN 41622 A | Multipol connectors |
| DIN 41622 B | Multipol connectors |
| DIN 41652-6 F | Multipol connectors |
| DIN 41652-6 S | Strips |
| DIN 41672 | G-fuse switch 6A 250 V with screw cap |
| DIN 41676 A | G-screw-plugs without window without slot |
| DIN 41676 AS | G-screw-plugs without window with slot |
| DIN 41676 B | G-screw-plugs with window |
| DIN 41676 BPL | G-screw-plugs with window and seal holes |
| DIN 41686 | G-fuse link 500 V non-polarised, medium slow (M), quick (F) |
| DIN 417 | Slotted set screws with full dog point |
| DIN 4189-1 | Woven wire cloth made of steel, stainles steel or non-ferrous metals |
| DIN 42553 D | Filling tube D |
| DIN 42553 E | Breather with snow guard E |
| DIN 427 | Slotted headless screws with chamfered end |
| DIN 42801 | Connecting bolts for voltage equalizing cable |
| DIN 42923 | Slide rails for electrical machines |
| DIN 431 A | Pipe nuts with thread, form A |
| DIN 431 B | Pipe nuts with thread, form B |
| DIN 43147-1 A | Dropper clamps for catenary wire: 35 mm² and 70 mm² to 185 mm², form A |
| DIN 43147-2 B | Dropper clamps for catenary wire: 35 mm² and 70 mm² to 95 mm², form B |
| DIN 43147-2 C | Dropper clamps for catenary wire: 120 mm², 150 mm² to 185 mm², form C |
| DIN 43147-3 D | Hanger clamps, slide-Hanger clamps for catenary wire, form D |
| DIN 43147-3 E | Hanger clamps, slide-Hanger clamps for catenary wire, form E |
| DIN 43161 A | Pins for overhead equipment |
| DIN 43165 A | Electric traction; screws with cup point for overhead fittings, form A |
| DIN 43165 B | Electric traction; screws with cup point for overhead fittings, form B |
| DIN 43165 C | Electric traction; screws with cup point for overhead fittings, form C |
| DIN 432 | Washers with external tap |
| DIN 43234 A | Interruptors for trains and vehicles form A |
| DIN 43234 B | Interruptors for trains and vehicles form B |
| DIN 433-1 | Washers, product grade A, up to hardness 250 HV, preferably for chesse head screws |
| DIN 433-2 | Washers, product grade A, from hardness 300 HV, preferably for chesse head screws |
| DIN 434 | Square taper washers for U-sections |
| DIN 435 | Square taper washers for I-sections |
| DIN 43560-1 A | Band fuse links 80 V, form A open |
| DIN 43560-1 AN | Band fuse links 80 V, form AN open |
| DIN 43560-1 B | Band fuse links 80 V, form B closed |
| DIN 43560-1 BN | Band fuse links 80 V, form BN closed |
| DIN 43579-7 D | Cap |
| DIN 43579-7 Z | Train lighting batteries |
| DIN 43589-1 | Female connectors with contact bushing |
| DIN 43589-1 B | Male connector with contact pins |
| DIN 436 | Square washers, especially for wood constructions |
| DIN 43650-1 A | Plug connectors, square type, contact boxes, form A |
| DIN 43650-1 A | Plug connectors, square type, connectors, form A |
| DIN 43650-1 B | Plug connectors, square type, contact boxes, form B |
| DIN 43650-1 B | Plug connectors, square type, connectors, form B |
| DIN 43670 | Bus bars of aluminium with square cross-section |
| DIN 43670 | Bus bars of aluminium with circle cross-section |
| DIN 43670 | Bus bars of aluminium with circle ring cross-section |
| DIN 43670-4 | Bus bars of aluminium with U-cross-section |
| DIN 43675-2 TP 78-120 | Connectors for connecting bolt, applicable up to 6300 A |
| DIN 43675-2 TP 78-180 | Connectors for connecting bolt, applicable up to 8000 A |
| DIN 43693 | Position switches with follower flat construction, enclosed |
| DIN 43697 D | Serial position switches |
| DIN 43735 | Electrical temperature sensors, inserts for thermocouple thermometers |
| DIN 43762 | Electrical temperature measuring sensors, inserts for resistance elements |
| DIN 43772 1 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 1 |
| DIN 43772 2 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 2 |
| DIN 43772 2F | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 2F |
| DIN 43772 2G | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 2G |
| DIN 43772 3 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 3 |
| DIN 43772 3F | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 3F |
| DIN 43772 3G | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 3G |
| DIN 43772 4 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 4 |
| DIN 43772 4F | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 4F |
| DIN 43772 5 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 5 |
| DIN 43772 6 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 6 |
| DIN 43772 7 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 7 |
| DIN 43772 8 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 8 |
| DIN 43772 9 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 9 |
| DIN 43772 HL | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, neck tubes |
| DIN 438 | Slotted set screws with cup point |
| DIN 439 A | Hex nuts, lower form A |
| DIN 439 B | Hexagon thin nuts, form B |
| DIN 440 R | Washers with round hole, especially for wood constructions, form R |
| DIN 440 V | Washers with square hole, especially for wood constructions, form V |
| DIN 442 | Sealing expanding caps |
| DIN 443 A | Sealing push-in caps, form A |
| DIN 443 B | Sealing push-in caps, form B |
| DIN 444 A | Eye bolts, form A |
| DIN 444 B | Eye bolts, form B |
| DIN 444 C | Eye bolts, form C |
| DIN 462 | Internal tab washers |
| DIN 4620 | Spring steel, hot-rolled for layered leaf springs |
| DIN 4621 A | Alignment clips, form A |
| DIN 4621 B | Alignment clips, form B |
| DIN 4621 C | Alignment clips, form C |
| DIN 4621 CS | Alignment clips, form CS |
| DIN 4621 D | Alignment clips, form D |
| DIN 4621 E | Alignment clips, form E |
| DIN 46211 A | Punched cable sockets, for copper conductor |
| DIN 46211 C | Punched cable sockets, for copper conductor |
| DIN 46225 A | Punched claw cable sockets with isolation for isolated wires |
| DIN 46225 B | Punched claw cable sockets with isolation for isolated wires with slot |
| DIN 46228-1 A | Tubular end-sleeves without plastic sleeve, form A |
| DIN 46228-2 B | Crimp-type end-splices, with and without insulation grip, form B |
| DIN 46228-2 C | Crimp-type end-splices, with and without insulation grip, form C |
| DIN 46228-3 D | Conductor-embracing end-splices, without insulation grip, form D |
| DIN 46228-4 E | Tubular end-sleeves with plastic sleeve, form D |
| DIN 46230 | Cable sockets for solderless connections, pin form, without isolation, for copper conductors |
| DIN 46231 | Cable sockets for solderless connections, isolated for copper conductors |
| DIN 46234 | Cable sockets for solderless connections, ring form, without isolation, for copper conductors |
| DIN 46235 | Cable sockets for compression connections, cover plate type, for copper conductors |
| DIN 46237 | Crush cable socket for solderless connections, isolated for copper conductors |
| DIN 46245-1 A | Push on contacts with insulating sleeve for plug breadth 2.8 |
| DIN 46245-1 B | Push on contacts with insulating sleeve for plug breadth 2.8 |
| DIN 46245-2 | Receptacles for tabs size 4.8, with insulating sleeve |
| DIN 46245-3 | Receptacles for tabs size 6.3, with insulating sleeve |
| DIN 46247-1 A | Push on contacts without insulating sleeve for plug breadth 2.8 |
| DIN 46247-1 B | Push on contacts without insulating sleeve for plug breadth 2.8 |
| DIN 46247-2 | Push on contacts without insulating sleeve for plug breadth 4.8 |
| DIN 46247-3 | Push on contacts without insulating sleeve for plug breadth 6.3 |
| DIN 46247-4 | Push on contacts without insulating sleeve for plug breadth 9.5 |
| DIN 4626 A | Center bolts for laminated leaf springs, form A |
| DIN 46285 | One to three pole terminal strip 380V ~440- |
| DIN 46288 A | Connecting washer for conductor junction, form A |
| DIN 46288 B | Connecting washer for conductor junction, form B |
| DIN 463 | Washers with 2 taps |
| DIN 46320-1 1 | Screwed glands for cables, clamping screws pos.-no.1 |
| DIN 46320-1 2 | Screwed glands for cables, intermediate connection pos.-no.2 |
| DIN 46320-1 3 | Screwed glands for cables, clamping screws pos.-no.3 |
| DIN 46320-1 4 | Screwed glands for cables, intermediate connection pos.-no.4 |
| DIN 46320-1 5 | Screwed glands for cables, intermediate connection pos.-no.5 |
| DIN 46320-1 6 | Screwed glands for cables, gaskets pos.-no.6 |
| DIN 46320-1 7 | Screwed glands for cables, gaskets pos.-no.7 |
| DIN 46320-1 8 | Screwed glands for cables, pressure rings pos.-no.8 |
| DIN 46320-1 9 | Screwed glands for cables, connecting thread-gaskets pos.-no.9 |
| DIN 46320-1 A | Screwed glands for cables, form A |
| DIN 46320-1 B | Screwed glands for cables, form B |
| DIN 46320-1 C | Screwed glands for cables, form C |
| DIN 46320-1 D | Screwed glands for cables, form D |
| DIN 46320-3 L | Flat nuts for screwed glands with steel conduit thread, form L |
| DIN 46320-3 M | Flat nuts for screwed glands with steel conduit thread, form M |
| DIN 46320-4 N | Lock for screwed glands, form N |
| DIN 46329 | Cable sockets for compression connections, ring type, for aluminium conductors |
| DIN 46330-1 A | Short push-in contact without insulation sleeve for plug breadth 2,4 |
| DIN 46340-1 A | Snap-in receptacles for tabs size 2.8, form A |
| DIN 46340-1 B | Snap-in receptacles for tabs size 2.8, form B |
| DIN 46340-3 A | Push on contacts with snap-in pin for boxes for plug breadth 6.3 |
| DIN 46340-3 B | Push on contacts with snap-in pin for boxes for plug breadth 6.3 |
| DIN 46340-4 | Snap-in receptacles for tabs size 9.5 |
| DIN 46340-5 A | Snap-in receptacles for tab size 7.7, form A |
| DIN 46340-5 B | Snap-in receptacles for tab size 7.7, form B |
| DIN 46341-1 A | Connectors without insulating sleeve for copper conductors form A |
| DIN 46341-1 B | Connectors without insulating sleeve for copper conductors form B |
| DIN 46342 A | Flat connections, straight, with mounting hole for push-on contacts |
| DIN 46342 B | Flat connections, 45° offset, with mounting hole for push-on contacts |
| DIN 46342 C | Flat connections, 90° offset, with mounting hole for push-on contacts |
| DIN 46343-1 A | Snap-in tabs for receptacle size 2.8, form A |
| DIN 46343-1 B | Snap-in tabs for receptacle size 2.8, form B |
| DIN 46343-2 A | Snap-in tabs for receptacle size 4.8, form A |
| DIN 46343-2 B | Snap-in tabs for receptacle size 4.8, form B |
| DIN 46343-3 A | Snap-in tabs for receptacle size 6.3, form A |
| DIN 46343-3 B | Snap-in tabs for receptacle size 6.3, form B |
| DIN 46343-4 | Flat connection with snap-in pin for enclosure for push-on contact 9.5 |
| DIN 46346 A | Flag receptables for tab size 6.3 |
| DIN 46346 B | Flag receptables for tab size 6.3 |
| DIN 464 | Knurled thumb screws, high type |
| DIN 464 SZ | Knurled thumb screws, high type SZ |
| DIN 46438 | Round copper cable highly flexible |
| DIN 465 | Slotted knurled thumb screws |
| DIN 466 | Knurled thumb nuts, high form |
| DIN 467 | Knurled thumb nuts, low form |
| DIN 468 D | Crank handles cranked, form D |
| DIN 468 F | Crank handles cranked, form F |
| DIN 469 D | Crank handles straight, form D |
| DIN 469 F | Crank handles straight, form F |
| DIN 470 | Sealing washers |
| DIN 471 | Retaining rings for shafts |
| DIN 472 | Retaining rings for bores |
| DIN 47705 | PVC screened and sheathed cable NYM |
| DIN 47726 | PVC cabling wire 05V, fine wired |
| DIN 47727 | PVC-conductor 07V, fine wired |
| DIN 47728 | Rubber hose 05RR und 05RRT |
| DIN 47729 | Rubber hose 05RN |
| DIN 47730 | Rubber hose 07RN |
| DIN 478 | Square screws with collar |
| DIN 479 | Square screws with short dog point |
| DIN 480 | Square head bolts with collar and short dog point with rounded end |
| DIN 48063-1 VN | Clip pins, form VN |
| DIN 48063-1 W | Clips, form W |
| DIN 48066-1 AN | Hinges, supporting hinges, form AN |
| DIN 48066-1 AS | Hinges, supporting hinges, form AS |
| DIN 48066-2 BN | Hinges, strain hinges, form BN |
| DIN 48066-2 BS | Hinges, strain hinges, form BS |
| DIN 48073 N | Connecting pin, with disk |
| DIN 48073 S | Connecting pin |
| DIN 48074 A | Straight plates and forks, connecting dimensions |
| DIN 48074 B | Straight plates and forks, connecting dimensions |
| DIN 48075-1 | Parallel groove clamps for aluminium stranded conductors |
| DIN 48075-2 | Parallel groove clamps for stranded conductors of cooper and bronce |
| DIN 48078-1 AS | Clevis straps for overhead lines, form AS |
| DIN 48078-1 BN | Clevis straps for overhead lines, form BN |
| DIN 48078-2 CS | Clevis straps for overhead lines, form CS |
| DIN 48078-2 DN | Clevis straps for overhead lines, form DN |
| DIN 48085-1 | Full tension compression joints for copper conductors |
| DIN 48085-2 | Full tension compression joints for aluminium conductors |
| DIN 48085-3 | Full tension compression joints for aluminium-steel conductors |
| DIN 48173 1 | Roof anchorage, anchor head clamps |
| DIN 48173 10 | Roof anchorage, sleeves |
| DIN 48173 12 | Roof anchorage, ball seals |
| DIN 48173 13 | Roof anchorage, seal rings |
| DIN 48173 14 | Roof anchorage, eye screws |
| DIN 48173 2 | Roof anchorage, brackets |
| DIN 48173 5 | Roof anchorage, Application cones |
| DIN 48173 6 | Roof anchorage, tie rods |
| DIN 48173 7 A | Roof anchorage, base plates without lead strips |
| DIN 48173 7 B | Roof anchorage, base plates with to braze plump slat |
| DIN 48173 8 | Roof anchorage, threaded rings |
| DIN 48173 9 | Roof anchorage, coupling nuts |
| DIN 4844-2 D-C001 | Safety marking - Combination signs, form D-C001 |
| DIN 4844-2 D-C002 | Safety marking - Combination signs, form D-C002 |
| DIN 4844-2 D-C003 | Safety marking - Combination signs, form D-C003 |
| DIN 4844-2 D-C004 | Safety marking - Combination signs, form D-C004 |
| DIN 4844-2 D-E001 | Safety marking - Direction indication for first-aid equipment, escape routes and emergency exits, form D-E001 |
| DIN 4844-2 D-E002 | Safety marking - Direction indication for first-aid equipment, escape routes and emergency exits, form D-E002 |
| DIN 4844-2 D-E003 | Safety marking - First aid, form D-E003 |
| DIN 4844-2 D-E004 | Safety marking - Patient wearing, form D-E004 |
| DIN 4844-2 D-E005 | Safety marking - Emergency shower, form D-E005 |
| DIN 4844-2 D-E006 | Safety marking - Eye rinsing device, form D-E006 |
| DIN 4844-2 D-E007 | Safety marking - Emergency telephone, form D-E007 |
| DIN 4844-2 D-E008 | Safety marking - Doctor, form D-E008 |
| DIN 4844-2 D-E009 | Safety marking - Rescue off / emergency exit, form D-E009 |
| DIN 4844-2 D-E010 | Safety marking - Rescue off / emergency exit, form D-E010 |
| DIN 4844-2 D-E011 | Safety marking - Collection point, form D-E011 |
| DIN 4844-2 D-E019 | Safety signs, emergency exit, form D-E019 |
| DIN 4844-2 D-F001 | Safety marking - Direction indication, form D-F001 |
| DIN 4844-2 D-F002 | Safety marking - Direction indication, form D-F002 |
| DIN 4844-2 D-F003 | Safety marking - Wandhydrant, Lösch schlauch, form D-F003 |
| DIN 4844-2 D-F004 | Safety marking - Ladder, form D-F004 |
| DIN 4844-2 D-F005 | Safety marking - Fire extinguisher, form D-F005 |
| DIN 4844-2 D-F006 | Safety marking - Fire alarm telephone, form D-F006 |
| DIN 4844-2 D-F007 | Safety marking - Resources and equipment for fire fighting, form D-F007 |
| DIN 4844-2 D-F008 | Safety marking - Fire detectors, form D-F008 |
| DIN 4844-2 D-H001 | Safety marking - Information signs, form D-H001 |
| DIN 4844-2 D-H002 | Safety marking - Information signs, form D-H002 |
| DIN 4844-2 D-H003 | Safety marking - Information signs, form D-H003 |
| DIN 4844-2 D-H004 | Safety marking - Information signs, form D-H004 |
| DIN 4844-2 D-H005 | Safety marking - Information signs, form D-H005 |
| DIN 4844-2 D-M000 | Safety marking - General mandatory signs, form D-M000 |
| DIN 4844-2 D-M001 | Safety marking - Use eye protection, form D-M001 |
| DIN 4844-2 D-M002 | Safety marking - Use head protection, form D-M002 |
| DIN 4844-2 D-M003 | Safety marking - Use of hearing protection, form D-M003 |
| DIN 4844-2 D-M004 | Safety marking - Use respiratory protection, form D-M004 |
| DIN 4844-2 D-M005 | Safety marking - Use foot protection, form D-M005 |
| DIN 4844-2 D-M006 | Safety marking - Use hand protection, form D-M006 |
| DIN 4844-2 D-M007 | Safety marking - Use protective clothing, form D-M007 |
| DIN 4844-2 D-M008 | Safety marking - Use face protection, form D-M008 |
| DIN 4844-2 D-M009 | Safety marking - Creating a collection belt, form D-M009 |
| DIN 4844-2 D-M010 | Safety marking - For pedestrians, form D-M010 |
| DIN 4844-2 D-M011 | Safety marking - Safety belt use, form D-M011 |
| DIN 4844-2 D-M012 | Safety marking - Transitional use, form D-M012 |
| DIN 4844-2 D-M013 | Safety marking - Before opening power plug, form D-M013 |
| DIN 4844-2 D-M014 | Safety marking - Disconnect power before working freely, form D-M014 |
| DIN 4844-2 D-M015 | Safety marking - Creating a rescue vest, form D-M015 |
| DIN 4844-2 D-M016 | Safety marking - Cutting plant oils, form D-M016 |
| DIN 4844-2 D-M017 | Safety marking - Honk, form D-M017 |
| DIN 4844-2 D-M018 | Safety marking - Instructions for use, form D-M018 |
| DIN 4844-2 D-M019 | Safety marking - Lock, form D-M019 |
| DIN 4844-2 D-M020 | Safety marking - Eye shielding for patients are, form D-M020 |
| DIN 4844-2 D-P000 | Safety marking - Prohibited, form D-P000 |
| DIN 4844-2 D-P001 | Safety marking - No smoking, form D-P001 |
| DIN 4844-2 D-P002 | Safety marking - Fires, open flames and smoking prohibition, form D-P002 |
| DIN 4844-2 D-P003 | Safety marking - For pedestrians prohibited, form D-P003 |
| DIN 4844-2 D-P004 | Safety marking - Extinguished with water prohibited, form D-P004 |
| DIN 4844-2 D-P005 | Safety marking - No drinking water, form D-P005 |
| DIN 4844-2 D-P006 | Safety marking - No entry for unauthorized persons, form D-P006 |
| DIN 4844-2 D-P007 | Safety marking - For industrial vehicles prohibited, form D-P007 |
| DIN 4844-2 D-P008 | Safety marking - Do not touch, form D-P008 |
| DIN 4844-2 D-P009 | Safety marking - Do not touch, housing live, form D-P009 |
| DIN 4844-2 D-P010 | Safety marking - Turn prohibited, form D-P010 |
| DIN 4844-2 D-P011 | Safety marking - Prohibition for persons with pacemaker, form D-P011 |
| DIN 4844-2 D-P012 | Safety marking - Parking or storage of prohibited, form D-P012 |
| DIN 4844-2 D-P013 | Safety marking - Persons prohibited transportation, form D-P013 |
| DIN 4844-2 D-P014 | Safety marking - Animals are prohibited, form D-P014 |
| DIN 4844-2 D-P015 | Safety marking - Entering the prohibited area, form D-P015 |
| DIN 4844-2 D-P016 | Safety marking - Prohibited for people with metal implants, form D-P016 |
| DIN 4844-2 D-P017 | Safety marking - Spraying with water prohibited, form D-P017 |
| DIN 4844-2 D-P018 | Safety marking - Mobile prohibited, form D-P018 |
| DIN 4844-2 D-P019 | Safety marking - Food and drink prohibited, form D-P019 |
| DIN 4844-2 D-P020 | Safety marking - Carrying metal parts or watches prohibited, form D-P020 |
| DIN 4844-2 D-P021 | Safety marking - Carrying of magnetic or electronic media prohibited, form D-P021 |
| DIN 4844-2 D-P022 | Safety marking - Climb for unauthorized persons, form D-P022 |
| DIN 4844-2 D-P023 | Safety marking - Enter prohibited Behind the arm, form D-P023 |
| DIN 4844-2 D-P024 | Safety marking - Reach into a pile prohibited, form D-P024 |
| DIN 4844-2 D-P025 | Safety marking - Prohibited this device in the bathtub, shower or sink filled with water to use, form D-P025 |
| DIN 4844-2 D-P026 | Safety marking - Take into prohibited, form D-P026 |
| DIN 4844-2 D-P027 | Safety marking - Operation prohibited tie, form D-P027 |
| DIN 4844-2 D-P028 | Safety marking - Prohibited operation with necklace, form D-P028 |
| DIN 4844-2 D-P029 | Safety marking - Prohibited operation with long hair, form D-P029 |
| DIN 4844-2 D-P030 | Safety marking - Do not cover, form D-P030 |
| DIN 4844-2 D-P031 | Safety marking - Not for use in residential areas, form D-P031 |
| DIN 4844-2 D-P032 | Safety marking - Node prohibited, form D-P032 |
| DIN 4844-2 D-P033 | Safety marking - No needles prick, form D-P033 |
| DIN 4844-2 D-P034 | Safety marking - Do not fold or pushed together, form D-P034 |
| DIN 4844-2 D-P035 | Safety marking - Not permitted for hand-grinding and hand-held, form D-P035 |
| DIN 4844-2 D-P036 | Safety marking - Not permitted for side grinding, form D-P036 |
| DIN 4844-2 D-P037 | Safety marking - Not permitted for wet grinding, form D-P037 |
| DIN 4844-2 D-S001 | Safety marking - Supplementary signs, form D-S001 |
| DIN 4844-2 D-S002 | Safety marking - Supplementary signs, form D-S002 |
| DIN 4844-2 D-W000 | Safety marking - Warning of a potential danger, form D-W000 |
| DIN 4844-2 D-W001 | Safety marking - Warning of flammable substances, form D-W001 |
| DIN 4844-2 D-W002 | Safety marking - Warning of explosive materials, form D-W002 |
| DIN 4844-2 D-W003 | Safety marking - Warning of toxic substances, form D-W003 |
| DIN 4844-2 D-W004 | Safety marking - Warning of corrosive substances, form D-W004 |
| DIN 4844-2 D-W005 | Safety marking - Warning of radioactive substances or ionizing radiation, form D-W005 |
| DIN 4844-2 D-W006 | Safety marking - Warning of suspended load, form D-W006 |
| DIN 4844-2 D-W007 | Safety marking - Warning of industrial materials handling vehicles, form D-W007 |
| DIN 4844-2 D-W008 | Safety marking - Warning of dangerous electrical voltage, form D-W008 |
| DIN 4844-2 D-W009 | Safety marking - Warning against optical radiation, form D-W009 |
| DIN 4844-2 D-W010 | Safety marking - Warning of laser beam, form D-W010 |
| DIN 4844-2 D-W011 | Safety marking - Warning of brand promotional materials, form D-W011 |
| DIN 4844-2 D-W012 | Safety marking - Warning of non-ionizing, electromagnetic radiation, form D-W012 |
| DIN 4844-2 D-W013 | Safety marking - Warning of a magnetic field, form D-W013 |
| DIN 4844-2 D-W014 | Safety marking - Warning of the danger of stumbling, form D-W014 |
| DIN 4844-2 D-W015 | Safety marking - Warning of danger of falling, form D-W015 |
| DIN 4844-2 D-W016 | Safety marking - Warning bio hazard, form D-W016 |
| DIN 4844-2 D-W017 | Safety marking - Warning against cold, form D-W017 |
| DIN 4844-2 D-W018 | Safety marking - Warning of harmful or irritating substances, form D-W018 |
| DIN 4844-2 D-W019 | Safety marking - Warning of gas cylinders, form D-W019 |
| DIN 4844-2 D-W020 | Safety marking - Warning against the dangers of batteries, form D-W020 |
| DIN 4844-2 D-W021 | Safety marking - Warning of explosive atmosphere, form D-W021 |
| DIN 4844-2 D-W022 | Safety marking - Warning of routing shaft, form D-W022 |
| DIN 4844-2 D-W023 | Safety marking - Warning of danger of crushing, form D-W023 |
| DIN 4844-2 D-W024 | Safety marking - Warning against tipping during rolling, form D-W024 |
| DIN 4844-2 D-W025 | Safety marking - Beware of automatic start, form D-W025 |
| DIN 4844-2 D-W026 | Safety marking - Beware of hot surfaces, form D-W026 |
| DIN 4844-2 D-W027 | Safety marking - Warning of hand injuries, form D-W027 |
| DIN 4844-2 D-W028 | Safety marking - Warning of danger of slipping, form D-W028 |
| DIN 4844-2 D-W029 | Safety marking - Warning of dangers of a conveyor system in the track, form D-W029 |
| DIN 4844-2 D-W030 | Safety marking - Warning of danger feeding, form D-W030 |
| DIN 4844-2 D-W031 | Safety marking - Warning introduce Eng, form D-W031 |
| DIN 4844-2 M028 | Safety marking, barriers, form M028 |
| DIN 4844-2 M029 | Safety marking, horns, form M029 |
| DIN 4844-2 P016 | Safety marking - Not permitted for wet grinding, form P016 |
| DIN 4844-2 WSE001 | Safety signs, Public Rescue Equipment, form WSE001 |
| DIN 4844-2 WSM001 | Safety marking, using lifejacket, form WSM001 |
| DIN 4844-2 WSM002 | Safety marking, supervise children in water, form WSM002 |
| DIN 4844-2 WSP001 | Safety marking - Running forbidden, form WSP001 |
| DIN 4844-2 WSP002 | Safety marking - Prohibited Swimming, form WSP002 |
| DIN 4844-2 WSP003 | Safety marking - Prohibited snorkeling, form WSP003 |
| DIN 4844-2 WSP004 | Safety marking - Prohibited scuba diving, form WSP004 |
| DIN 4844-2 WSP005 | Safety marking - Prohibited plunge, form WSP005 |
| DIN 4844-2 WSP006 | Safety marking - Sailing forbidden, form WSP006 |
| DIN 4844-2 WSP007 | Safety marking - Windsurfing prohibited, form WSP007 |
| DIN 4844-2 WSP008 | Safety marking - Muscle-powered boats, form WSP008 |
| DIN 4844-2 WSP009 | Safety marking - Machines powered boats, form WSP009 |
| DIN 4844-2 WSP010 | Safety marking - Banned jet skis, form WSP010 |
| DIN 4844-2 WSP011 | Safety marking - Forbidden water skiing activities, form WSP011 |
| DIN 4844-2 WSP013 | Safety marking - Wearing street shoes forbidden, form WSP013 |
| DIN 4844-2 WSP018 | Safety marking - Banned kite surfing, form WSP018 |
| DIN 4844-2 WSP019 | Safety marking - Parasailing prohibited, form WSP019 |
| DIN 4844-2 WSP020 | Safety marking - Prohibited beach sailing, form WSP020 |
| DIN 4844-2 WSW001 | Safety signs, warning of thin ice, form WSW001 |
| DIN 4844-2 WSW002 | Safety signs, warning of slipway, form WSW002 |
| DIN 4844-2 WSW003 | Safety signs, warning of water-skiing area, shape WSW003 |
| DIN 4844-2 WSW005 | Safety signs, warning of deep water, form WSW005 |
| DIN 4844-2 WSW006 | Safety signs, warning of shallow water (diving), form WSW006 |
| DIN 4844-2 WSW008 | Safety signs, warning of sudden depth change in swimming or recreation pool, form WSW008 |
| DIN 4844-2 WSW010 | Safety signs, warning of an unstable cliff edge, shape WSW010 |
| DIN 4844-2 WSW011 | Safety signs, warning of falling rocks from unstable cliff, form WSW011 |
| DIN 4844-2 WSW013 | Safety signs, warning of wastewater discharge, shape WSW013 |
| DIN 4844-2 WSW015 | Safety signs, warning of strong currents, form WSW015 |
| DIN 4844-2 WSW016 | Safety signs, warning of vessel traffic, form WSW016 |
| DIN 4844-2 WSW017 | Safety signs, warning of beach sailing, form WSW017 |
| DIN 4844-2 WSW020 | Safety signs, warning of kitesurfing, form WSW020 |
| DIN 4844-2 WSW021 | Safety signs, warning of parasailing, form WSW021 |
| DIN 4844-2 WSW023 | Safety signs, warning of high surf or heavy breaking seas, shape WSW023 |
| DIN 4844-2 WSW024 | Safety signs, warning of steep sloping beach, form WSW024 |
| DIN 49003 A | Elbow |
| DIN 49003 B | Elbow |
| DIN 49012 G | Metal tubes (without plastic cladding and without metal netting) |
| DIN 49012 H | Metal tubes with retardant plastic cladding |
| DIN 49012 I | Metal tubes with plastic cladding |
| DIN 49012 K | Metal tubes with metal netting |
| DIN 49012 L | Metal tubes with retardant plastic cladding and metal netting |
| DIN 49012 M | Metal tubes with plastic cladding and metal netting |
| DIN 49016-2 GM | Socket pipes for medium compressive stress |
| DIN 49016-2 KM | Socket elbows for medium compressive stress |
| DIN 49016-2 LM | Socket pipes for hard compressive stress |
| DIN 49016-2 NM | Socket elbows for hard compressive stress |
| DIN 49016-3 GH | Pipes |
| DIN 49016-3 HH | Sockets |
| DIN 49016-3 KH | Elbow |
| DIN 49017-2 GM | Socket pipes for light compressive stress |
| DIN 49017-2 KM | Socket elbow |
| DIN 49018-1 A | Flexible corrugated and inflammable conduits of insulating material for middle pressure load, form A |
| DIN 49018-1 B | Flexible corrugated and inflammable conduits of insulating material for middle pressure load, form B |
| DIN 49018-1 HA | Sockets for middle pressure load, form HA |
| DIN 49018-1 HB | Sockets for light pressure load, form HB |
| DIN 49018-2 | Flexible corrugated and inflammable conduits of insulating material with plain mantle and for heavy pressure load |
| DIN 49018-3 AS CF 105 | Flexible retardant insulating material pipes corrugated |
| DIN 49019-2 A | Flexible non-retardant insulating material pipes |
| DIN 49020 A | Armored steel tubes with or without socket |
| DIN 49020 AS | Tube |
| DIN 49020 B | Sockets, form B |
| DIN 49020 BS | Sockets, form BS |
| DIN 49023 AS | Flexible steel pipes corrugated for high pressure demands |
| DIN 49073 GA | Metal boxes, form GA |
| DIN 49073 GB | Isolating material sockets, form GB |
| DIN 49073 GC | Isolating material sockets, form GC |
| DIN 49073 TA | Isolating material sockets, form TA |
| DIN 49073 TB | Gerätedosen aus Isolierstoff, Form TB |
| DIN 49073 TC | Isolating material sockets, form TC |
| DIN 49329 | D-Fuse-base for forefront connection, D IV 100A 750V |
| DIN 49360-1 | D-Screw plug E16 25A 500V |
| DIN 49447 A1 | On-Wall receptacles, form A1 with closed fixing holes |
| DIN 49447 A2 | On-Wall receptacles and plug sockets, form A2 with open fixing holes |
| DIN 49447 B1 | In-wall receptacles, form B1 with closed mounting holes |
| DIN 49447 B2 | In-wall receptacles, form B2 with open mounting holes |
| DIN 4950 A | Carbide tips, form A |
| DIN 4950 B | Carbide tips, form B |
| DIN 4950 C | Carbide tips, form C |
| DIN 4950 D | Carbide tips, form D |
| DIN 4950 E | Carbide tips, form E |
| DIN 49500 | Line safety switches 6 to 25 A 415~ and 250V- for screw-in in fuse base D II |
| DIN 4951 L | Straight turning tools with high speed steel tips, form L left straight turning tool |
| DIN 4951 R | Straight turning tools with high speed steel tips, form R right straight turning tool |
| DIN 49511 | D-Fuse base for forefront connection, D IV H 100A 500V |
| DIN 49516 DP | Screw-in gage ring and sleeve socket for D-fuses D II, D III, D IV H |
| DIN 49516 P | Gauge ring key for D-screw and D-bush, screw-in D II, D III, D IV H |
| DIN 4952 L | Bent turning tools with high speed steel tips, form L left bent turning tool |
| DIN 4952 R | Bent turning tools with high speed steel tips, form R right bent turning tool |
| DIN 49522 | D-Fuse link; D , D 02, D 03, ~400V-250V |
| DIN 49523 | Gauge-pieces D01, D02, D03, and functional for gauge-piece hand-keys |
| DIN 49525-1 | D-Screw plugs D 01,D 02,D 03, 380 V |
| DIN 4953 | Boring tools with high speed steel tips |
| DIN 4954 | Internal side turning tools for corner work with high speed steel tips |
| DIN 4955 | Straight turning tools with high speed steel tips |
| DIN 4956 | Wide face square nase tools with high speed steel tips |
| DIN 4960 L | Offset side turning tools with high speed steel tips, form L left offset side turning tool |
| DIN 4960 R | Offset side turning tools with high speed steel tips, form R right offset side turning tool |
| DIN 4961 L | Parting-off tools with high speed steel tips, form L left parting-off tool |
| DIN 4961 R | Parting-off tools with high speed steel tips, form R right parting-off tool |
| DIN 4963 L | Right angle parting-off tools with high speed steel tips, form L left right angle parting-off tool |
| DIN 4963 R | Right angle parting-off tools with high speed steel tips, form R right right angle parting-off tool |
| DIN 4964-1 A | Wallower of high-speed steel with rotund cross section |
| DIN 4964-1 B | Wallower of high-speed steel with square cross section |
| DIN 4964-1 C | High-speed steel tool holder bits with triangular cross-section |
| DIN 4964-1 D | Wallower of high-speed steel with rectangle cross section |
| DIN 4964-1 E | Wallower of high-speed steel with trapeze cross section |
| DIN 4965 L | Bent tools for corner work with high speed steel tips, form L left bent tool for corner work |
| DIN 4965 R | Bent tools for corner work with high speed steel tips, form R right bent tool for corner work |
| DIN 4966 G | Carbide tips for light cutting operations, form G |
| DIN 4966 H | Carbide tips for light cutting operations, form H |
| DIN 4966 J | Carbide tips for light cutting operations, form J |
| DIN 4967-1 CCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form CCMT |
| DIN 4967-1 CCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form CCMW |
| DIN 4967-1 DCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form DCMT |
| DIN 4967-1 DCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form DCMW |
| DIN 4967-1 RCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form RCMT |
| DIN 4967-1 RCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form RCMW |
| DIN 4967-1 SCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form SCMW |
| DIN 4967-1 SCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form SCMW |
| DIN 4967-1 TCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form TCMT |
| DIN 4967-1 TCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form TCMW |
| DIN 4968 SNGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SNGN |
| DIN 4968 SNUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SNUN |
| DIN 4968 SPGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SPGN |
| DIN 4968 SPMR | Indexable hardmetal inserts with rounded corners, without fixation hole, form SPMR |
| DIN 4968 SPUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SPUN |
| DIN 4968 TNGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TNGN |
| DIN 4968 TNUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TNUN |
| DIN 4968 TPGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TPGN |
| DIN 4968 TPMR | Indexable hardmetal inserts with rounded corners, without fixation hole, form TPMR |
| DIN 4968 TPUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TPUN |
| DIN 4968-1 SNGN | Throwaway carbide indexable inserts for turning, form SNGN |
| DIN 4968-1 SNUN | Throwaway carbide indexable inserts for turning, form SNUN |
| DIN 4968-1 SPGN | Throwaway carbide indexable inserts for turning, form SPGN |
| DIN 4968-1 SPUN | Throwaway carbide indexable inserts for turning, form SPUN |
| DIN 4968-1 TNGN | Throwaway carbide indexable inserts for turning, form TNGN |
| DIN 4968-1 TNUN | Throwaway carbide indexable inserts for turning, form TNUN |
| DIN 4968-1 TPGN | Throwaway carbide indexable inserts for turning, form TPGN |
| DIN 4968-1 TPUN | Throwaway carbide indexable inserts for turning, form TPUN |
| DIN 4968-3 SNAN | Carbide indexable inserts for milling, form SNAN |
| DIN 4968-3 SNCN | Carbide indexable inserts for milling, form SNCN |
| DIN 4968-3 SNEN | Carbide indexable inserts for milling, form SNEN |
| DIN 4968-3 SPAN | Carbide indexable inserts for milling, form SPAN |
| DIN 4968-3 SPCN | Carbide indexable inserts for milling, form SPCN |
| DIN 4969 A | Ceramic indexable inserts, form A triangular plate without clearance angle |
| DIN 4969 C | Ceramic indexable inserts, form C quadratic plate without clearance angle |
| DIN 4969 E | Ceramic indexable inserts, form E rhombic plate without clearance angle |
| DIN 4971 L | Straight turning tools with carbide tips, form L left straight turning tool |
| DIN 4971 R | Straight turning tools with carbide tips, form R right straight turning tool |
| DIN 4972 L | Bent turning tools with carbide tips, form L left bent turning tool |
| DIN 4972 R | Bent turning tools with carbide tips, form R right bent turning tool |
| DIN 4973 | Boring tools with carbide tips |
| DIN 4974 | Internal side turning tools for corner work with carbide tips |
| DIN 4975 | Pointed straight turning tools with carbide tips |
| DIN 4976 | Wide face square nase tools with carbide tips |
| DIN 4977 L | Offset face turning tools with carbide tips, form L left offset face turning tool |
| DIN 4977 R | Offset face turning tools with carbide tips, form R right offset face turning tool |
| DIN 4978 L | Offset turning tools for corner work with carbide tips, form L left offset turning tool for corner work |
| DIN 4978 R | Offset turning tools for corner work with carbide tips, form R right offset turning tool for corner work |
| DIN 4980 L | Offset side turning tools with carbide tips, form L left offset side turning tool |
| DIN 4980 R | Offset side turning tools with carbide tips, form R right offset side turning tool |
| DIN 4981 L | Parting-off tools with carbide tips, form L left parting-off tool |
| DIN 4981 R | Parting-off tools with carbide tips, form R right parting-off tool |
| DIN 49810-5 | Lamps for firedamp and explosion protected hand lamps (HT) |
| DIN 49812-1 A1 | General lighting service lamps, tubular lampes, form A1 |
| DIN 49812-1 A2 | General lighting service lamps, tubular lampes, form A2 |
| DIN 49812-1 A3 | General lighting service lamps, tubular lampes, form A3 |
| DIN 49812-1 A4 | General lighting service lamps, tubular lampes, form A4 |
| DIN 49812-1 C1 | General lighting service lamps, pigmy lampes, form C1 |
| DIN 49812-1 C2 | General lighting service lamps, pigmy lampes, form C2 |
| DIN 49812-2 B | General lighting service lamps, round bulb lamps, form B |
| DIN 49812-2 D | General lighting service lamps, large candle lamps, form D |
| DIN 49812-3 E | General lighting service lamps, mushroom lamps, form E |
| DIN 49812-4 B | Lamp unit for firedamp and explosion protected signal lamp, form B |
| DIN 49812-4 C1 | Lamp unit for firedamp and explosion protected signal lamp, form C1 |
| DIN 49812-4 C2 | Lamp unit for firedamp and explosion protected signal lamp, form C2 |
| DIN 49846-1 K | Miniature lamps, form K |
| DIN 49846-2 LA | Miniature lamps, form LA |
| DIN 49846-2 LB | Miniature lamps, form LB |
| DIN 49846-3 LC | Miniature lamps, form LC |
| DIN 49846-3 LD | Miniature lamps, form LD |
| DIN 49848-1 B1 | Bicycle incandescent lamps, form B1 |
| DIN 49848-1 B2 | Bicycle incandescent lamps, form B2 |
| DIN 49848-1 B3 | Bicycle incandescent lamps, form B3 |
| DIN 49848-2 HS3 | Bicycle incandescent lamps, form HS3 |
| DIN 49852 A | Fluorescent tubes and light bulbs for gauge aims, form A |
| DIN 49852 B | Fluorescent tubes and light bulbs for gauge aims, form B |
| DIN 4988 CNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form CNMA |
| DIN 4988 CNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form CNMG |
| DIN 4988 CNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form CNMM |
| DIN 4988 DNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form DNMA |
| DIN 4988 DNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form DNMG |
| DIN 4988 DNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form DNMM |
| DIN 4988 RNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form RNMA |
| DIN 4988 RNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form RNMG |
| DIN 4988 SNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form SNMA |
| DIN 4988 SNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form SNMG |
| DIN 4988 SNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form SNMM |
| DIN 4988 TNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form TNMA |
| DIN 4988 TNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form TNMG |
| DIN 4988 TNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form TNMM |
DIN5X
| DIN 50125 A | Tensile test pieces, form A |
| DIN 50125 B | Tensile test pieces, form B |
| DIN 50125 C | Tensile test pieces, form C |
| DIN 50125 D | Tensile test pieces, form D |
| DIN 50125 E | Tensile test pieces, form E |
| DIN 50125 F | Tensile test pieces, form F |
| DIN 50125 G | Tensile test pieces, form G |
| DIN 50125 H | Tensile test pieces, form H |
| DIN 503 A | Flange bearings, Form A |
| DIN 503 B | Flange bearings, Form B |
| DIN 504 A | Eye type bearings, Form A |
| DIN 504 B | Eye type bearings, Form B |
| DIN 505 L | Cap bearings, Form L |
| DIN 505 M | Half bearings, Form M |
| DIN 506 A | Cap bearings, Form A |
| DIN 506 C | Half bearings, Form C |
| DIN 508 | Nuts for T-grooves |
| DIN 5159 A | Circular screwing dies for taper pipe threads R1/16 to R2, form A |
| DIN 5159 B | Circular screwing dies for taper pipe threads R1/16 to R2, form B |
| DIN 522 A | Washers of metallic material, class A |
| DIN 522 C | Washers of metallic material, class C |
| DIN 522 F | Washers of metallic material, class F |
| DIN 523 | Lathe mandrels |
| DIN 525 B | Studs for welding, form B |
| DIN 525 C | Studs for welding, form C |
| DIN 5279 A | Chandelier chains, chain elements of sheet metal, form A |
| DIN 5279 B | Chandelier chains, chain elements of sheet metal, form B |
| DIN 5287 A | Simplex hook (spring hooks made of one piece), form A |
| DIN 5287 B | Simplex hooks (spring hooks made of one piece), form B |
| DIN 529 | Masonry bolts |
| DIN 529 A | Masonry bolts, form A |
| DIN 529 A Mu SHB | Masonry bolts, form A, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 B | Masonry bolts, form B |
| DIN 529 B Mu SHB | Masonry bolts, form B, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 C | Masonry bolts, form C |
| DIN 529 C Mu SHB | Masonry bolts, form C, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 D | Masonry bolts, form D |
| DIN 529 D Mu SHB | Masonry bolts, form D, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 E | Masonry bolts, form E |
| DIN 529 E Mu SHB | Masonry bolts, form E, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 F | Masonry bolts, form F |
| DIN 529 F Mu SHB | Masonry bolts, form F, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 G | Masonry bolts, form G |
| DIN 529 G Mu SHB | Masonry bolts, form G, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 Mu SHB | Masonry bolts, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 5290-1 A | Snap hook from light metal with setting nut, form A |
| DIN 5290-2 F | Light metal snap hook without setting nut, form F |
| DIN 5291 | Roll buckles |
| DIN 5292 | Strap buckles |
| DIN 5293 | Eyes for straps and belts |
| DIN 5296 A | Rings, form A, welded |
| DIN 5296 B | Rings, form B, not welded |
| DIN 5296 C | Rings, form C, welded (half round) |
| DIN 5297-1 A | Spring snap with fixed square eye, form A |
| DIN 5297-1 B | Spring snaps with fixed square eye, form B |
| DIN 5299 A | Snap hooks half-round wire, round wire and forged, form A |
| DIN 5299 B | Snap hooks half-round wire, round wire and forged, form B |
| DIN 5299 C | Snap hooks half-round wire, round wire and forged, form C |
| DIN 5299 D | Snap hooks half-round wire, round wire and forged, form D |
| DIN 5299 E | Snap hooks half-round wire, round wire and forged, form E |
| DIN 536-1 A | Craine rails dimensions, sectional properties, steel grades for crane rails with foot flange, form A |
| DIN 5401 | Roller bearings, balls for roller bearings |
| DIN 5402-1 | Cylindrical rollers |
| DIN 5402-3 A | Needle rollers, form A |
| DIN 5402-3 B | Needle rollers, form B |
| DIN 5405-1 | Needle roller and cage assemblies |
| DIN 5405-1 | Needle roller bearings, Needle roller and cage assemblies (simplified model) |
| DIN 5405-2 | Axial-needle wreaths |
| DIN 5405-2 | Axial-needle wreaths (simplified model) |
| DIN 5405-3 | Needle roller bearings, thrust washers |
| DIN 5406 MB | Lockwashers; safety plates |
| DIN 5406 MS | Lockwashers, lockclips |
| DIN 5412-1 HJ | Cylindrical roller bearings, separate thrust collars |
| DIN 5412-1 HJ | Cylindrical roller bearings, separate thrust collars (simplified model) |
| DIN 5412-1 N | Cylindrical roller bearings, single row, N |
| DIN 5412-1 N | Cylindrical roller bearings, single row, with cage, type N (simplified model) |
| DIN 5412-1 NJ | Cylindrical roller bearings, single row, NJ |
| DIN 5412-1 NJ | Cylindrical roller bearings, single row, with cage, type NJ (simplified model) |
| DIN 5412-1 NU | Cylindrical roller bearings, single row, NU |
| DIN 5412-1 NU | Cylindrical roller bearings, single row, with cage, type NU (simplified model) |
| DIN 5412-1 NUP | Cylindrical roller bearings, single row, NUP |
| DIN 5412-1 NUP | Cylindrical roller bearings, single row, with cage, type NUP (simplified model) |
| DIN 5412-1 RNU | Cylindrical roller bearings, single row, RNU |
| DIN 5412-1 RNU | Cylindrical roller bearings, single row, with cage, type RNU (simplified model) |
| DIN 5412-4 NN | Cylindrical roller bearings, double row, NN |
| DIN 5412-4 NN | Cylindrical roller bearings, double row, with cage, increased accuracy (simplified model) |
| DIN 5412-4 NNK | Cylindrical roller bearings, double row, NNK |
| DIN 5412-4 NNK | Cylindrical roller bearings, double row, NNK (simplified model) |
| DIN 5412-4 NNU | Cylindrical roller bearings, double row, NNU |
| DIN 5412-4 NNU | Cylindrical roller bearings, double row, with cage, increased accuracy (simplified model) |
| DIN 5412-4 NNUK | Cylindrical roller bearings, double row, NNUK |
| DIN 5412-4 NNUK | Cylindrical roller bearings, double row, NNUK (simplified model) |
| DIN 5415 | Adapter sleeves |
| DIN 5416 | Roller bearings, sleeves |
| DIN 5417 | Snap rings for rolling bearings |
| DIN 5419 | Felt rings for roller bearing case |
| DIN 5419 | Felt strips for roller bearing case |
| DIN 5429-1 NKX | Needle axial cylindrical bearings without protective cap |
| DIN 5429-1 NKX | Needle axial ball bearings without protective cap (simplified model) |
| DIN 5429-1 NKXR | Needle axial cylindrical bearings without protective cap |
| DIN 5429-1 NKXR | Needle-Axial cylinder roller bearings without protective cap (simplified model) |
| DIN 5429-1 NKXR-Z | Needle axial cylindrical bearings with protective cap |
| DIN 5429-1 NKXR-Z | Needle-axial cylinder roller bearings with protective cap (simplified model) |
| DIN 5429-1 NKX-Z | Needle axial cylindrical bearings with protective cap |
| DIN 5429-1 NKX-Z | Needle axial ball bearings with protective cap (simplified model) |
| DIN 5429-2 NKIA | Needle angular contact ball bearings |
| DIN 5429-2 NKIA | Needle angular contact ball bearings (simplified model) |
| DIN 546 | Slotted round nuts |
| DIN 547 | Round nuts with drilled holes in one face |
| DIN 548 | Round nuts with set pin holes inside |
| DIN 551 | Slotted set screws with flat point |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5518 A | Profiles, form A |
| DIN 5518 B | Profiles, form B |
| DIN 5518 C | Profiles, form C |
| DIN 5518 D | Profiles, form D |
| DIN 5518 E | Profiles, form E |
| DIN 5518 F | Profiles, form F |
| DIN 5518 G | Profiles, form G |
| DIN 5518 H | Profiles, form H |
| DIN 5518 J | Profiles, form J |
| DIN 5518 K | Profiles, form K |
| DIN 5518 L | Profiles, form L |
| DIN 5518 M | Profiles, form M |
| DIN 5518 N | Profiles, form N |
| DIN 5518 O | Profiles, form O |
| DIN 5518 P | Profiles, form P |
| DIN 5518 Q | Profiles, form Q |
| DIN 5518 R | Profiles, form R |
| DIN 5518 S | Profiles, form S |
| DIN 5518 T | Profiles, form T |
| DIN 5519 A | Bordering strips, form A |
| DIN 5519 B | Bordering strips, form B |
| DIN 5519 C | Bordering strips, form C |
| DIN 5519 D | Bordering strips, form D |
| DIN 5519 E | Bordering strips, form E |
| DIN 5519 F1 | Bordering strips, form F1 |
| DIN 5519 F2 | Bordering strips, form F2 |
| DIN 5525 A | Pins without head, form A (without locking hole) |
| DIN 5525 B | Pins without head, form B (without locking hole) |
| DIN 5526 A | Pins with head, form A (without locking hole) |
| DIN 5526 B | Pins with head, form B (without locking hole) |
| DIN 553 | Slottet set screws with cone point |
| DIN 5532 | Aluminium alloy pipe clips, single ended, with tightening for rail vehicles |
| DIN 5533 | Aluminium alloy pipe clips, double-ended, with tightening for rail vehicles |
| DIN 5534 | Aluminium alloy pipe clips, centrally fitted, for two pipes for rail vehicles |
| DIN 5543 A | Plate springs, spring plate |
| DIN 5543 B | Plate springs, spring plate |
| DIN 5543 C | Plate springs, spring plate |
| DIN 5543 D | Plate springs, spring plate |
| DIN 5543 E | Plate springs, spring plate |
| DIN 5543 F | Plate springs, spring plate |
| DIN 5545 1 | Swing-links, pos. No. 1 |
| DIN 5545 10 | Spring bolts, pos. No. 10 |
| DIN 5545 11 | Spring bolts, pos. No. 11 |
| DIN 5545 12 | Spring bolts, pos. No. 12 |
| DIN 5545 13 | Spring bolts, pos. No. 13 |
| DIN 5545 14 | Sealing pieces, pos. No. 14 |
| DIN 5545 15 | Sealing pieces, pos. No. 15 |
| DIN 5545 18 | Swing-links, pos. No. 18 |
| DIN 5545 19 | Swing-links, pos. No. 19 |
| DIN 5545 2 | Swing-links, pos. No. 2 |
| DIN 5545 20 | Spring bolts, pos. No. 20 |
| DIN 5545 3 | Swing-links, pos. No. 3 |
| DIN 5545 4 | Swing-links, pos. No. 4 |
| DIN 5545 5 | Swing-links, pos. No. 5 |
| DIN 5545 6 | Swing-link stones, pos. No. 6 |
| DIN 5545 7 | Swing-link stones, pos. No. 7 |
| DIN 5545 8 | Swing-link stones, pos. No. 8 |
| DIN 5545 9 | Adapters, pos. No. 9 |
| DIN 555 | Hexagon nuts |
| DIN 5557 AA | Handwheels |
| DIN 5557 C | Handwheels |
| DIN 557 | Square nuts |
| DIN 558 | Hexagon screws, thread proximate till head |
| DIN 5580 A | Pressure vessels made of aluminium alloys, form A |
| DIN 5580 B1 | Pressure vessels made of aluminium alloys, form B1 |
| DIN 5580 C1 | Pressure vessels made of aluminium alloys, form C1 |
| DIN 5580 D1 | Pressure vessels made of aluminium alloys, form D1 |
| DIN 5586 A | Locking screws with collar and vent, form A |
| DIN 5586 B | Locking screws with collar and vent, form B |
| DIN 5588-1 | Flangeable compressed air devices |
| DIN 5588-1 | O-rings |
| DIN 5588-1 D | Gasket rings |
| DIN 5590 A | Pressure vessels made of steel, form A |
| DIN 5590 A-UIC | Pressure vessels made of steel, form A-UIC |
| DIN 5590 C | Pressure vessels made of steel, form C |
| DIN 5590 C-UIC | Pressure vessels made of steel, form C-UIC |
| DIN 5590 D | Pressure vessels made of steel, form D |
| DIN 5590 E | Pressure vessels made of steel, form E |
| DIN 5590 F | Pressure vessels made of steel, form F |
| DIN 561 | Hexagon head set screws with small hexagon and dog point, form ZA |
| DIN 562 | Square thin nuts |
| DIN 56297 A | Quick links with union nut, form A, with a small opening |
| DIN 56297 B | Quick links with union nut, form B, with a largel opening |
| DIN 564 | Hexagon set screws with half dog point |
| DIN 5684-1 | Round steel link chains for lifting purposes, grade 5 |
| DIN 5684-2 | Round steel link chains for lifting purposes, grade 6 |
| DIN 5684-3 | Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| DIN 5685-1 G | Round steel chains without pressure testing, long limbs, form G |
| DIN 5685-2 G | Round steel link chains non proof loaded - Part 2: Semi long link, form G |
| DIN 5685-3 | Round steel link chains non proof loaded - Part 3: Short link |
| DIN 5686 | Double chains |
| DIN 5687-1 | Round steel link chains - Part 1: Grade 5, medium tolerance, tested |
| DIN 5688-1 A | Chain slings with hooks or end links, grade 5, form A |
| DIN 5688-1 B | Chain slings with hooks or end links, grade 5, form B |
| DIN 5688-1 H1 | Chain slings with hooks or end links, grade 5, form H1 |
| DIN 5688-1 H2 | Chain slings with hooks or end links, grade 5, form H2 |
| DIN 5688-1 H3 | Chain slings with hooks or end links, grade 5, form H3 |
| DIN 5688-1 H4 | Chain slings with hooks or end links, grade 5, form H4 |
| DIN 5688-1 R1 | Chain slings with hooks or end links, grade 5, form R1 |
| DIN 5688-1 R2 | Chain slings with hooks or end links, grade 5, form R2 |
| DIN 5688-1 R3 | Chain slings with hooks or end links, grade 5, form R3 |
| DIN 5688-1 R4 | Chain slings with hooks or end links, grade 5, form R4 |
| DIN 5688-3 A | Chain slings - Part 3: Links, grade 8, form A |
| DIN 5688-3 B | Chain slings - Part 3: Links, grade 8, form B |
| DIN 5688-3 G | Chain slings - Part 3: Master link assemblies, grade 8, form G |
| DIN 571 | Hexagon wood screws |
| DIN 580 | Ring bolts |
| DIN 582 | Lifting eye nuts |
| DIN 5902 | Fishplates for grooveless flat bottom rails |
| DIN 59051 | Hot-rolled sharp-edged T-bars |
| DIN 59200 | Hot-rolled wide flats |
| DIN 59220 | Hot-rolled sheet metal with patterns |
| DIN 59350 | Precision flats steel |
| DIN 59350 | Precision squares |
| DIN 59370 | Bright steel sharp-edged equal leg angles |
| DIN 59370 | Bright steel sharp-edged unequal leg angles |
| DIN 59382 | Cold rolled bands and sheets, rust-resistant steels |
| DIN 59410 | Hot formed square and rectangular steel tubes |
| DIN 59411 | Cold formed welded square and rectangular steel tubes |
| DIN 59413 C | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form C |
| DIN 59413 Hut | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form Hut |
| DIN 59413 L | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form L |
| DIN 59413 U | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form U |
| DIN 59413 Z | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form Z |
| DIN 59605 W2 | Embossed sheet of wrought aluminium alloys, form W2 |
| DIN 59605 W5 | Embossed sheet of wrought aluminium alloys, form W5 |
| DIN 59740 | Blank sheets or metal strip of nickel and nickel forgeable alloy hot-rolled |
| DIN 59745 | Blank sheets or metal strip of nickel and nickel forgeable alloy cold-rolled |
| DIN 59755 | Tubes of wrought nickel and nickel alloy, cold worked |
| DIN 59760 | Round rods of nickel and nickel forging alloy, hot roles |
| DIN 59761 | Square rods of nickel and nickel forging alloy, hot rolled |
| DIN 59762 | Hexagonal bars of wrought nickel and nickel alloys |
| DIN 59763 | Rectangle rods of nickel and nickel forging alloy, hot rolled |
| DIN 59765 | Round rods of nickel and nickel forging alloy, pulled |
| DIN 59767 | Hexagonal rods of nickel and nickel forging alloy, pulled |
| DIN 59768 | Rectangle rods of nickel and nickel forging alloy, pulled, with sharp edges |
| DIN 59781 | Round wire of wrought nickel and nickel alloy |
DIN6X
| DIN 601 | Hexagon bolts, without hexagon nut |
| DIN 601 Mu | Hexagon bolts, with hexagon nut DIN 555 |
| DIN 603 | Cup head square neck bolts |
| DIN 603 Mu | Cup head square neck bolts, with hexagon nut |
| DIN 604 | Flat countersunk nib bolts |
| DIN 604 Mu | Flat countersunk nib bolts, with hexagon nut DIN 555 |
| DIN 605 | Flat countersunk square neck bolts (with long square) |
| DIN 605 Mu | Flat countersunk square neck bolts (with long square), with hexagon nut DIN 555 |
| DIN 607 | Cup head nib bolts |
| DIN 607 Mu | Cup head nib bolts, with hexagon nut DIN 555 |
| DIN 608 | Flat countersunk square neck bolts |
| DIN 608 Mu | Flat countersunk square neck bolts, with hexagon nut DIN 555 |
| DIN 609 | Hexagon fits bolts with long thread |
| DIN 610 | Hexagon fitting bolts with short threaded portion |
| DIN 615 | Magneto bearing |
| DIN 615 | Magneto bearing |
| DIN 617 NA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings with inner ring |
| DIN 617 NA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings with inner ring (simplified model) |
| DIN 617 NA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings with inner ring |
| DIN 617 NA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings with inner ring (simplified model) |
| DIN 617 NA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings with inner ring |
| DIN 617 NA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings with inner ring (simplified model) |
| DIN 617 NA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings with inner ring (simplified model) |
| DIN 617 RNA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings without inner ring |
| DIN 617 RNA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings without inner ring (simplified model) |
| DIN 617 RNA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings without inner ring |
| DIN 617 RNA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings without inner ring (simplified model) |
| DIN 617 RNA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings without inner ring |
| DIN 618 BK | Needle roller bearings, drawn cups with closed ends with cage, sealed |
| DIN 618 BK | Needle roller bearings, drawn cups with closed ends with cage, sealed (simplified model) |
| DIN 618 HK | Needle roller bearings with cage, sealed |
| DIN 618 HK | Needle roller bearings, drawn cups with open ends with cage, sealed |
| DIN 618 HK | Needle roller bearings with cage, sealed (simplified model) |
| DIN 618 HK | Needle roller bearings, drawn cups with open ends with cage, sealed (simplified model) |
| DIN 625-1 | Radial deep groove ball bearings, single row |
| DIN 625-1 | Radial deep groove ball bearings, single row (simplified model) |
| DIN 625-1 N | Radial deep groove ball bearings, single row (simplified model) |
| DIN 625-3 | Radial deep groove ball bearings, double row |
| DIN 625-3 | Radial deep groove ball bearings, double row (simplified model) |
| DIN 625-4 | Rolling bearings, radial deep groove ball bearings, with flanged outer ring |
| DIN 625-4 | Rolling bearings, radial deep groove ball bearings, with flanged outer ring (simplified model) |
| DIN 626-1 YEL | Insert bearing |
| DIN 626-1 YEL | Insert bearing |
| DIN 626-1 YEN | Insert bearing |
| DIN 626-1 YEN | Insert bearing |
| DIN 628-1 | Angular contact radial ball bearings, single row |
| DIN 628-1 | Angular contact radial ball bearings, single row (simplified model) |
| DIN 628-3 | Angular contact radial ball bearings, double row, with cage |
| DIN 628-3 | Angular contact radial ball bearings, double row (simplified model) |
| DIN 628-4 | Radial-Schraegkugellager, einreihig, nicht selbsthaltend, Vierpunktlager, mit geteiltem Innenring |
| DIN 628-4 | Radial-Schraegkugellager, einreihig, nicht selbsthaltend, Vierpunktlager, mit geteiltem Innenring |
| DIN 628-5 | Angular contact radial ball bearings, double row, with spacer balls |
| DIN 628-5 | Angular contact radial ball bearings, double row, with spacer balls (simplified model) |
| DIN 628-6 | Rolling bearings, angular contact radial ball bearings, single row, conctact angle 15° and 25° |
| DIN 630 | Self aligning ball bearings, double row, cylindrical bore |
| DIN 630 | Angular self aligning ball bearings, double row (simplified model) |
| DIN 630 2RS | Self aligning ball bearings, double row, cylindrical bore |
| DIN 630 K | Self aligning ball bearings, double row, conus bore (1:12) |
| DIN 630 K | Self aligning ball bearings, double row, conus bore (1:12) (simplified model) |
| DIN 630 K-2RS | Self aligning ball bearings, double row, conus bore (1:12) |
| DIN 6303 A | Knurled nuts, form A |
| DIN 6303 B | Knurled nuts, form B |
| DIN 6304 E | Tommy screw with fixed clamping bolt, form E |
| DIN 6304 F | Tommy screw with fixed clamping bolt, form F |
| DIN 6305 | Tommy nuts with fixed clamping bolt |
| DIN 6306 D | Tommy screws with moveable clamping bolt, form D |
| DIN 6306 E | Tommy screws with moveable clamping bolt, with pressure peace, form E |
| DIN 6307 | Tommy nuts with movable clamping bolt |
| DIN 6310 | Side view pressure spring for drill fixture |
| DIN 6311 S | Thrust pads, form S |
| DIN 6314 | Clamp, straight |
| DIN 6315 B | Clamp forked, form B |
| DIN 6315 C | Clamp forked-with round rudiment, form C |
| DIN 6316 | Goose neck clamp |
| DIN 6318 | Stepped packing blocks as support for clamps |
| DIN 6319 C | Spherical washers, form C |
| DIN 6319 D | Conical seats, form D |
| DIN 6319 G | Conical seats, form G |
| DIN 6320 | Feet with threaded shank |
| DIN 6321 A | Location pins, form A |
| DIN 6321 B | Location pins cylindric, form B |
| DIN 6321 C | Location pins flattened, form C |
| DIN 6323 A | Slot stones loose, form A |
| DIN 6323 B | Slot stones loose, form B |
| DIN 6323 C | Slot stones loose, form C |
| DIN 6325 | Parallel pins, hardened, tolerance zone m6 |
| DIN 6326 A | Stepped settings up blocks, form A |
| DIN 6326 B | Stepped settings up blocks, form B |
| DIN 6326 C | Stepped settings up blocks, form C |
| DIN 6326 G | Stepped settings up blocks, form G |
| DIN 6326 K | Stepped settings up blocks, form K |
| DIN 6327-1 D | Adjustable adaptors for tools short build |
| DIN 6327-1 E | Adjustable adaptors for tools short build with sinking and bore |
| DIN 6327-2 F | Adjustable adaptors for tools long build |
| DIN 6327-2 G | Adjustable adaptors for tools long build with sinking and bore |
| DIN 6327-3 H | Adjustable adaptors with tools groove, deduced build |
| DIN 6327-4 | Adjustable adaptors for tools groove nut and clamp nut |
| DIN 6328-1 A | Taper chucks for parallel shank for tools with DIN-driving squares |
| DIN 6328-2 B | Taper chucks for parallel shank for tools with DIN-driving squares |
| DIN 6328-3 C | Taper chucks for parallel shank for tools with DIN-driving squares |
| DIN 6329 | Sockets for parallel shank tools with driving tenons |
| DIN 6330 B | Hexagon nuts, 1.5d height |
| DIN 6331 | Hexagon nuts, 1.5d height, with collar |
| DIN 6332 IS | Grub screws with thrust point, form IS |
| DIN 6332 S | Grub screws with thrust point, form S |
| DIN 6334 | Hexagon extension nuts |
| DIN 6335 A | Cross handles, form A |
| DIN 6335 B | Cross handles, form B |
| DIN 6335 C | Cross handles, form C |
| DIN 6335 D | Cross handles, form D with continuous threaded hole |
| DIN 6335 D | Cross handles, form D with inserted threaded bushes, variant A |
| DIN 6335 D B | Cross handles, form D with inserted threaded bushes, variant B |
| DIN 6335 E | Cross handles, form E |
| DIN 6335 G | Cross handles, form G |
| DIN 6335 H | Cross handles, form H |
| DIN 6335 K | Cross handles, molds made of molding compound, form K with inserted threaded bushes, variant A |
| DIN 6335 K B | Cross handles, molds made of molding compound, form K with inserted threaded bushes, variant B |
| DIN 6335 L | Cross handles, form L |
| DIN 6336 A | Star wheels |
| DIN 6336 B | Star wheels |
| DIN 6336 C | Star wheels |
| DIN 6336 D | Star wheels |
| DIN 6336 E | Star wheels |
| DIN 6336 K | Star wheels |
| DIN 6336 L | Star wheels |
| DIN 6337 K | Orb handles |
| DIN 6337 L | Orb handles |
| DIN 6337 M | Orb handles |
| DIN 6337 N | Orb handles |
| DIN 6340 | Washers for clamping devices |
| DIN 6341-1 | Tapered sleeves for collets |
| DIN 6341-1 K | Draw-in collets, form K short collets |
| DIN 6341-1 L | Draw-in collets, form L long collets |
| DIN 6343 | Collets - dead length type |
| DIN 6344 A | Feed fingers, form A for internal feed |
| DIN 6344 B | Feed fingers, form B for external feed |
| DIN 635-1 | Self aligning roller bearings, single row |
| DIN 635-1 | Self aligning roller bearings, single row (simplified model) |
| DIN 635-1 K | Self aligning roller bearings, single row |
| DIN 635-1 K | Self aligning roller bearings, single row (simplified model) |
| DIN 635-2 | Radial spherical roller bearings - Part 2: Double row with cylindrical bore |
| DIN 635-2 | Radial spherical roller bearings - Part 2: Double row with cylindrical bore (simplified model) |
| DIN 635-2 K | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:12) |
| DIN 635-2 K | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:12) (simplified model) |
| DIN 635-2 K30 | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:30) |
| DIN 635-2 K30 | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:30) (simplified model) |
| DIN 6354 A | Milling machine arbors with step taper, form A |
| DIN 6354 B | Milling machine arbors with step taper, form B |
| DIN 6355 | Milling machine arbors with steep taper |
| DIN 6356 | Centering arbors for milling cutters |
| DIN 6357 | Holding arbors for milling eutters |
| DIN 6359 | Reduction sleeves wit 7/24 taper for parallel shanks with driving surface |
| DIN 6360 | Milling machine arbors with steep taper for shell end mills with longitudinal driving slot |
| DIN 6361 | Milling machine arbors with steep taper for shell end mills with clutch drive |
| DIN 6363 | Reduction sleeves for tools with 7:24 taper shanks |
| DIN 6364 | Reduction sleeves with external 7/24 taper for morse taper shank with tightening thread |
| DIN 6366-1 | Clutch drive rings for shell mill arbors |
| DIN 6366-2 W | Clutch drive rings for shell hob arbors, form W |
| DIN 6367 | Cutter retaining screws for milling machine arbors |
| DIN 6368 | Spanners for shell end mill arbors |
| DIN 6371 | Captive C-washers for apparatuses |
| DIN 6372 | Pre plug washers for gadget |
| DIN 6374 | Grinding machine mandrels |
| DIN 6379 | Studs for use with tee nuts |
| DIN 6385 A | Short boring bars with taper 7/24, form A for radial tool holder |
| DIN 6385 B | Short boring bars with taper 7/24, form B for oblique tool holder |
| DIN 6385 C | Short boring bars with taper 7/24, form C for radial and oblique tool holder |
| DIN 6434 | Rivet set |
| DIN 6438 | Tinners snips |
| DIN 6438 L | Tinners snips, form L curved (hole cutter) |
| DIN 6450 C | Pin punches, form C |
| DIN 6450 D | Pin punches, form D |
| DIN 6451 | Cape chisel |
| DIN 6453 | Flat chisel |
| DIN 648 C | Spherical bearing |
| DIN 648 E | Spherical bearing |
| DIN 648 EW | Spherical bearing |
| DIN 648 G | Spherical bearing |
| DIN 648 K | Spherical bearing |
| DIN 649 | T-slots for T-head bolts |
| DIN 6499 A | Collets with 8° setting angle for tool shanks, form A |
| DIN 6499 B | Collets with 8° setting angle for tool shanks, form B |
| DIN 6499 C | Collet holders |
| DIN 6499 D | Nuts |
| DIN 650 | T-slots |
| DIN 6513-1 | Concav corner rounding cutters |
| DIN 65167 | Plug-in relays; DC 28 V, two-and four pole; 5 Amp; polarized, monostable |
| DIN 6518-1 A | Corner-rounding cutters with parallel shank, form A |
| DIN 6518-1 B | Corner-rounding cutters with parallel shank, form B |
| DIN 6518-1 D | Corner-rounding cutters with parallel shank, form D |
| DIN 6518-1 E | Corner-rounding cutters with parallel shank, form E |
| DIN 65187 A | Inserts for composite materials, form A |
| DIN 65187 B | Inserts for composite materials, form B |
| DIN 65188 | Inserts for composite materials |
| DIN 65191 | Inserts for composit materials |
| DIN 65202 | Aerospace series - Elastomeric O-rings |
| DIN 65246 | Nuts, hexagon, slitted/castellated, with MJ-thread, self-locking, in steel, classification: 1100MPa/120° |
| DIN 65247 | Thin castle nuts with MJ thread of corrosion resistant steel |
| DIN 65265 | Hexagon bolts with MJ thread |
| DIN 65267 | Hexagon bolts with MJ thread |
| DIN 65268 | Hexagon bolts with MJ thread |
| DIN 6527 A | Solid hardmetal end mills with stepped parallel shank, form A |
| DIN 6527 B | Solid hardmetal end mills with stepped parallel shank, form B |
| DIN 6527 C | Solid hardmetal end mills with stepped parallel shank, form C |
| DIN 6528 | Solid hardmetal end mills with continuous parallel shank |
| DIN 653 | Knurled thumb screws, thin type |
| DIN 65306 A | Inserts for composite materials, form A |
| DIN 65306 B | Inserts for composite materials, form B |
| DIN 65307 | Inserts for composite materials |
| DIN 6537 A | Solid-hardmetal twist drills with stepped parallel shank, form A |
| DIN 6537 B | Solid-hardmetal twist drills with stepped parallel shank, form B |
| DIN 6537 C | Solid-hardmetal twist drills with stepped parallel shank, form C |
| DIN 65379 | Countersunk rivets 100° |
| DIN 6538-1 A | Twist drills with hardmetall cutting edges with reinforced parallel shank, form A |
| DIN 6538-1 B | Twist drills with hardmetall cutting edges with reinforced parallel shank, form B |
| DIN 6539 | Solid-hardmetal twist drills with continuous parallel shank |
| DIN 65399 | Countersunk rivets 100° |
| DIN 65433 A | Sleeves, wall thickness 0.25 mm, for fasteners with reduced countersunk head, form A |
| DIN 65433 B | Sleeves, wall thickness 0.25 mm, for fasteners with reduced countersunk head, form B |
| DIN 65434 A | Sleeves, form A |
| DIN 65434 B | Sleeves, form B |
| DIN 65438 | Bihexagonal head bolts, close tolerance, with MJ thread, short thread length, in titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315°C |
| DIN 65457 | Thimbles of sheet steel |
| DIN 65471 | Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires |
| DIN 65480 | Nuts, self locking hexagon, with MJ-thread |
| DIN 65506 | Anchor nuts with MJ-thread |
| DIN 65522 | Hexagon bolts with MJ thread |
| DIN 65523 | Hexagon bolts with MJ thread |
| DIN 65525 | Bolts, hexagon, close tolerance, with MJ thread, short thread, steel, nominal strength 1100 MPa, for temperatures up to 235°C |
| DIN 65545 | Hexagon nuts with MJ thread |
| DIN 65547 P | Rivets with universal head, of titanium base alloy, metric series, form P |
| DIN 65547 S | Rivets with universal head, of titanium base alloy, metric series, form S |
| DIN 65548 P | Rivets with counter sunk 100°, titan alloy, metric row, form P |
| DIN 65548 S | Rivets with counter sunk 100°, titan alloy, metric row, form S |
| DIN 65550 | Flanged collars |
| DIN 65552 | Blind rivets with 100° countersunk head, corrosion-resisting steel, with mandrel |
| DIN 659 | Tee handled socket wrenches, tubular single end |
| DIN 6590 SECN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SECN |
| DIN 6590 SNAN ANN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNAN ANN |
| DIN 6590 SNAN ENN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNAN ENN |
| DIN 6590 SNCN ANN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNCN ANN |
| DIN 6590 SNCN ENN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNCN ENN |
| DIN 6590 SNKN ANN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNKN ANN |
| DIN 6590 SNKN ENN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNKN ENN |
| DIN 6590 SPAN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SPAN |
| DIN 6590 SPCN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SPCN |
| DIN 6590 SPKN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SPKN |
| DIN 6590 TECN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TECN |
| DIN 6590 TPAN PD | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPAN PD |
| DIN 6590 TPAN PP | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPAN PP |
| DIN 6590 TPCN PD | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPCN PD |
| DIN 6590 TPCN PP | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPCN PP |
| DIN 6590 TPKN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPKN |
| DIN 660 | Half-round-rivet, nominal diameters 1 to 8 mm, form A/B |
| DIN 661 | Countersunk-head rivets nominal diameter 1 to 8 mm, form A/B |
| DIN 662 | Filister rivets, nominal diameter 1.6 to 6 mm |
| DIN 662 | Filister rivets, nominal diameter 1.6 to 6 mm, form A/B |
| DIN 668 | Round steel |
| DIN 669 | Round steel shafts |
| DIN 670 | Round steel |
| DIN 671 | Round steel |
| DIN 674 | Snap head rivets, nominal diameter 1.4 to 6 mm |
| DIN 674 | Snap head rivets, nominal diameter 1.4 to 6 mm, form A/B |
| DIN 675 | Flat countersunk head rivets, nominal diameters 3 to 5 mm |
| DIN 6791 | Semi-tubular pan head rivets, nominal diameters 1.6 to 10 mm |
| DIN 6792 | Halbhohlniete mit Senkkopf, Nenndurchmesser 1.6 bis 10 mm, (geschlossen) |
| DIN 6792 OFFEN | Semi-tubular rivets with counter sunk, nominal diameter 1.6 to 10 mm (open) |
| DIN 6796 | Conical spring washers for bolted connections |
| DIN 6797 A | Tooth lock washers, form A |
| DIN 6797 J | Tooth lock washers, form J |
| DIN 6797 V | Tooth lock washers, form V |
| DIN 6798 A | Serrated lock washers, form A |
| DIN 6798 J | Serrated lock washers, form J |
| DIN 6798 V | Serrated lock washers, form V |
| DIN 6799 | Retaining washers for shafts |
| DIN 68163 A | Fasteners for assembling timber pallets, nails, form A |
| DIN 68163 K | Fasteners for assembling timber pallets, nails, form K |
| DIN 68705-2 | Plywood |
| DIN 68705-3 | Plywoods; building-veneer plywoods |
| DIN 68705-4 | Plywoods; core-plywoods for buildings purposes |
| DIN 68705-5 | Plywoods, veneer plywoods made of beech for building purposes |
| DIN 6880 | Bright key steels |
| DIN 6881 | Hollow wedges |
| DIN 6883 | Flat wedges |
| DIN 6884 | Stressed type fastening with taper action |
| DIN 6885-1 A | Parallel keys, deep pattern |
| DIN 6885-1 AB | Parallel keys, deep pattern |
| DIN 6885-1 ABS | Parallel keys, deep pattern |
| DIN 6885-1 AS | Parallel keys, deep pattern |
| DIN 6885-1 B | Parallel keys, deep pattern |
| DIN 6885-1 BS | Parallel keys, deep pattern |
| DIN 6885-1 C | Parallel keys, deep pattern |
| DIN 6885-1 CD | Parallel keys, deep pattern |
| DIN 6885-1 D | Parallel keys, deep pattern |
| DIN 6885-1 DS | Parallel keys, deep pattern |
| DIN 6885-1 E | Parallel keys, deep pattern |
| DIN 6885-1 EF | Parallel keys, deep pattern |
| DIN 6885-1 EoS | Parallel keys, deep pattern |
| DIN 6885-1 F | Parallel keys, deep pattern |
| DIN 6885-1 FoS | Parallel keys, deep pattern |
| DIN 6885-1 G | Parallel keys, deep pattern |
| DIN 6885-1 H | Parallel keys, deep pattern |
| DIN 6885-1 J | Parallel keys, deep pattern |
| DIN 6885-2 A | Parallel keys, deep pattern for machine tool |
| DIN 6885-2 C | Parallel keys, deep pattern for machine tool |
| DIN 6885-2 E | Parallel keys, deep pattern for machine tool |
| DIN 6885-2 EoS | Parallel keys, deep pattern for machine tool |
| DIN 6885-3 A | Parallel keys, low pattern |
| DIN 6885-3 B | Parallel keys, low pattern |
| DIN 6885-3 C | Parallel keys, low pattern |
| DIN 6885-3 E | Parallel keys, low pattern |
| DIN 6885-3 EoS | Parallel keys, low pattern |
| DIN 6886 A | Wedges, form A |
| DIN 6886 B | Wedges, form B |
| DIN 6887 | Wedges with nose |
| DIN 6888 | Spring washers |
| DIN 6889 | Hollow wedges with nose |
| DIN 6899 BF | Shaped steel thimbles for wire ropes, type N |
| DIN 6902 A | Washers for screws and washers assemblies, form A |
| DIN 6902 B | Washers for screws and washers assemblies, form B |
| DIN 6902 C | Washers for screws and washers assemblies, form C |
| DIN 6903 A | Washers for tapping screw and washer assemblies, form A |
| DIN 6903 B | Washers for tapping screw and washer assemblies, form B |
| DIN 6904 | Curved spring washers for screw and washer assemblies |
| DIN 6905 | Spring washers for screw and washer assemblies |
| DIN 6907 | Serrated lock washers external teeth for screw and washer assemblies |
| DIN 6908 | Conical spring washers for screws and washers assemblies |
| DIN 6911 | Hexagon socket screw keys with pilot |
| DIN 6912 | Hexagon socket head cap screws with reduced loadability, low head, with centre |
| DIN 6914 | Hexagon screws with large widths across flats |
| DIN 6915 | Hexagon nuts with large widths across flats |
| DIN 6916 | Round washers for high-tensile structural bolting |
| DIN 6917 | Square taper washers for I-sections for high-tensile structural bolting |
| DIN 6918 | Square taper washers for U-sections for high-tensile structural bolting |
| DIN 6921 | Hexagon bolts with flange |
| DIN 6922 | Hexagon flange bolts with reduced shank |
| DIN 6923 | Hexagon nuts with flange |
| DIN 6924 | Prevailing torque type hexagon nuts, non-metallic insert |
| DIN 6925 | Prevailing torque type hexagon nuts, all metal nuts |
| DIN 6926 | Prevailing torque type hexagon flange nuts, non-metallic insert |
| DIN 6927 | Prevailing torque type hexagon flange nuts, all metal nuts |
| DIN 6928 C | Hexagon head sheet metal tapping screws with collar, form C |
| DIN 6928 F | Sechskant-Blechschrauben mit Bund, Form F |
| DIN 6929 KCE-H | Screws with coarse thread and reduced shank for captive applications, form KCE-H |
| DIN 6929 KCE-Z | Screws with coarse thread and reduced shank for captive applications, form KCE-Z |
| DIN 6929 KDE | Screws with coarse thread and reduced shank for captive applications, form KDE |
| DIN 6929 KEE | Screws with coarse thread and reduced shank for captive applications, form KEE |
| DIN 6929 KNE-H | Screws with coarse thread and reduced shank for captive applications, form KNE-H |
| DIN 6929 KNE-Z | Screws with coarse thread and reduced shank for captive applications, form KNE-Z |
| DIN 6929 KOE | Screws with coarse thread and reduced shank for captive applications, form KOE |
| DIN 6929 KPE | Screws with coarse thread and reduced shank for captive applications, form KPE |
| DIN 6929 KQE | Screws with coarse thread and reduced shank for captive applications, form KQE |
| DIN 6929 LCE-H | Screws with coarse thread and reduced shank for captive applications, form LCE-H |
| DIN 6929 LCE-Z | Screws with coarse thread and reduced shank for captive applications, form LCE-Z |
| DIN 6929 LDE | Screws with coarse thread and reduced shank for captive applications, form LDE |
| DIN 6929 LEE | Screws with coarse thread and reduced shank for captive applications, form LEE |
| DIN 6929 LNE-H | Screws with coarse thread and reduced shank for captive applications, form LNE-H |
| DIN 6929 LNE-Z | Screws with coarse thread and reduced shank for captive applications, form LNE-Z |
| DIN 6929 LOE | Screws with coarse thread and reduced shank for captive applications, form LOE |
| DIN 6929 LPE | Screws with coarse thread and reduced shank for captive applications, form LPE |
| DIN 6929 LQE | Screws with coarse thread and reduced shank for captive applications, form LQE |
| DIN 695 A | Chain slings with hooks or end links, grade 2, form A |
| DIN 695 B | Chain slings with hooks or end links, grade 2, form B |
| DIN 695 H1 | Chain slings with hooks or end links, grade 2, form H1 |
| DIN 695 H2 | Chain slings with hooks or end links, grade 2, form H2 |
| DIN 695 H3 | Chain slings with hooks or end links, grade 2, form H3 |
| DIN 695 H4 | Chain slings with hooks or end links, grade 2, form H4 |
| DIN 695 R1 | Chain slings with hooks or end links, grade 2, form R1 |
| DIN 695 R2 | Chain slings with hooks or end links, grade 2, form R2 |
| DIN 695 R3 | Chain slings with hooks or end links, grade 2, form R3 |
| DIN 695 R4 | Chain slings with hooks or end links, grade 2, form R4 |
| DIN 69844-1 A | ANS-end mills with parallel shank, form A |
| DIN 69844-1 B | ANS-end mills with parallel shank, form B |
| DIN 69844-1 D | ANS-end mills with parallel shank, form D |
| DIN 69844-1 E | ANS-end mills with parallel shank, form E |
| DIN 69880-1 | Tool holders with parallel shank |
| DIN 69880-3 B1 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B1 right, short |
| DIN 69880-3 B2 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B2 left, short |
| DIN 69880-3 B3 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B3 overhead, right, short |
| DIN 69880-3 B4 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B3 overhead, left, short |
| DIN 69880-3 B5 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B5 right, long |
| DIN 69880-3 B6 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B6 left, long |
| DIN 69880-3 B7 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B7 overhead, right, long |
| DIN 69880-3 B8 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B6 overhead, left, long |
| DIN 69880-6 E1 | Tool holders with parallel shank: Type E with cylindrical seat, form E1 for drilling tools with internal coolant feed |
| DIN 69880-6 E2 | Tool holders with parallel shank: Type E with cylindrical seat, form E2 for turning tools with cylindrical |
DIN7X
| DIN 7 | Parallel pins |
| DIN 703 | Adjusting rings |
| DIN 705 A | Adjusting rings, form A |
| DIN 705 B | Adjusting rings, form B |
| DIN 705 C | Adjusting rings, form C |
| DIN 70615 | Hexagon nuts with small widths across flats |
| DIN 7080 | Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature |
| DIN 70851 | Groove nuts |
| DIN 70852 | Groove nuts |
| DIN 70951 | Snap rings for slotted nuts to DIN 70851 |
| DIN 70952 A | Locking plates for groove nuts according to DIN 70852, form A |
| DIN 70952 B | Locking plates for groove nuts according to DIN 70852, form B |
| DIN 711 (eS) | Thrust ball bearings, single direction, slick case washer |
| DIN 711 (eS) | Thrust ball bearings, double dicrection (simplified model) |
| DIN 711 (kS) | Thrust ball bearings, single direction, round case washer |
| DIN 71401-1 | Drain cocks for internal combustion engines (not for new constructions), form A |
| DIN 71401-2 C | Drain valves for internal combustion engines |
| DIN 71412 A | Lubricating nipples; cone type, form A |
| DIN 71412 B | Lubricating nipples; cone type, form B |
| DIN 71412 C | Lubricating nipples; cone type, form C |
| DIN 71428 | Cylindrical thread nipples for use with union nuts |
| DIN 71429 A | Bulkheads, form A |
| DIN 71429 B | Bulkheads, form B |
| DIN 71430 A | Swiveling fittings for use with union nuts, knees |
| DIN 71430 B | Swiveling fittings for use with union nuts, L-pieces |
| DIN 71430 C | Swiveling fittings for use with union nuts, T-pieces |
| DIN 71430 D | Swiveling fittings for use with union nuts, cross pieces |
| DIN 71433 A | T-pieces, form A |
| DIN 71433 B | T-pieces, form B |
| DIN 71433 C | Elbows, form C |
| DIN 715 | Thrust ball bearings, double dicrection |
| DIN 715 | Thrust ball bearings, double dicrection (simplified model) |
| DIN 715 (ks) | Bearings with crowned housing washers and washers |
| DIN 715 (ks) v | Bearings with crowned housing washers and washers |
| DIN 71501 A | Oval flanges for motor vehicles, form A |
| DIN 71501 AG | Oval flanges for motor vehicles, form AG |
| DIN 71501 B | Oval flanges for motor vehicles, form B |
| DIN 71501 BA | Oval flanges for motor vehicles, form BA |
| DIN 71501 BAG | Oval flanges for motor vehicles, form BAG |
| DIN 71501 BG | Oval flanges for motor vehicles, form BG |
| DIN 71511 | Gaskets for oval flanges |
| DIN 71555 | Motor vehicles – Pipe clips for exhaust systems |
| DIN 71752 G | Fork heads, form G |
| DIN 71802 A | Hinged joints with threaded pin and hexagonal nut without spanner flat, form A |
| DIN 71802 AS | Hinged joints with threaded pin and hexagonal nut and locking clip without spanner flat, form AS |
| DIN 71802 B | Hinged joints with rivet shank, form B |
| DIN 71802 BS | Hinged joints with rivet shank and locking clip, form BS |
| DIN 71802 C | Hinged joints with threaded pin and hexagonal nut with spanner flat, form C |
| DIN 71802 CS | Hinged joints with threaded pin and hexagonal nut and locking clip with spanner flat, form CS |
| DIN 71803 A | Ball studs, form A |
| DIN 71803 B | Ball studs, form B |
| DIN 71803 C | Ball studs, form C |
| DIN 71805 A | Ball cups, form A |
| DIN 71805 B | Ball cups, form B |
| DIN 71805 S | Circlips, form S |
| DIN 71984-2 B | Cables for controls; round strands 1x19, form B |
| DIN 71984-3 C | Cables for controls; sheatings, form C flat wire covers |
| DIN 71984-3 D | Cables for controls; sheatings, form D round wire covers |
| DIN 71984-4 E | Cables for controls; sockets, form E |
| DIN 71984-4 F | Cables for controls; sockets, form F |
| DIN 71984-4 G | Cables for controls; sockets, form G |
| DIN 71985-2 B | Nipples for linkages, solder nipple, form B |
| DIN 71985-2 C | Nipples for linkages, solder nipple, form C |
| DIN 71985-2 D | Nipples for linkages, solder nipple, form D |
| DIN 71989 A | Setscrews, form A |
| DIN 71989 B | Setscrews, form B |
| DIN 71989 C | Adjusting screws, form C, with knurled head without nut |
| DIN 71989 D | Setscrews, form D |
| DIN 720 | Tapered roller bearing |
| DIN 720 | Tapered roller bearing |
| DIN 722 | Thrust cylindrical roller bearings, single direction |
| DIN 722 | Thrust cylindrical roller bearings, single direction (simplified model) |
| DIN 72311-15 H4 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H4 (with robotic grips) |
| DIN 72311-15 H5 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H5 (with robotic grips) |
| DIN 72311-15 H6 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H6 (with robotic grips) |
| DIN 72311-15 H60 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H60 (without robotic grips) |
| DIN 72311-15 H7 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H7 (with robotic grips) |
| DIN 72311-15 H8 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H8 (with robotic grips) |
| DIN 72311-15 H80 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H80 (without robotic grips) |
| DIN 72311-15 T4 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T4 (with robotic grips) |
| DIN 72311-15 T5 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T5 (with robotic grips) |
| DIN 72311-15 T6 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T6 (with robotic grips) |
| DIN 72311-15 T60 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T60 (without robotic grips) |
| DIN 72311-15 T65 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T65 (with robotic grips) |
| DIN 72311-15 T7 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T7 (with robotic grips) |
| DIN 72311-15 T8 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T8 (with robotic grips) |
| DIN 72311-15 T80 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T80 (without robotic grips) |
| DIN 72331-1 | Battery terminal for starter battery, screw clamp form A-D |
| DIN 72331-2 | Battery terminal for starter battery, screw clamp form E-H |
| DIN 72332-1 A | Soldering clips form A for positive pole |
| DIN 72332-1 B | Soldering clips form B for negative pole |
| DIN 72332-2 C1 | Soldering clips form C1 for positive pole |
| DIN 72332-2 C2 | Soldering clips form C2 for positive pole |
| DIN 72332-2 D1 | Soldering clips form D1 for negative pole |
| DIN 72332-2 D2 | Soldering clips form D2 for negative pole |
| DIN 72333-3 | Tapered battery terminal post connector, ground braiding |
| DIN 72333-3 A1 | Tapered battery terminal post connector, ground strap, form A1 without end clamp |
| DIN 72333-3 A2 | Tapered battery terminal post connector, ground strap, form A2 with end clamp |
| DIN 72333-3 B1 | Tapered battery terminal post connector, ground strap, form B1 without end clamp |
| DIN 72333-3 B2 | Tapered battery terminal post connector, ground strap, form B2 with end clamp |
| DIN 72333-3 C1 | Tapered battery terminal post connector, ground strap, form C1 with cable socket |
| DIN 72333-3 C2 | Tapered battery terminal post connector, ground strap, form C1 with claw cable socket |
| DIN 72551-6 A | Low voltage circuit type A |
| DIN 72551-6 B | Low voltage circuit type B |
| DIN 72571 | Pipe clamps - One-sided fastening |
| DIN 72572 | Pipe clamps - Center fastening for 2 pipes |
| DIN 72573 | Pipe clamps - Two-sided fastening |
| DIN 72581-1 A | Fuses for small stress strain |
| DIN 72581-2 B | Fuses for small stress strain |
| DIN 72581-3 C | Fuses for small stress strain |
| DIN 72581-3 E | Fuses for small stress strain |
| DIN 72581-3 F | Fuses for small stress strain |
| DIN 72586 A | Line connectors, 2- to 7-pole for wire profile up to 10 mm² |
| DIN 72586 B | Line connectors, 12-pole for wire profile up to 6 mm² |
| DIN 72586 C | Line connectors, 12-pole with flat plugs |
| DIN 72601-3 E | Lamps for road motor vehicle single filament bulbs for headlamps |
| DIN 72601-3 Q | Lamps for road motor vehicle single filament bulbs for headlamps |
| DIN 72601-4 F | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-4 H | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-4 J | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-4 K | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-6 K | Lamps for road motor vehicles single filament lamps for signal lamps |
| DIN 72601-6 R | Lamps for road motor vehicles single filament lamps for signal lamps |
| DIN 72601-6 U | Lamps for road motor vehicles single filament lamps for signal lamps |
| DIN 72601-9 | Motorcar lamps with socket W2 x 4,6d |
| DIN 728 | Single direction self-aligning thrust bearings with asymmetric rollers |
| DIN 728 | Single direction self-aligning thrust bearings with asymmetric rollers (simplified model) |
| DIN 73123 A | Snap rings for piston pins, form A |
| DIN 73123 B | Snap rings for piston pins, form B |
| DIN 73123 C | Snap rings for piston pins, form C |
| DIN 73125 D | Piston pins for spark-ignited engines, form D |
| DIN 73125 E | Piston pins for spark-ignited engines, form E |
| DIN 73130 A | Round wire snap rings for piston pins, form A |
| DIN 73130 C | Round wire snap rings for piston pins, form C |
| DIN 7331 A | Hollow rivets, two-parts, rivets, form A |
| DIN 7331 AN | Hollow rivets, rivet part, form AN |
| DIN 7331 B | Hollow rivets, two-parts, rivets, form B |
| DIN 7331 BN | Hollow rivets, rivet part, form BN |
| DIN 7331 K | Hollow rivets, head part, form K |
| DIN 7332 | Eyelets for canvas |
| DIN 7333 | Eyeletts for cardboard labels |
| DIN 73365-3 A | Injection Pumps for Diesel Engines, union nuts, form A |
| DIN 73365-3 B | Injection Pumps for Diesel Engines, pressure sleeves, form B |
| DIN 73365-3 C | Injection Pumps for Diesel Engines, sealing ferrules, form C |
| DIN 73365-3 D | Injection Pumps for Diesel Engines, soldered sealing ferrules, form D |
| DIN 73365-3 E | Injection Pumps for Diesel Engines, unions, form E |
| DIN 73365-3 L | Injection Pumps for Diesel Engines, pressure pipe connections, form L |
| DIN 73365-3 R | Injection Pumps for Diesel Engines, pressure pipe connections, form R |
| DIN 7337 A | Blind rivets with break mandrel, form A |
| DIN 7337 B | Blind rivets with break mandrel, form B |
| DIN 73378 | Polyamide tubing for motor vehicles |
| DIN 73379-1 TYPE 1 | Fuel hoses in tank |
| DIN 73379-1 TYPE 2 | Fuel hoses with medium permeation |
| DIN 73379-1 TYPE 3 | Fuel hoses with permeation |
| DIN 7338 A | Rivets for brake linings and clutch linings, form A |
| DIN 7338 B | Rivets for brake linings and clutch linings, form B |
| DIN 7338 C1 | Rivets for brake linings and clutch linings, form C1 |
| DIN 7338 C2 | Rivets for brake linings and clutch linings, form C2 |
| DIN 7339 | Tubular rivets (one piece) drawn from strip |
| DIN 7340 A | Tubular rivets, form A |
| DIN 7340 B | Tubular rivets, form B |
| DIN 73400 gasket | Bajonette-sealings, gaskets |
| DIN 73400 sealing cap | Bayonet-sealings, sealing caps |
| DIN 7341 A | Rivet pins, form A |
| DIN 7341 B | Rivet pins, form B |
| DIN 73411-2 | Hose elbow |
| DIN 7346 | Clamping pins |
| DIN 7349 | Washers for bolts with heavy type spring pins |
| DIN 7353 | Metal marking punches |
| DIN 7355 | Jacks |
| DIN 736 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 737 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 738 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 739 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 74053-1 50 A | Drawbar eyes 50, with sleeve, form A with welding end |
| DIN 74053-1 50 B | Drawbar eyes 50, with sleeve, form B with screw end |
| DIN 74053-1 50 D1 | Drawbar eyes 50, with sleeve, form D1 with 8-hole flange |
| DIN 74053-1 Sleeve 50 | Sleeves 50 |
| DIN 74054 40 B | Drawbar eyes 40, with sleeve, form B with screw end |
| DIN 74054-1 40 A | Drawbar eyes 40, with sleeve, form A with welding end |
| DIN 74054-1 40 D | Drawbar eyes 40, with sleeve, form D with 8 flange |
| DIN 74054-1 Sleeve 40 | Sleeves 40 |
| DIN 741 | Rope clamps for cable end connections |
| DIN 741 A | Rope clamps for cable end connections |
| DIN 741 B | Clips for free ends of wire ropes |
| DIN 7417 | Square socket keys |
| DIN 7422 | Bits with square drive for hexagon socket screws, hand operated |
| DIN 74225 | Brake hose clips |
| DIN 74233-1 ES | Fittings for brake pipes, male fittings for brake pipes, form ES |
| DIN 74233-1 FS | Fittings for brake pipes, male fittings for brake pipes, form FS |
| DIN 74233-2 EM | Fittings for brake pipes, union nuts for brake pipes, form EM |
| DIN 74233-2 FM | Fittings for brake pipes, union nuts for brake pipes, form FM |
| DIN 74234 | Brake pipes forms B, C or D with flare form E |
| DIN 74234 B | Brake pipes, form B |
| DIN 74234 C | Brake pipes, form C |
| DIN 74234 D | Brake pipes, form D |
| DIN 74234 E | Flares, form E |
| DIN 74234 F | Flares, form F |
| DIN 74304 A | Compression couplings, form A |
| DIN 74304 B | Compression couplings, form B |
| DIN 74304 C | Compression couplings, form C |
| DIN 74305-1 A | Hollow screws |
| DIN 74305-2 | Solderless tube fittings - Hexagon nuts (not for new construction) |
| DIN 74310-2 | Hoses |
| DIN 74313-1 A | Non-soldering compression fittings, reducers, form A |
| DIN 74313-1 B | Non-soldering compression fittings, reducers, form B |
| DIN 74313-2 C | Reducers, form C |
| DIN 74313-2 D | Reducers, form D |
| DIN 74315 A | Non soldering compression couplings, elbow bodies, form A |
| DIN 74315 B | Non soldering compression couplings, elbow bodies, form B |
| DIN 74315 C | Non soldering compression couplings, elbow bodies, form C |
| DIN 74324-1 R | Thermoplastic tubing |
| DIN 74361-2 A | Disc wheels for motor vehicles and trailers, form A |
| DIN 74361-2 B | Disc wheels for motor vehicles and trailers, form B |
| DIN 74361-2 C | Disc wheels for motor vehicles and trailers, form C |
| DIN 74361-2 D | Disc wheels for motor vehicles and trailers, form D |
| DIN 74361-2 E | Disc wheels for motor vehicles and trailers, form E |
| DIN 74361-2 F | Disc wheels for motor vehicles and trailers, form F |
| DIN 74361-2 G | Disc wheels for motor vehicles and trailers, fastening devices for bolt centering, orb collar bolt, form G |
| DIN 7444 | Slugging wrenches |
| DIN 7463 A1 | Sash fasteners with level contact surface, form A1 |
| DIN 7463 A2 | Sash fasteners with collar as contact surface, form A2 |
| DIN 7463 B | Catches with plugs, form B |
| DIN 7463 C | Catches angular with fastening holes to the screws or nuts, form C |
| DIN 7463 D | Catches angular without fastening holes to the weldings, form D |
| DIN 7463 E | River washers, form E |
| DIN 7463 F | Central pins without collar, form F |
| DIN 7463 G | Central pins with collar, form G |
| DIN 7465 A | Padlocks without connection eye, form A |
| DIN 7465 B | Padlocks without connection eye, form B |
| DIN 7465 C | Padlocks without connection eye, chain, arrester, form C |
| DIN 7465 D | Padlocks without connection eye, chain, split ring, form D |
| DIN 7500-1 AE | Thread rolling screws for metrical ISO thread, form AE |
| DIN 7500-1 BE | Thread rolling screws for metrical ISO thread, form BE |
| DIN 7500-1 CE-H | Thread rolling screws for metrical ISO thread, form CE |
| DIN 7500-1 CE-Z | Thread rolling screws for metrical ISO thread, form CE |
| DIN 7500-1 DE | Thread rolling screws for metrical ISO thread |
| DIN 7500-1 E | Thread rolling screws for metrical ISO thread, form E |
| DIN 7500-1 EE | Thread rolling screws for metrical ISO thread, form EE |
| DIN 7500-1 KE | Thread rolling screws for metrical ISO thread, form KE |
| DIN 7500-1 LE | Thread rolling screws for metrical ISO thread, form LE |
| DIN 7500-1 ME | Thread rolling screws for metrical ISO thread, form ME |
| DIN 7500-1 NE-H | Thread rolling screws for metrical ISO thread, form NE |
| DIN 7500-1 NE-Z | Thread rolling screws for metrical ISO thread, form NE |
| DIN 7500-1 OE | Thread rolling screws for metrical ISO thread, form OE |
| DIN 7500-1 PE | Thread rolling screws for metrical ISO thread, form PE |
| DIN 7500-1 QE | Thread rolling screws for metrical ISO thread, form QE |
| DIN 7504 K | Self-drilling screws with tapping screw thread, form K |
| DIN 7504 L | Self-drilling screws with tapping screw thread, form L |
| DIN 7504 M-H | Self-drilling screws with tapping screw thread, form M |
| DIN 7504 M-Z | Self-drilling screws with tapping screw thread, form M |
| DIN 7504 O-H | Self-drilling screws with tapping screw thread, form O |
| DIN 7504 O-Z | Self-drilling screws with tapping screw thread, form O |
| DIN 7504 R-H | Self-drilling screws with tapping screw thread, form R |
| DIN 7504 R-Z | Self-drilling screws with tapping screw thread, form R |
| DIN 7513 A | Thread - Self-tapping screws, form A |
| DIN 7513 BE | Thread - Self-tapping screws, form BE |
| DIN 7513 FE | Thread - Self-tapping screws, form FE |
| DIN 7513 GE | Thread - Self-tapping screws, form GE |
| DIN 7516 AE-H | Thread cutting screws recessed head, form AE |
| DIN 7516 AE-Z | Thread cutting screws recessed head, form AE |
| DIN 7516 DE-H | Thread cutting screws recessed head, form DE |
| DIN 7516 DE-Z | Thread cutting screws recessed head, form DE |
| DIN 7516 EE-H | Thread cutting screws recessed head, form EE |
| DIN 7516 EE-Z | Thread cutting screws recessed head, form EE |
| DIN 7527-1 E | Steel forgings, washers, forging quality E |
| DIN 7527-1 F | Steel forgings, washers, forging quality F |
| DIN 7527-2 E | Steel forgings, washers with hole, forging quality E |
| DIN 7527-2 F | Steel forgings, washers with hole, forging quality F |
| DIN 7527-3 E | Steel forgings, seamless rings, forging quality E |
| DIN 7527-3 F | Steel forgings, seamless rings, forging quality F |
| DIN 7527-5 G | Steel forgings, roles and welded rings |
| DIN 7527-6 A | Steel forgings, forged free form rod |
| DIN 7527-6 B | Steel forgings, forged free form, square rods |
| DIN 7527-6 C | Steel forgings, forged free form, hexagon rods |
| DIN 7527-6 D | Steel forgings, forged free form, octagon rods |
| DIN 7527-6 E | Steel forgings, forged free form, flat rods |
| DIN 7540 | Eye hooks, grade 5 |
| DIN 7541 | Large-eye hooks; grade 5 |
| DIN 7584 | Steel tube nozzles with external thread, flat sealing up to working pressure of 10 kp/cm2 |
| DIN 7584 E | Steel tube nozzles with external thread, flat sealing up to working pressure of 10 kp/cm2, form E |
| DIN 7584 ring | Steel tube nozzles with external thread, flat sealing up to working pressure of 10 kp/cm2, rings |
| DIN 7585 | Sleeves, flat sealing up to working pressure of 10 kp/cm2 |
| DIN 7585 ring | Sleeves, flat sealing up to working pressure of 10 kp/cm2, rings |
| DIN 7589 | Threaded coupling |
| DIN 7589 Ku | Boltings with flat seal, form Ku with copper tube nozzles |
| DIN 7589 S | Boltings with flat seal, form S with steel tube nozzles |
| DIN 7589 Sch | Boltings with flat seal, form Sch with sleeves |
| DIN 7592 | Copper tube nozzles up to working pressure of 10 bar |
| DIN 7592 E | Copper tube nozzles up to working pressure of 10 bar, form E |
| DIN 7592 Ring | Copper tube nozzles up to working pressure of 10 bar, rings |
| DIN 7603 A | Sealing rings, form A, flat gaskets |
| DIN 7603 C | Sealing rings, form C, fill gaskets |
| DIN 7603 D | Sealing rings, form D, convex gaskets |
| DIN 7604 A | Hexagon head screw plugs; light type, cylindrical thread, form A |
| DIN 7604 B | Hexagon head screw plugs; light type, cylindrical thread, form B |
| DIN 7604 C | Hexagon head screw plugs; light type, tapered thread, form C |
| DIN 7605 | Cap nuts |
| DIN 7612 | Connecting piece |
| DIN 762-1 | Round steel link chains - Chain strands from round steel link chains, nominal pitch: 5xd, for the operation in bucket elevators - part 1: Made from case hardened quality steel, Grade 2 |
| DIN 763 | Round steel link chains, tested. non calibrated, long link |
| DIN 7631 | Connectors |
| DIN 7632 A | Reducing adapters with parallel screwed-in ends |
| DIN 7633 | Soldered bush |
| DIN 7637 | Adapters for welding |
| DIN 7638 | Elbow couplings |
| DIN 7638 G | Elbow couplings, form G |
| DIN 7638 P | Elbow couplings, form P |
| DIN 7639 | T-couplings |
| DIN 7639 G | T-couplings, form G |
| DIN 7639 P | T-couplings, form P |
| DIN 7641 | Ring fittings for coupling nuts |
| DIN 7642 B | Ring type nipples for brazed connection, form B |
| DIN 7642 E | Ring type nipples for brazed connection, form E |
| DIN 7643 | Hollow screws for ring-type nipples |
| DIN 7644 | Hollow screw adapters |
| DIN 7647 A | Adaptors with parallel screwed-in ends, form A |
| DIN 766 | Round steel link chains, grade 3, calibrated, tested |
| DIN 771 A | High speed steel tips for turning and planing tools, form A |
| DIN 771 B | High speed steel tips for turning and planing tools, form B |
| DIN 771 C | High speed steel tips for turning and planing tools, form C |
| DIN 771 D | High speed steel tips for turning and planing tools, form D |
| DIN 7712 | Ebonite sheets |
| DIN 7713 | Ebonite bars of round section |
| DIN 7721-1 | Synchronous belt drives, metric pitch, synchronous belts |
| DIN 7753-1 | Endless narrow V-belt for engineering |
| DIN 7753-3 | Endless narrow V-belts for the automotive industry |
| DIN 7757 20 | Valve cores, form 20 |
| DIN 7757 22 | Core chambers, form 22 |
| DIN 7757 31 | Core chambers, form 31 |
| DIN 7757 33 | Valve cores, form 33 |
| DIN 7757 34.5 | Core chambers, form 34.5 |
| DIN 7757 38 | Valve cores, form 38 |
| DIN 7757 G | Connectors for pressure gauges, form G |
| DIN 7757 R | Valve caps, form R |
| DIN 7757 S | Connectors for pressure gauges, form S |
| DIN 7757 V | Valve extensions, form V |
| DIN 7757 Vg12 | Valve caps, form Vg12 |
| DIN 7757 Vg12-Vg8 | Valve caps, form Vg12-Vg8 |
| DIN 7757 Vg8 EM | Valve caps, form Vg8 EM |
| DIN 7757 Vg8-A | Valve caps, form Vg8-A |
| DIN 7757 Vg8-B | Valve caps, form Vg8-B |
| DIN 7757 Vg8-C | Valve caps, form Vg8-C |
| DIN 7757 VP | Valve extensions, form VP |
| DIN 7757 W | Connectors for pressure gauges, form W |
| DIN 7867 | V-ribbed belt |
| DIN 7867 | Wedge rib washers |
| DIN 787 | Screws for T-slots |
| DIN 791 | Expanded metal |
| DIN 7954 A | Hinges rolled, form A |
| DIN 7954 B | Hinges rolled, form B |
| DIN 7954 C | Hinges rolled, form C |
| DIN 7954 D | Hinges rolled, form D |
| DIN 7955 A | Hinges forged, form A |
| DIN 7955 B | Hinges forged, form B |
| DIN 7955 C | Hinges forged, form C |
| DIN 7955 D | Hinges forged, form D |
| DIN 7956 | Continuous hinges, rolled |
| DIN 7957 | Flap hinges, rolled |
| DIN 7964 KA | Bolts and screws with coarse thread and reduced shank, form KA |
| DIN 7964 KAE | Bolts and screws with coarse thread and reduced shank, form KAE |
| DIN 7964 KB | Bolts and screws with coarse thread and reduced shank, form KB |
| DIN 7964 KBE | Bolts and screws with coarse thread and reduced shank, form KBE |
| DIN 7964 KCE-H | Bolts and screws with coarse thread and reduced shank, form KCE-H |
| DIN 7964 KCE-Z | Bolts and screws with coarse thread and reduced shank, form KCE-Z |
| DIN 7964 KC-H | Bolts and screws with coarse thread and reduced shank, form KC-H |
| DIN 7964 KC-Z | Bolts and screws with coarse thread and reduced shank, form KC-Z |
| DIN 7964 KD1 | Bolts and screws with coarse thread and reduced shank, form KD1 |
| DIN 7964 KD2 | Bolts and screws with coarse thread and reduced shank, form KD2 |
| DIN 7964 KDE | Bolts and screws with coarse thread and reduced shank, form KDE |
| DIN 7964 KE | Bolts and screws with coarse thread and reduced shank, form KE |
| DIN 7964 KEE | Bolts and screws with coarse thread and reduced shank, form KEE |
| DIN 7964 KF | Bolts and screws with coarse thread and reduced shank, form KF |
| DIN 7964 KGE | Bolts and screws with coarse thread and reduced shank, form KGE |
| DIN 7964 LA | Bolts and screws with coarse thread and long shank, form LA |
| DIN 7964 LAE | Bolts and screws with coarse thread and long shank, form LAE |
| DIN 7964 LB | Bolts and screws with coarse thread and long shank, form LB |
| DIN 7964 LBE | Bolts and screws with coarse thread and long shank, form LBE |
| DIN 7964 LCE-H | Bolts and screws with coarse thread and long shank, form LCE-H |
| DIN 7964 LCE-Z | Bolts and screws with coarse thread and long shank, form LCE-Z |
| DIN 7964 LC-H | Bolts and screws with coarse thread and long shank, form LC-H |
| DIN 7964 LC-Z | Bolts and screws with coarse thread and long shank, form LC-Z |
| DIN 7964 LD1 | Bolts and screws with coarse thread and long shank, form LD1 |
| DIN 7964 LD2 | Bolts and screws with coarse thread and long shank, form LD2 |
| DIN 7964 LDE | Bolts and screws with coarse thread and long shank, form LDE |
| DIN 7964 LE | Bolts and screws with coarse thread and long shank, form LE |
| DIN 7964 LEE | Bolts and screws with coarse thread and long shank, form LEE |
| DIN 7964 LF | Bolts and screws with coarse thread and long shank, form LF |
| DIN 7964 LGE | Bolts and screws with coarse thread and long shank, form LGE |
| DIN 7965 | Screwed inserts |
| DIN 7967 | Self locking counter nuts |
| DIN 7968 | Hexagon fit bolts |
| DIN 7968 Mu | Hexagon fit bolts with hexagon nut for steel structures |
| DIN 7969 | Slotted countersunk flat head screws |
| DIN 7969 Mu | Slotted countersunk head bolts with hexagon nut for steel structures |
| DIN 797 | Anchor screws |
| DIN 7971 C | Slotted pan head tapping screws, form C |
| DIN 7971 F | Slotted pan head tapping screws, form F |
| DIN 7972 B | Countersunk flat head tapping screws with slot, form B |
| DIN 7972 BZ | Countersunk flat head tapping screws with slot, form BZ |
| DIN 7973 B | Raised countersunk oval head tapping screws with slot, form B |
| DIN 7973 BZ | Raised countersunk oval head tapping screws with slot, form BZ |
| DIN 7976 C | Hexagon head tapping screws, form C |
| DIN 7976 F | Hexagon head tapping screws, form F |
| DIN 7977 | Taper pins with thread and constant threaded part |
| DIN 7978 A | Taper pins with inner thread, no hardened, form A |
| DIN 7978 B | Taper pins with inner thread, no hardened, form B |
| DIN 7979 C | Parallel pins, with internal thread, unhardened, form C |
| DIN 7979 D | Parallel pins, with internal thread, hardened, form D |
| DIN 7980 | Spring lock washers for screws with cylindrical heads (Attention: recalled without substitution) |
| DIN 7981 C-H | Pan head tapping screws with cross recessed, form C |
| DIN 7981 C-Z | Cross recessed Z pan head tapping screws, form C |
| DIN 7981 F-H | Cross recessed H pan head tapping screws, form F |
| DIN 7981 F-Z | Cross recessed Z pan head tapping screws, form F |
| DIN 7982 C-H | Cross recessed H countersunk head tapping screws, form C |
| DIN 7982 C-Z | Cross recessed countersunk head tapping screws, form C |
| DIN 7982 F-H | Cross recessed H countersunk head tapping screws, form F |
| DIN 7982 F-Z | Cross recessed countersunk head tapping screws, form F |
| DIN 7983 C-H | Cross recessed raised countersunk head H tapping screws, Form C |
| DIN 7983 C-Z | Cross recessed raised countersunk head Z tapping screws, form C |
| DIN 7983 F-H | Cross recessed raised countersunk head H tapping screws, form F |
| DIN 7983 F-Z | Cross recessed raised countersunk head Z tapping screws, form F |
| DIN 7984 | Hexagon socket head cap screws with low head with reduced loadability |
| DIN 7985 H | Cross recessed raised cheese head screws H |
| DIN 7985 Z | Cross recessed raised cheese head screws Z |
| DIN 7989-1 | Washers for steel structures - Part 1: Product grade C |
| DIN 7989-2 | Washers for steel structures - Part 2: Product grade A |
| DIN 7990 | Hexagon bolts without nut for steel structures |
| DIN 7990 Mu | Hexagon bolts with nut |
| DIN 7991 | Hexagon socket countersunk head screws |
| DIN 799-1 A | Foundation blocks, form A |
| DIN 799-1 B | Foundation blocks, form B |
| DIN 7992 | T-head bolts with large head |
| DIN 7993 A | Circular wire snap-rings for drills, form A |
| DIN 7993 B | Circular wire snap-rings for drills, form B |
| DIN 7995 H | Cross recessed raised countersunk head wood screws, form H |
| DIN 7995 Z | Cross recessed raised countersunk head wood screws, form Z |
| DIN 7996 H | Cross recessed half round head wood screws, form H |
| DIN 7996 Z | Cross recessed half round head wood screws, form Z |
| DIN 7997 H | Cross recessed countersunk head wood screws, form H |
| DIN 7997 Z | Cross recessed countersunk head wood screws, form Z |
| DIN 7999 | High tensile strength hexagon fit bolts with large width across flats for stuctural bolting |
DIN8X
| DIN 8010 | Carbide tips for drills; tip angle 115° for major service loads |
| DIN 8011 | Carbide tips for reamers, counterbores and shank-type cutters, Type R |
| DIN 8011 | Carbide tips for reamers, counterbores and shank-type cutters, Type T |
| DIN 8013 | Carbide tips for drills; tip angle 85° for minor service loads |
| DIN 8022 | Shell core drills with hard metal tips |
| DIN 8026 | Slotting end mills with Morse taper shank with carbide tips |
| DIN 8027 A | Slotting end mills with parallel shanks with carbide tips, form A |
| DIN 8027 B | Slotting end mills with parallel shanks with carbide tips, form B |
| DIN 8030 A | Face milling cutters for indexable inserts, form A |
| DIN 8030 B | Face milling cutters for indexable inserts, form B |
| DIN 8030 C | Face milling cutters for indexable inserts, form C |
| DIN 8031 | Side and face milling (sloatting) cutters for indexable inserts |
| DIN 8033-10 RBF | Hard metal burrs, arch round nose burrs, form RBF |
| DIN 8033-12 TRE | Hard metal burrs, oval burrs, form TRE |
| DIN 8033-2 ZYA | Hard metal burrs, cylindrical burrs, form ZYA |
| DIN 8033-3 WRC | Hard metal burrs, cylindrical round nose burrs, form WRC |
| DIN 8033-4 SKM | Hard metal burrs, conical pointed nose, form SKM |
| DIN 8033-5 KEL | Hard metal burrs, conical round nose burrs, form KEL |
| DIN 8033-6 KSJ | Hard metal burrs, 60 degree cone burrs, form KSJ |
| DIN 8033-6 KSK | Hard metal burrs, 90 degree cone burrs, form KSK |
| DIN 8033-7 WKN | Hard metal burrs, inverted cone burrs, form WKN |
| DIN 8033-8 KUD | Hard metal burrs, spherical burrs, form KUD |
| DIN 8033-9 SPG | Hard metal burrs, arch pointed nose burrs, form SPG |
| DIN 8037 | Twist drills with parallel shank with carbide tips |
| DIN 8038 | Twist drills with parallel shank with carbide tips for drilling plastics (thermosetting plastics) |
| DIN 8039 | Parallel shank rock drills with carbide tip |
| DIN 80402-1 5 | Safety chains - Part 1: Chains for small part security - Eyes |
| DIN 80402-1 6 | Safety chains - Part 1: Chains for small part security - S-hooks |
| DIN 80402-1 7 | Safety chains - Part 1: Chains for small part security - S-hooks |
| DIN 80402-1 A | Locking chains - Assembly, component parts, form A |
| DIN 80402-1 B | Locking chains - Assembly, component parts, form B |
| DIN 80402-1 C | Locking chains - Assembly, component parts, form C |
| DIN 80402-1 D | Locking chains - Assembly, component parts, form D |
| DIN 80402-1 E | Locking chains - Assembly, component parts, form E |
| DIN 8041 | Twist drills with morse taper shank with carbide tips |
| DIN 8043 | Core drills with carbide tips |
| DIN 8044 A | End mills with parallel shanks with hardmetal tips, form A |
| DIN 8044 B | End mills with parallel shanks with hardmetal tips, form B |
| DIN 8045 | End mills with Morse taper shank with hard metal tips |
| DIN 8047 A | Side milling cutters, carbide-tipped, form A |
| DIN 8047 B | Side milling cutters, carbide-tipped, form B |
| DIN 8048 | Side milling cutters with exchangeable blades, hard material cutting edges |
| DIN 8050 A | Machine-reamers with parallel shanks with carbide tips with short cutting part, form A straight fluted |
| DIN 8050 B | Machine-reamers with parallel shanks with carbide tips with short cutting part, form B diagonally slotted |
| DIN 8051 A | Machine reamers for Morse taper shank with carbide tips with short cutting part, form A straight fluted |
| DIN 8051 B | Machine reamers for Morse taper shank with carbide tips with short cutting part, form B diagonally slotted |
| DIN 8054 | Shell reamers with carbide tips |
| DIN 8056 | Shell end cylindrical milling cutters with tenon drive, with carbide tips |
| DIN 806 | Centering points with full point and metric cone |
| DIN 806 E | Centering points with full point and carbide insert, morse cone |
| DIN 806 H | Centering points with flattened point and morse cone |
| DIN 806 HE | Centering points with flattened point and carbide insert, morse cone |
| DIN 8062 | Unplasticised polyvinyl chlorid pipes |
| DIN 8063-6 W1 | Pipe connections and form pieces, form W1 |
| DIN 8063-6 W1 G | Pipe connections and form pieces, form W1 G |
| DIN 8063-6 W2 | Pipe connections and form pieces, form W2 |
| DIN 807 | Lathe centres 60° with nut |
| DIN 80701 | Toggle nuts |
| DIN 80704 | Bow nuts, metric screw thread |
| DIN 80705 | Thin nuts with small widths across flats |
| DIN 8072 | Pipes of polyethylene, soft |
| DIN 8074 | Pipes of polyethylene (PE) PE 80, PE 100 |
| DIN 8077 | Polypropylene pipes |
| DIN 8079 | Chlorinated polyvinyl chloride (PCC-C) pipes |
| DIN 808 D | Cardan joints, form D |
| DIN 808 E | Cardan joints, form E |
| DIN 8083 | Carbide tipped circular saw blades for wood |
| DIN 8089 A | Stub reamers, form A straight fluted |
| DIN 8089 B | Stub reamers, form B swirl fluted |
| DIN 8089 C | Stub reamers, form C peeling |
| DIN 8090 A | Stub reamers with hard metall tips, form A straight fluted |
| DIN 8090 B | Stub reamers with hard metall tips, form B diagonally slotted left-handed |
| DIN 8090 C | Stub reamers with hard metall tips, form C diagonally slotted right-handed |
| DIN 8093 A | Machine reamers with parallel shanks with carbide tips with long cutting part, form A straight fluted |
| DIN 8093 B | Machine reamers with parallel shanks with carbide tips with long cutting part, form B diagonally slotted |
| DIN 8094 A | Machine reamers for Morse taper shank with carbide tips with long cutting part, form A straight fluted |
| DIN 8094 B | Machine reamers for Morse taper shank with carbide tips with long cutting part, form B diagonally slotted |
| DIN 8096-1 | End mills type A for indexable inserts with parallel shanks |
| DIN 8096-2 | End mills type A for indexable inserts with Morse taper shanks |
| DIN 8140-1 A | Wire thread inserts for ISO metric screw threads, form A |
| DIN 8140-1 B | Wire thread inserts for ISO metric screw threads, form B |
| DIN 81402 A | Hinges for ship's cabinet doors, for screwing on, form A |
| DIN 81402 B | Hinges for ship's cabinet doors, for screwing on, form B |
| DIN 81402 C | Hinges for ship's cabinet doors, for screwing on, form C |
| DIN 81402 D | Hinges for ship's cabinet doors, for screwing on, form D |
| DIN 81402 E | Hinges for ship's cabinet doors, for screwing on, form E |
| DIN 81402 F | Hinges for ship's cabinet doors, for screwing on, form F |
| DIN 81402 G | Hinges for ship's cabinet doors, for screwing on, form G |
| DIN 81408 A | Screwing-hooks, form A |
| DIN 81408 B | Screwing-hooks, form B |
| DIN 81408 C | Screwing-hooks, form C |
| DIN 81408 D | Screwing-hooks, form D |
| DIN 81410 A | Pin bolts - Coarse type made of steel, form A |
| DIN 81410 A/B | Pin bolts - Coarse type made of steel, bolt set, form A/B |
| DIN 81410 B | Pin bolts - Coarse type made of steel, locking clamp, form B |
| DIN 81410 C | Pin bolts - Coarse type made of steel, pin bolt with locking position, form C |
| DIN 81410 D | Pin bolts - Coarse type made of steel, plate, form D |
| DIN 81415 A | Turnbuckles for furniture and fitments for furniture and fitments, form A |
| DIN 81415 B | Turnbuckles for furniture and fitments for furniture and fitments, form B |
| DIN 81415 C | Turnbuckles for furniture and fitments for furniture and fitments, form C |
| DIN 81415 D | Turnbuckles for furniture and fitments for furniture and fitments, form D |
| DIN 81416 A | Entering catches, light type, for furniture and fitments, form A |
| DIN 81416 B | Entering catches, light type, for furniture and fitments, form B |
| DIN 81416 C | Entering catches, light type, for furniture and fitments, form C |
| DIN 81416 D | Entering catches, light type, for furniture and fitments, form D |
| DIN 81416 E | Entering catches, light type, for furniture and fitments, form E |
| DIN 8150 | Gall's chains |
| DIN 8150 A | End clips, form A |
| DIN 8150 B | End bolts, form B |
| DIN 8150 C | End bolts, form C |
| DIN 8150 D | Catch bolts, form D |
| DIN 8150 E | Connector bolts, form E |
| DIN 8187-1 | Roller chains - European type - Part 1 |
| DIN 8187-1 A | Liaisons |
| DIN 8187-1 B | Liaisons |
| DIN 8187-1 C | Liaisons |
| DIN 8187-1 E | Liaisons |
| DIN 8187-1 L | Liaisons |
| DIN 8187-1 S | Liaisons |
| DIN 8187-2 K1 | Roller chains - European type - Part 2: Simple roller chains with attachments, type K1 |
| DIN 8187-2 K2 | Roller chains - European type - Part 2: Simple roller chains with attachments, type K2 |
| DIN 8187-2 M1 | Roller chains - European type - Part 2: Simple roller chains with attachments, type M1 |
| DIN 8187-2 M2 | Roller chains - European type - Part 2: Simple roller chains with attachments, type M2 |
| DIN 8187-3 E2 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type E2 |
| DIN 8187-3 E3 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type E3 |
| DIN 8187-3 Z2 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type Z2 |
| DIN 8187-3 Z3 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type Z3 |
| DIN 8192 A | Chain wheels for roller chains as specified in DIN ISO 606, form A |
| DIN 8192 B | Chain wheels for roller chains as specified in DIN ISO 606, form B |
| DIN 82004-1 1 | Turnbuckles |
| DIN 82004-1 A | Turnbuckles with oval eye, form A |
| DIN 82004-1 B | Turnbuckles with double lug, form B |
| DIN 82004-1 C | Turnbuckles with stud eye head fittings, form C |
| DIN 82004-1 D | Turnbuckles with double lug and stud eye head fittings, form D |
| DIN 82004-1 E | Turnbuckles with double lug and oval eye, form E |
| DIN 82004-2 1 | Turnbuckles |
| DIN 82004-2 A | Turnbuckles with oval eye, form A |
| DIN 82004-2 B | Turnbuckles with double lug, form B |
| DIN 82004-2 C | Turnbuckles with stud eye head fittings, form C |
| DIN 82004-2 D | Turnbuckles with double lug and stud eye head fittings, form D |
| DIN 82004-2 E | Turnbuckles with double lug and oval eye, form E |
| DIN 82006 B | Oval eye head fittings with metric thread for swivels, form B |
| DIN 82006 C | Oval eye head fittings with metric thread for turnbuckles, form C |
| DIN 82006 D | Oval eye head fittings with metric thread for turnbuckles, form D |
| DIN 82008-1 B | Double lug head fittings with threaded shank – Part 1: For swivels and turnbuckles, non-alloy quality steel, form B |
| DIN 82008-1 C | Double lug head fittings with threaded shank – Part 1: For swivels and turnbuckles, non-alloy quality steel, with right-hand thread, form C |
| DIN 82008-1 D | Double lug head fittings with threaded shank – Part 1: For swivels and turnbuckles, non-alloy quality steel, with left-hand thread, form D |
| DIN 82008-2 C | Double lug head fittings with threaded shank – Part 2: For turnbuckles, stainless steel, with right-hand thread, form C |
| DIN 82008-2 D | Double lug head fittings with threaded shank – Part 2: For turnbuckles, stainless steel, with left-hand thread, form D |
| DIN 82010 B | Stud eye head fittings with metric thread for swivels, form B |
| DIN 82010 C | Stud eye head fittings with metric thread for turnbuckles, form C |
| DIN 82010 D | Stud eye head fittings with metric thread for turnbuckles, form D |
| DIN 82016 1 | Brackets, ser. no. 1 |
| DIN 82016 3 | Brackets, ser. no. 3 |
| DIN 82016 A | Cargo shackles, form A |
| DIN 82016 B | Cargo shackles, form B |
| DIN 82101 A | Shackles, form A |
| DIN 82101 B | Shackles, form B |
| DIN 82101 C | Shackles, form C |
| DIN 82101 F1 | Brackets, form F1 |
| DIN 82101 F2 | Brackets, form F2 |
| DIN 82101 F3 | Brackets, form F3 |
| DIN 82101 G4 | Bolts, form G4 |
| DIN 82101 G5 | Bolts, form G5 |
| DIN 82101 G6 | Bolts, form G6 |
| DIN 82101 G7 | Bolts, form G7 |
| DIN 82102 | Components for lifting, towing, lashing - Shackle dee - Stainless steels |
| DIN 8221 | Bushings for plain bearings |
| DIN 8243 A | Slotted cheese head screws for fine mechanics |
| DIN 8243 B | Slotted cheese head screws for fine mechanics |
| DIN 8243 C | Slotted cheese head screws for fine mechanics |
| DIN 8245 | Sloted countersunk (flat) head screws for fine mechanics |
| DIN 825 A | Signs, form A |
| DIN 825 AL | Signs, form AL |
| DIN 825 AP | Signs, form AP |
| DIN 825 B | Signs, form B |
| DIN 825 C | Signs, form C |
| DIN 825 D | Signs, form D |
| DIN 825 E | Signs, form E |
| DIN 83104 1 | Latch |
| DIN 83104 2 | Axis with pusher |
| DIN 83104 3 | Axis with square pin |
| DIN 83104 4 | Axis with a flat head |
| DIN 83104 5 | Sleeves |
| DIN 83104 A | Dogs for heavy hinged doors on ships and for hatches, form A |
| DIN 83104 B | Dogs for heavy hinged doors on ships and for hatches, form B |
| DIN 83104 C | Dogs for heavy hinged doors on ships and for hatches, form C |
| DIN 835 | Studs - Metal end approx. 2d |
| DIN 8374 A | Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws, form A |
| DIN 8374 B | Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws, form B |
| DIN 8375 | Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws |
| DIN 8376 | Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws |
| DIN 8377 | Subland twist drills with Morse taper shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws |
| DIN 8378 | Subland twist drills with parallel shank for holes prior to tapping screw threads |
| DIN 8379 | Subland twist drills with Morse taper shank for holes prior to tapping screw threads |
| DIN 838 | Box wrenches, double head, deep offset, with unequel openings |
| DIN 84 | Slotted cheese head screws, accordingin to ISO 1207 |
| DIN 842-1 A | Angular cutters with plain bore, form A |
| DIN 844-1 A | End mills with parallel shank, form A |
| DIN 844-1 B | End mills with parallel shank, form B |
| DIN 844-1 D | End mills with parallel shank, form D |
| DIN 844-1 E | End mills with parallel shank, form E |
| DIN 845-1 B | End mills with Morse taper shank, form B |
| DIN 845-1 C | End mills with Morse taper shank, form C |
| DIN 847 | Double equal-angle milling cutters |
| DIN 85 | Slotted pan head screws, Product grade A |
| DIN 850-1 A | Woodruff keyseat cutters, form A |
| DIN 850-1 B | Woodruff keyseat cutters, form B |
| DIN 850-1 C | Woodruff keyseat cutters, form C |
| DIN 850-1 D | Woodruff keyseat cutters, form D |
| DIN 850-1 E | Woodruff keyseat cutters, form E |
| DIN 850-1 F | Woodruff keyseat cutters, form F |
| DIN 850-1 G | Woodruff keyseat cutters, form G |
| DIN 850-1 H | Woodruff keyseat cutters, form H |
| DIN 851 AA | T-slot cutters with parallel shanks, form AA |
| DIN 851 AB | T-slot cutters with parallel shanks, form AB |
| DIN 851 AD | T-slot cutters with parallel shanks, form AD |
| DIN 851 AE | T-slot cutters with parallel shanks, form AE |
| DIN 851-1 AA | T-slot cutters with parallel shanks, form AA |
| DIN 851-1 AB | T-slot cutters with parallel shanks, form AB |
| DIN 851-1 AD | T-slot cutters with parallel shanks, form AD |
| DIN 851-1 AE | T-slot cutters with parallel shanks, form AE |
| DIN 851-2 B | T-slot cutters with Morse taper shank, form B |
| DIN 852-1 | Shell type thread milling cutters for ISO metric threads |
| DIN 8535 | Threaded nozzles |
| DIN 8541-3 | Hoses |
| DIN 855 A | Semi-circular profile milling cutters, concave, form A |
| DIN 855 B | Semi-circular profile milling cutters, concave, form B |
| DIN 856 | Convex milling cutters |
| DIN 8576 | Segment saw blades for cold circular saws |
| DIN 859 A | Hand reamers with parallel shanks - adjustable, slotted, form A straight fluted |
| DIN 859 B | Hand reamers with parallel shanks - adjustable, slotted, form B swirl fluted |
| DIN 86087 S | Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections, form S |
| DIN 86087 W | Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections, form W |
| DIN 86088 S | Fittings for butt welding into copper-nickel-alloy pipelines - Teees, form S |
| DIN 86088 W | Fittings for butt welding into copper-nickel-alloy pipelines - Teees, form W |
| DIN 86089 S | Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers, form S |
| DIN 86089 W | Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers, form W |
| DIN 86090 S | Fittings for butt welding into copper-nickel-alloy pipelines - Elbows, form S |
| DIN 86090 W | Fittings for butt welding into copper-nickel-alloy pipelines - Elbows, form W |
| DIN 86103 B | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form B |
| DIN 86103 C | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form C |
| DIN 86103 E | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form E |
| DIN 86103 F | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form F |
| DIN 86501 ARS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form ARS |
| DIN 86501 AS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form AS |
| DIN 86501 CRS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form CRS |
| DIN 86501 CS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form CS |
| DIN 86501 DRS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form DRS |
| DIN 86501 DS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form DS |
| DIN 87901 C | Valves for pumps |
| DIN 8809 | Circular tool steel saw blades for woodworking |
| DIN 884-1 | Solid cylindrical cutters |
| DIN 885 A | Side and face milling cutters, form A |
| DIN 885 B | Side and face milling cutters, form B |
| DIN 885 C | Side and face milling cutters, form C |
| DIN 885 D | Side and face milling cutters, form D |
| DIN 885 E | Side and face milling cutters, form E |
| DIN 885 F | Side and face milling cutters, form F |
| DIN 885-1 A | Side and face milling cutters, form A |
| DIN 885-1 B | Side and face milling cutters, form B |
| DIN 8906 E1 | Flared flange solderless compression couplings, PN 40, form E1 |
| DIN 8906 T2 | Flared flange solderless compression couplings, PN 40, form T2 |
| DIN 8906 T2/NS4 | Flared flange solderless compression couplings, PN 40, form T2/NS4 |
| DIN 8906 TR2.1 | Flared flange solderless compression couplings, PN 40, form TR2.1 |
| DIN 8906 TR2.2 | Flared flange solderless compression couplings, PN 40, form TR2.2 |
| DIN 8906 U1 | Flared flange solderless compression couplings, PN 40, form U1 |
| DIN 8906 U1.1 | Flared flange solderless compression couplings, PN 40, form U1.1 |
| DIN 8906 U2 | Flared flange solderless compression couplings, PN 40, form U2 |
| DIN 8906 UR2 | Flared flange solderless compression couplings, PN 40, form UR2 |
| DIN 8906 UR3 | Flared flange solderless compression couplings, PN 40, form UR3 |
| DIN 8906 US3 | Flared flange solderless compression couplings, PN 40, form US3 |
| DIN 8906 US3.1 | Flared flange solderless compression couplings, PN 40, form US3.1 |
| DIN 8914 B1 | Seal bonnets for 90° flared flange solderless compression couplings rated for PN 40, form B1 |
| DIN 8914 B2 | Gaskets for 90° flared flange solderless compression couplings rated for PN 40, form B2 |
| DIN 89280-2 1 | Glands for cables and cords, adapter an cast und pressed parts, pos. no. 1 |
| DIN 89280-2 2 | Glands for cables and cords, adapter for positive connections, pos. no. 2 |
| DIN 89280-2 3 | Glands for cables and cords, adapter for bolted connections, pos. no. 3 |
| DIN 89280-2 4 | Glands for cables and cords, flat nuts, pos. no. 4 |
| DIN 89280-2 5 | Glands for cables and cords, screw bushings, long, pos. no. 5 |
| DIN 89280-2 6 | Glands for cables and cords, screw bushings, short, pos. no. 6 |
| DIN 894 | Single-head engineers jaw wrenches |
| DIN 895 | Engineers wrenches, double head, open end, with unequal jaw widths |
| DIN 896 A | Tee handled socket wrenches, double end, form A |
| DIN 896 B | Tee handled socket wrenches, double end, form B |
DIN9X
| DIN 9 A | Hand taper pin reamers, form A straight fluted |
| DIN 9 B | Hand taper pin reamers, form B swirl fluted with swerve to the left |
| DIN 900 A | Tommy bars for socket wrenches, form A |
| DIN 900 C | Tommy bars for socket wrenches, form C |
| DIN 9021 | Washers with outside diameter ca. 3 x nominal thread diameter |
| DIN 904 | Tee wrenches, socket single square |
| DIN 906 | Internal drive pipe plugs, conical thread |
| DIN 906 ISR | Pipe plugs with hexalobular, conical thread |
| DIN 906 IVZ | Pipe plugs with internal serration, conical thread |
| DIN 908 | Hexagon socket screw plugs with collar, cylindrical thread |
| DIN 908 ISR | Plug screws with collar and hexagon socket (ISR) according to DIN EN ISO 10664, cylindrical thread |
| DIN 908 IVZ | Plug screws with collar and internal serration (IVZ) in accordance with DIN 34824, cylindrical thread |
| DIN 908 L-ISK | Hexagon socket screw plugs with collar, type L - light version, cylindrical thread |
| DIN 908 L-ISR | Plug screws with collar and hexagon socket (ISR) according to DIN EN ISO 10664, type L - light version, cylindrical thread |
| DIN 908 L-IVZ | Plug screws wirh collar and internal serration (IVZ) in accordance with DIN 34824, type L - light version, cylindrical thread |
| DIN 909 | Hexagon head pipe plugs, conical thread |
| DIN 910 | Hexagon head screws plugs with collar, cylindrical thread, rule execution |
| DIN 910 L | Hexagon head screws plugs with collar, cylindrical thread, type L (light version) |
| DIN 9107 | Round tubes of wrought aluminium and aluminium alloys |
| DIN 912 | Hexagon socket head cap screws |
| DIN 913 | Hexagon socket set screws with flat point |
| DIN 914 | Hexagon socket set screws with cone point |
| DIN 915 | Hexagon socket set screws with dog point |
| DIN 916 | Hexagon socket set screws with cup point |
| DIN 917 A | Hexagon cap nuts, low type, type A |
| DIN 917 B | Hexagon cap nuts, low type, type B |
| DIN 920 | Slotted pan head screws with small head |
| DIN 921 | Slotted pan head screws with large head |
| DIN 922 | Slotted pan head screws, small head and stud |
| DIN 923 | Slotted pan head screws with shoulder |
| DIN 924 | Slotted raised countersunk head screws with dog point |
| DIN 925 | Slotted countersunk flat head screws and pivot |
| DIN 926 | Slotted set screws with full dog point |
| DIN 927 | Pin screw slotted |
| DIN 928 | Square weld nuts |
| DIN 929 | Hexagonal weld nuts |
| DIN 93 | Washers with tap |
| DIN 931-1 | Hexagon head bolts with shank, product classes A and B |
| DIN 931-2 | Hexagon head bolts, metric thread M42 to M160 x 6, product grade B |
| DIN 933 | Hexagon set screws with thread to head, product groups A and B |
| DIN 934 | Hexagon nuts |
| DIN 935-1 | Hexagon slotted and castle nuts, metric coarse and fine pitch thread, product grades A and B |
| DIN 935-3 | Hexagon slotted nuts, metric coarse pitch thread, product grade C |
| DIN 936 | Hexagon thin nuts |
| DIN 937 | Hexagon thin slotted and castle nuts |
| DIN 938 | Studs - Metal end approx. 1d |
| DIN 939 | Studs - Metal end approx. 1.25d |
| DIN 94 | Split pins |
| DIN 940 | Studs - Metal end approx. 2.5d |
| DIN 949-1 A | Studs with metric interference thread MFS - Part 1: Lengths of engagenent = 2d (Type A) |
| DIN 949-2 B | Studs with metric interference thread MFS - Part 1: Lengths of engagement = 2.5d (Type B) |
| DIN 95 | Recessed raised countersunk head wood screws, with slot |
| DIN 950 B | Handwheels angulate, form B |
| DIN 950 N | Handwheels angulate, form N |
| DIN 950 V | Handwheels angulate, form V |
| DIN 95363 A | Elastomer mounts, stud mounts, form A |
| DIN 95363 B | Elastomer mounts, stud mounts, form B |
| DIN 95363 C | Elastomer mounts, stud mounts, form C |
| DIN 95363 D | Elastomer mounts, stud mounts, form D |
| DIN 95363 E | Elastomer mounts, stud mounts, form E |
| DIN 95363 F | Elastomer mounts, stud mounts, form F |
| DIN 95364 A | Elastomer mounts, buffer, form A |
| DIN 95364 B | Elastomer mounts, buffer, form B |
| DIN 95364 C | Elastomer mounts, buffer, form C |
| DIN 95364 D | Elastomer mounts, buffer, form D |
| DIN 95364 E | Elastomer mounts, buffer, form E |
| DIN 95364 F | Elastomer mounts, buffer, form F |
| DIN 95364 G | Elastomer mounts, buffer, form G |
| DIN 96 | Slotted half round head wood screws |
| DIN 960 | Hexagon set screws with shank, metric fine thread |
| DIN 961 | Hexagon set screws with thread to head, fine thread |
| DIN 963 A | Slotted countersunk flat head screws, Thread to the head |
| DIN 963 C | Slotted countersunk flat head screws, with shaft |
| DIN 964 A | Slotted raised countersunk (oval) head screws, thread to the head |
| DIN 964 C | Slotted raised countersunk (oval) head screws, with shaft |
| DIN 965 A-H | Cross recessed H countersunk (flat) head screws, thread up to head |
| DIN 965 A-Z | Cross recessed Z countersunk (flat) head screws, thread up to head |
| DIN 965 C-H | Cross recessed H countersunk (flat) head screws, incl. shaft |
| DIN 965 C-Z | Cross recessed Z countersunk (flat) head screws, incl. shaft |
| DIN 966 A-H | Cross recessed countersunk H (oval) head screws, thread with head |
| DIN 966 A-Z | Cross recessed countersunk Z (oval) head screws, thread with head |
| DIN 966 C-H | Cross recessed countersunk H (oval) head screws, thread with head |
| DIN 966 C-Z | Cross recessed countersunk Z (oval) head screws, thread with head |
| DIN 967 H | Cross recessed pan head screws with collar, form H |
| DIN 967 Z | Cross recessed pan head screws with collar, form Z |
| DIN 968 C-H | Cross recessed pan head tapping screws with collar |
| DIN 968 C-Z | Cross recessed pan head tapping screws with collar |
| DIN 968 F-H | Cross recessed pan head tapping screws with collar |
| DIN 968 F-Z | Cross recessed pan head tapping screws with collar |
| DIN 968 R-H | Cross recessed pan head tapping screws with collar |
| DIN 968 R-Z | Cross recessed pan head tapping screws with collar |
| DIN 97 | Slotted countersunk flat head wood screws |
| DIN 9714 | Aluminium and Wrought Aluminium Alloy. Extruded channel sections, edges rounded |
| DIN 975 | Threaded rod |
| DIN 976-1 A | Stud bolts - Part 1: Metric thread, form A |
| DIN 976-1 B | Stud bolts - Part 1: Metric thread, form B |
| DIN 976-2 | Stud bolts, metric thread MFS |
| DIN 977 | Hexagon weld nuts with flange |
| DIN 979 | Hexagon thin slotted and castle nuts, metric coarse and fine pitch thread |
| DIN 98 D | Revolvable ball knobs |
| DIN 98 E | Revolvable ball knobs |
| DIN 980 M | Prevailing torque type hexagon nuts, all metal nuts, form M |
| DIN 980 V | Prevailing torque type hexagon nuts, all metal nuts, form V |
| DIN 981 | Locknuts |
| DIN 982 | Prevailing torque type hexagon nuts with non-metallic insert, high type |
| DIN 9825-2 D | Guide pillars for press tool sets, form D |
| DIN 9825-3 K | Guide pillars for press tool sets, form K |
| DIN 9825-4 L | Guide pillars for press tool sets, form L |
| DIN 9825-4 LA | Guide pillars for press tool sets, form LA |
| DIN 983 | Retaining rings with lugs |
| DIN 9831-1 AG | Guide bushes for press tool sets, form AG |
| DIN 9831-1 BG | Guide bushes for press tool sets, form BG |
| DIN 9831-1 CG | Guide bushes for press tool sets, form CG |
| DIN 9831-2 AW | Guide bushes for press tool sets, form AW |
| DIN 9831-2 BW | Guide bushes for press tool sets, form BW |
| DIN 9831-2 CW | Guide bushes for press tool sets, form CW |
| DIN 9832 | Holder for guide bushes large press tools |
| DIN 9833 A | Guide posts, form A |
| DIN 9833 D | Guide posts, form D |
| DIN 9834 | Guide bushes for press tools |
| DIN 9835-1 | Elastomer pressure springs for press tools |
| DIN 9835-2 A | Elastomer pressure springs for press tools, form A |
| DIN 9835-2 B | Elastomer pressure springs for press tools, form B |
| DIN 9837 | Round punches with cylindrical head |
| DIN 9839 A | Punches with ball fixation, form A |
| DIN 984 | Retaining rings with lugs |
| DIN 9840-1 D | Round punches, perforation punch with continuous shank, form D |
| DIN 9840-1 DA | Round punches, perforation punch with continuous shank, form DA |
| DIN 9840-2 C | Round punches, perforation punch with stepped shank, form C |
| DIN 9840-2 CA | Round punches, perforation punch with stepped shank, form CA |
| DIN 9840-2 E | Round punches, perforation punch with stepped shank, form E |
| DIN 9840-2 EA | Round punches, perforation punch with stepped shank, form EA |
| DIN 9841 A | Hexagon socket slotted head cap screws, form A |
| DIN 9841 B | Hexagon socket slotted head cap screws, form B |
| DIN 9843 | Round punches with ball fixation |
| DIN 9844 A | Round punches with cylindrical head, form A |
| DIN 9844 B | Round punches with cylindrical head, form B |
| DIN 9845 A | Piercing die bushes and punch guide bushes, form A |
| DIN 9845 B | Piercing die bushes and punch guide bushes, form B |
| DIN 9845 C | Piercing die bushes and punch guide bushes, form C |
| DIN 9845 D | Piercing die bushes and punch guide bushes, form D |
| DIN 9845 E | Piercing die bushes and punch guide bushes, form E |
| DIN 9846 A | Rectangular punches for press tools, form A |
| DIN 9846 B | Rectangular punches for press tools, form B |
| DIN 9846 C | Rectangular punches for press tools, form C |
| DIN 9847 | Ejectors |
| DIN 9848 | Trigger stops for cut-out |
| DIN 9849 A | Stops for cut-off, form A |
| DIN 9849 B | Stops for cut-off, form B |
| DIN 985 | Prevailing torque type hexagon nuts with non-metallic, low type |
| DIN 985 | Prevailing torque type hexagon nuts with non-metallic, low type |
| DIN 9859-2 A | Rivet shanks for press tools, form A |
| DIN 9859-2 AE | Rivet shanks for press tools, form AE |
| DIN 9859-3 CE | Screwed shanks for press tools, form CE |
| DIN 9859-4 D | Shanks for press tools, necked and flanged, form D |
| DIN 9859-4 DE | Shanks for press tools, necked and flanged, form DE |
| DIN 9859-5 E | Punch holder shanks with round cover plate, form E |
| DIN 9859-5 EE | Punch holder shanks with round cover plate, form EE |
| DIN 9859-5 EF | Punch holder shanks with round cover plate, form EF |
| DIN 9859-6 G | Rectangular flanged shanks, form G |
| DIN 9859-6 GE | Rectangular flanged shanks, form GE |
| DIN 9859-6 H | Rectangular flanged shanks, form H |
| DIN 9859-6 HE | Rectangular flanged shanks, form HE |
| DIN 9859-7 K | Screwed collar shanks for press tools, form K |
| DIN 9859-7 KE | Screwed collar shanks for press tools, form KE |
| DIN 986 | Prevailing torque type hexagon domed cap nuts with non metallic insert |
| DIN 9861-1 D | Round punches with straight shaft up to 20 mm cutting diameter, form D |
| DIN 9861-1 DA | Round punches with straight shaft up to 20 mm cutting diameter, form DA |
| DIN 9861-2 C | Round punches with stepped shaft up to 2.5 mm cutting diameter, form C |
| DIN 9861-2 CA | Round punches with stepped shaft up to 2.5 mm cutting diameter, form CA |
| DIN 9862 A | Side cutters, form A |
| DIN 9862 B | Side cutters, form B |
| DIN 9862 C | Side cutters, form C |
| DIN 9863 A | Stops for side cutter, form A |
| DIN 9863 B | Stops for side cutter, form B |
| DIN 9863 C | Stops for side cutter, form C |
| DIN 9863 D | Stops for side cutter, form D |
| DIN 9864-1 A | Round find spikes, form A |
| DIN 9864-1 B | Round find pins, form B |
| DIN 9864-1 C | Round find pins, form C |
| DIN 9864-1 D | Round find pins, form D |
| DIN 9864-1 E | Round find pins, form E |
| DIN 9864-1 F | Round find pins, form F |
| DIN 9865 | Designation plates |
| DIN 9866-1 A | Top tool holders for press tools, form A |
| DIN 9866-1 AD | Top tool holders for press tools, form AD |
| DIN 9866-1 ADE | Top tool holders for press tools, form ADE |
| DIN 9866-1 AE | Top tool holders for press tools, form AE |
| DIN 9866-2 B | Top tool holders for press tools, form B |
| DIN 9866-2 BD | Top tool holders for press tools, form BD |
| DIN 9866-2 BDE | Top tool holders for press tools, form BDE |
| DIN 9866-2 BE | Top tool holders for press tools, form BE |
| DIN 9866-3 C | Stamp heads, angular, light construction, form C |
| DIN 9866-3 CD | Stamp heads, angular, light construction, form CD |
| DIN 987 A | Rivet nuts with steel core, self-locking, form A |
| DIN 987 B | Rivet nuts with steel core, self-locking, form B |
| DIN 9873-1 A | Pressing tools, plates for tools, form A |
| DIN 9873-1 B | Pressing tools, plates for tools, form B |
| DIN 9873-1 C | Pressing tools, plates for tools, form C |
| DIN 988 | Shim rings |
| DIN 988 S | Supporting washers |
| DIN 99 K | Ball handles |
| DIN 99 L | Ball handles |
| DIN 99 M | Ball handles |
| DIN 99 N | Ball handles |
| DIN 99 P | Ball handles |
| DIN 99 R | Ball handles |
| DIN 9925 | Circular wire snap rings for shafts |
| DIN 9926 | Circular wire snap-rings for drills |
| DIN 9927 | Snap rings with rectangular profile for shafts |
